Commit d8814272 authored by Benjamin Tissoires's avatar Benjamin Tissoires Committed by Jiri Kosina

HID: use hid_hw_request() instead of direct call to usbhid

This allows the hid drivers to be independent from the transport layer.

The patch was constructed by replacing all occurences of
usbhid_submit_report() by its hid_hw_request() counterpart.
Then, drivers not requiring USB_HID anymore have their USB_HID
dependency cleaned in the Kconfig file.

Finally, few drivers still depends on USB_HID. Many of them
are requiring the io wait callback. They are found in the next patch.
Signed-off-by: default avatarBenjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>

For the sensor-hub part:
Tested-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent f3757cea
......@@ -99,7 +99,7 @@ config HID_A4TECH
config HID_ACRUX
tristate "ACRUX game controller support"
depends on USB_HID
depends on HID
---help---
Say Y here if you want to enable support for ACRUX game controllers.
......@@ -151,7 +151,7 @@ config HID_CHICONY
config HID_PRODIKEYS
tristate "Prodikeys PC-MIDI Keyboard support"
depends on USB_HID && SND
depends on HID && SND
select SND_RAWMIDI
---help---
Support for Prodikeys PC-MIDI Keyboard device support.
......@@ -173,7 +173,7 @@ config HID_CYPRESS
config HID_DRAGONRISE
tristate "DragonRise Inc. game controller"
depends on USB_HID
depends on HID
---help---
Say Y here if you have DragonRise Inc. game controllers.
These might be branded as:
......@@ -192,7 +192,7 @@ config DRAGONRISE_FF
config HID_EMS_FF
tristate "EMS Production Inc. force feedback support"
depends on USB_HID
depends on HID
select INPUT_FF_MEMLESS
---help---
Say Y here if you want to enable force feedback support for devices by
......@@ -215,7 +215,7 @@ config HID_EZKEY
config HID_HOLTEK
tristate "Holtek HID devices"
depends on USB_HID
depends on HID
---help---
Support for Holtek based devices:
- Holtek On Line Grip based game controller
......@@ -239,7 +239,7 @@ config HID_KEYTOUCH
config HID_KYE
tristate "KYE/Genius devices"
depends on USB_HID
depends on HID
---help---
Support for KYE/Genius devices not fully compliant with HID standard:
- Ergo Mouse
......@@ -397,7 +397,7 @@ config HID_MONTEREY
config HID_MULTITOUCH
tristate "HID Multitouch panels"
depends on USB_HID
depends on HID
---help---
Generic support for HID multitouch panels.
......@@ -458,7 +458,7 @@ config HID_ORTEK
config HID_PANTHERLORD
tristate "Pantherlord/GreenAsia game controller"
depends on USB_HID
depends on HID
---help---
Say Y here if you have a PantherLord/GreenAsia based game controller
or adapter.
......@@ -592,13 +592,13 @@ config HID_SONY
config HID_SPEEDLINK
tristate "Speedlink VAD Cezanne mouse support"
depends on USB_HID
depends on HID
---help---
Support for Speedlink Vicious and Divine Cezanne mouse.
config HID_STEELSERIES
tristate "Steelseries SRW-S1 steering wheel support"
depends on USB_HID
depends on HID
---help---
Support for Steelseries SRW-S1 steering wheel
......@@ -610,7 +610,7 @@ config HID_SUNPLUS
config HID_GREENASIA
tristate "GreenAsia (Product ID 0x12) game controller support"
depends on USB_HID
depends on HID
---help---
Say Y here if you have a GreenAsia (Product ID 0x12) based game
controller or adapter.
......@@ -632,7 +632,7 @@ config HID_HYPERV_MOUSE
config HID_SMARTJOYPLUS
tristate "SmartJoy PLUS PS2/USB adapter support"
depends on USB_HID
depends on HID
---help---
Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box,
Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro.
......@@ -673,7 +673,7 @@ config HID_THINGM
config HID_THRUSTMASTER
tristate "ThrustMaster devices support"
depends on USB_HID
depends on HID
---help---
Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
a THRUSTMASTER Ferrari GT Rumble Wheel.
......@@ -715,7 +715,7 @@ config HID_WIIMOTE_EXT
config HID_ZEROPLUS
tristate "Zeroplus based game controller support"
depends on USB_HID
depends on HID
---help---
Say Y here if you have a Zeroplus based game controller.
......@@ -735,7 +735,7 @@ config HID_ZYDACRON
config HID_SENSOR_HUB
tristate "HID Sensors framework support"
depends on USB_HID && GENERIC_HARDIRQS
depends on HID && GENERIC_HARDIRQS
select MFD_CORE
default n
-- help---
......
......@@ -29,14 +29,12 @@
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include <linux/module.h>
#include "hid-ids.h"
#ifdef CONFIG_HID_ACRUX_FF
#include "usbhid/usbhid.h"
struct axff_device {
struct hid_report *report;
......@@ -68,7 +66,7 @@ static int axff_play(struct input_dev *dev, void *data, struct ff_effect *effect
}
dbg_hid("running with 0x%02x 0x%02x", left, right);
usbhid_submit_report(hid, axff->report, USB_DIR_OUT);
hid_hw_request(hid, axff->report, HID_REQ_SET_REPORT);
return 0;
}
......@@ -114,7 +112,7 @@ static int axff_init(struct hid_device *hid)
goto err_free_mem;
axff->report = report;
usbhid_submit_report(hid, axff->report, USB_DIR_OUT);
hid_hw_request(hid, axff->report, HID_REQ_SET_REPORT);
hid_info(hid, "Force Feedback for ACRUX game controllers by Sergei Kolzun <x0r@dv-life.ru>\n");
......
......@@ -29,14 +29,12 @@
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include <linux/module.h>
#include "hid-ids.h"
#ifdef CONFIG_DRAGONRISE_FF
#include "usbhid/usbhid.h"
struct drff_device {
struct hid_report *report;
......@@ -68,7 +66,7 @@ static int drff_play(struct input_dev *dev, void *data,
drff->report->field[0]->value[1] = 0x00;
drff->report->field[0]->value[2] = weak;
drff->report->field[0]->value[4] = strong;
usbhid_submit_report(hid, drff->report, USB_DIR_OUT);
hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
drff->report->field[0]->value[0] = 0xfa;
drff->report->field[0]->value[1] = 0xfe;
......@@ -80,7 +78,7 @@ static int drff_play(struct input_dev *dev, void *data,
drff->report->field[0]->value[2] = 0x00;
drff->report->field[0]->value[4] = 0x00;
dbg_hid("running with 0x%02x 0x%02x", strong, weak);
usbhid_submit_report(hid, drff->report, USB_DIR_OUT);
hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
return 0;
}
......@@ -132,7 +130,7 @@ static int drff_init(struct hid_device *hid)
drff->report->field[0]->value[4] = 0x00;
drff->report->field[0]->value[5] = 0x00;
drff->report->field[0]->value[6] = 0x00;
usbhid_submit_report(hid, drff->report, USB_DIR_OUT);
hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
hid_info(hid, "Force Feedback for DragonRise Inc. "
"game controllers by Richard Walmsley <richwalm@gmail.com>\n");
......
......@@ -23,11 +23,9 @@
#include <linux/hid.h>
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/module.h>
#include "hid-ids.h"
#include "usbhid/usbhid.h"
struct emsff_device {
struct hid_report *report;
......@@ -52,7 +50,7 @@ static int emsff_play(struct input_dev *dev, void *data,
emsff->report->field[0]->value[2] = strong;
dbg_hid("running with 0x%02x 0x%02x\n", strong, weak);
usbhid_submit_report(hid, emsff->report, USB_DIR_OUT);
hid_hw_request(hid, emsff->report, HID_REQ_SET_REPORT);
return 0;
}
......@@ -104,7 +102,7 @@ static int emsff_init(struct hid_device *hid)
emsff->report->field[0]->value[4] = 0x00;
emsff->report->field[0]->value[5] = 0x00;
emsff->report->field[0]->value[6] = 0x00;
usbhid_submit_report(hid, emsff->report, USB_DIR_OUT);
hid_hw_request(hid, emsff->report, HID_REQ_SET_REPORT);
hid_info(hid, "force feedback for EMS based devices by Ignaz Forster <ignaz.forster@gmx.de>\n");
......
......@@ -29,13 +29,11 @@
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include <linux/module.h>
#include "hid-ids.h"
#ifdef CONFIG_GREENASIA_FF
#include "usbhid/usbhid.h"
struct gaff_device {
struct hid_report *report;
......@@ -63,14 +61,14 @@ static int hid_gaff_play(struct input_dev *dev, void *data,
gaff->report->field[0]->value[4] = left;
gaff->report->field[0]->value[5] = 0;
dbg_hid("running with 0x%02x 0x%02x", left, right);
usbhid_submit_report(hid, gaff->report, USB_DIR_OUT);
hid_hw_request(hid, gaff->report, HID_REQ_SET_REPORT);
gaff->report->field[0]->value[0] = 0xfa;
gaff->report->field[0]->value[1] = 0xfe;
gaff->report->field[0]->value[2] = 0x0;
gaff->report->field[0]->value[4] = 0x0;
usbhid_submit_report(hid, gaff->report, USB_DIR_OUT);
hid_hw_request(hid, gaff->report, HID_REQ_SET_REPORT);
return 0;
}
......@@ -122,12 +120,12 @@ static int gaff_init(struct hid_device *hid)
gaff->report->field[0]->value[1] = 0x00;
gaff->report->field[0]->value[2] = 0x00;
gaff->report->field[0]->value[3] = 0x00;
usbhid_submit_report(hid, gaff->report, USB_DIR_OUT);
hid_hw_request(hid, gaff->report, HID_REQ_SET_REPORT);
gaff->report->field[0]->value[0] = 0xfa;
gaff->report->field[0]->value[1] = 0xfe;
usbhid_submit_report(hid, gaff->report, USB_DIR_OUT);
hid_hw_request(hid, gaff->report, HID_REQ_SET_REPORT);
hid_info(hid, "Force Feedback for GreenAsia 0x12 devices by Lukasz Lubojanski <lukasz@lubojanski.info>\n");
......
......@@ -27,12 +27,10 @@
#include <linux/input.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include "hid-ids.h"
#ifdef CONFIG_HOLTEK_FF
#include "usbhid/usbhid.h"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Anssi Hannula <anssi.hannula@iki.fi>");
......@@ -102,7 +100,7 @@ static void holtekff_send(struct holtekff_device *holtekff,
dbg_hid("sending %*ph\n", 7, data);
usbhid_submit_report(hid, holtekff->field->report, USB_DIR_OUT);
hid_hw_request(hid, holtekff->field->report, HID_REQ_SET_REPORT);
}
static int holtekff_play(struct input_dev *dev, void *data,
......
......@@ -16,8 +16,6 @@
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usbhid/usbhid.h"
#include "hid-ids.h"
......@@ -361,7 +359,7 @@ static int kye_tablet_enable(struct hid_device *hdev)
value[4] = 0x00;
value[5] = 0x00;
value[6] = 0x00;
usbhid_submit_report(hdev, report, USB_DIR_OUT);
hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
return 0;
}
......
......@@ -68,7 +68,7 @@ static int tpkbd_features_set(struct hid_device *hdev)
report->field[2]->value[0] = data_pointer->sensitivity;
report->field[3]->value[0] = data_pointer->press_speed;
usbhid_submit_report(hdev, report, USB_DIR_OUT);
hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
return 0;
}
......@@ -332,7 +332,7 @@ static void tpkbd_led_brightness_set(struct led_classdev *led_cdev,
report = hdev->report_enum[HID_OUTPUT_REPORT].report_id_hash[3];
report->field[0]->value[0] = (data_pointer->led_state >> 0) & 1;
report->field[0]->value[1] = (data_pointer->led_state >> 1) & 1;
usbhid_submit_report(hdev, report, USB_DIR_OUT);
hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
}
static int tpkbd_probe_tp(struct hid_device *hdev)
......
......@@ -23,10 +23,8 @@
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include "usbhid/usbhid.h"
#include "hid-lg.h"
struct lg2ff_device {
......@@ -56,7 +54,7 @@ static int play_effect(struct input_dev *dev, void *data,
lg2ff->report->field[0]->value[4] = 0x00;
}
usbhid_submit_report(hid, lg2ff->report, USB_DIR_OUT);
hid_hw_request(hid, lg2ff->report, HID_REQ_SET_REPORT);
return 0;
}
......@@ -108,7 +106,7 @@ int lg2ff_init(struct hid_device *hid)
report->field[0]->value[5] = 0x00;
report->field[0]->value[6] = 0x00;
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
hid_info(hid, "Force feedback for Logitech RumblePad/Rumblepad 2 by Anssi Hannula <anssi.hannula@gmail.com>\n");
......
......@@ -22,10 +22,8 @@
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include "usbhid/usbhid.h"
#include "hid-lg.h"
/*
......@@ -92,7 +90,7 @@ static int hid_lg3ff_play(struct input_dev *dev, void *data,
report->field[0]->value[1] = (unsigned char)(-x);
report->field[0]->value[31] = (unsigned char)(-y);
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
break;
}
return 0;
......@@ -118,7 +116,7 @@ static void hid_lg3ff_set_autocenter(struct input_dev *dev, u16 magnitude)
report->field[0]->value[33] = 0x7F;
report->field[0]->value[34] = 0x7F;
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
}
......
......@@ -202,7 +202,7 @@ static int hid_lg4ff_play(struct input_dev *dev, void *data, struct ff_effect *e
value[5] = 0x00;
value[6] = 0x00;
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
break;
}
return 0;
......@@ -225,7 +225,7 @@ static void hid_lg4ff_set_autocenter_default(struct input_dev *dev, u16 magnitud
value[5] = 0x00;
value[6] = 0x00;
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
}
/* Sends autocentering command compatible with Formula Force EX */
......@@ -245,7 +245,7 @@ static void hid_lg4ff_set_autocenter_ffex(struct input_dev *dev, u16 magnitude)
value[5] = 0x00;
value[6] = 0x00;
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
}
/* Sends command to set range compatible with G25/G27/Driving Force GT */
......@@ -265,7 +265,7 @@ static void hid_lg4ff_set_range_g25(struct hid_device *hid, u16 range)
value[5] = 0x00;
value[6] = 0x00;
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
}
/* Sends commands to set range compatible with Driving Force Pro wheel */
......@@ -294,7 +294,7 @@ static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range)
report->field[0]->value[1] = 0x02;
full_range = 200;
}
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
/* Prepare "fine" limit command */
value[0] = 0x81;
......@@ -306,7 +306,7 @@ static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range)
value[6] = 0x00;
if (range == 200 || range == 900) { /* Do not apply any fine limit */
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
return;
}
......@@ -320,7 +320,7 @@ static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range)
value[5] = (start_right & 0xe) << 4 | (start_left & 0xe);
value[6] = 0xff;
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
}
static void hid_lg4ff_switch_native(struct hid_device *hid, const struct lg4ff_native_cmd *cmd)
......@@ -334,7 +334,7 @@ static void hid_lg4ff_switch_native(struct hid_device *hid, const struct lg4ff_n
for (i = 0; i < 7; i++)
report->field[0]->value[i] = cmd->cmd[j++];
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
}
}
......@@ -410,7 +410,7 @@ static void lg4ff_set_leds(struct hid_device *hid, __u8 leds)
value[4] = 0x00;
value[5] = 0x00;
value[6] = 0x00;
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
}
static void lg4ff_led_set_brightness(struct led_classdev *led_cdev,
......
......@@ -30,10 +30,8 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include "usbhid/usbhid.h"
#include "hid-lg.h"
struct dev_type {
......@@ -89,7 +87,7 @@ static int hid_lgff_play(struct input_dev *dev, void *data, struct ff_effect *ef
report->field[0]->value[2] = x;
report->field[0]->value[3] = y;
dbg_hid("(x, y)=(%04x, %04x)\n", x, y);
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
break;
case FF_RUMBLE:
......@@ -104,7 +102,7 @@ static int hid_lgff_play(struct input_dev *dev, void *data, struct ff_effect *ef
report->field[0]->value[2] = left;
report->field[0]->value[3] = right;
dbg_hid("(left, right)=(%04x, %04x)\n", left, right);
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
break;
}
return 0;
......@@ -124,7 +122,7 @@ static void hid_lgff_set_autocenter(struct input_dev *dev, u16 magnitude)
*value++ = 0x80;
*value++ = 0x00;
*value = 0x00;
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
}
int lgff_init(struct hid_device* hid)
......
......@@ -27,7 +27,6 @@
#include <linux/module.h>
#include <linux/usb.h>
#include <asm/unaligned.h>
#include "usbhid/usbhid.h"
#include "hid-ids.h"
#include "hid-logitech-dj.h"
......@@ -638,7 +637,7 @@ static int logi_dj_ll_input_event(struct input_dev *dev, unsigned int type,
hid_set_field(report->field[0], 1, REPORT_TYPE_LEDS);
hid_set_field(report->field[0], 2, data[1]);
usbhid_submit_report(dj_rcv_hiddev, report, USB_DIR_OUT);
hid_hw_request(dj_rcv_hiddev, report, HID_REQ_SET_REPORT);
return 0;
......
......@@ -736,7 +736,7 @@ static void mt_set_input_mode(struct hid_device *hdev)
r = re->report_id_hash[td->inputmode];
if (r) {
r->field[0]->value[td->inputmode_index] = 0x02;
usbhid_submit_report(hdev, r, USB_DIR_OUT);
hid_hw_request(hdev, r, HID_REQ_SET_REPORT);
}
}
......@@ -761,7 +761,7 @@ static void mt_set_maxcontacts(struct hid_device *hdev)
max = min(fieldmax, max);
if (r->field[0]->value[0] != max) {
r->field[0]->value[0] = max;
usbhid_submit_report(hdev, r, USB_DIR_OUT);
hid_hw_request(hdev, r, HID_REQ_SET_REPORT);
}
}
}
......
......@@ -118,7 +118,7 @@ static inline int ntrig_get_mode(struct hid_device *hdev)
if (!report)
return -EINVAL;
usbhid_submit_report(hdev, report, USB_DIR_IN);
hid_hw_request(hdev, report, HID_REQ_GET_REPORT);
usbhid_wait_io(hdev);
return (int)report->field[0]->value[0];
}
......@@ -137,7 +137,7 @@ static inline void ntrig_set_mode(struct hid_device *hdev, const int mode)
if (!report)
return;
usbhid_submit_report(hdev, report, USB_DIR_IN);
hid_hw_request(hdev, report, HID_REQ_GET_REPORT);
}
static void ntrig_report_version(struct hid_device *hdev)
......@@ -938,7 +938,7 @@ static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id)
/* Let the device settle to ensure the wakeup message gets
* through */
usbhid_wait_io(hdev);
usbhid_submit_report(hdev, report, USB_DIR_IN);
hid_hw_request(hdev, report, HID_REQ_GET_REPORT);
/*
* Sanity check: if the current mode is invalid reset it to
......
......@@ -142,10 +142,10 @@ struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir);
#ifdef CONFIG_DEBUG_FS
void picolcd_debug_out_report(struct picolcd_data *data,
struct hid_device *hdev, struct hid_report *report);
#define usbhid_submit_report(a, b, c) \
#define hid_hw_request(a, b, c) \
do { \
picolcd_debug_out_report(hid_get_drvdata(a), a, b); \
usbhid_submit_report(a, b, c); \
hid_hw_request(a, b, c); \
} while (0)
void picolcd_debug_raw_event(struct picolcd_data *data,
......
......@@ -18,8 +18,6 @@
***************************************************************************/
#include <linux/hid.h>
#include "usbhid/usbhid.h"
#include <linux/usb.h>
#include <linux/fb.h>
#include <linux/backlight.h>
......@@ -46,7 +44,7 @@ static int picolcd_set_brightness(struct backlight_device *bdev)
spin_lock_irqsave(&data->lock, flags);
hid_set_field(report->field[0], 0, data->lcd_power == FB_BLANK_UNBLANK ? data->lcd_brightness : 0);
if (!(data->status & PICOLCD_FAILED))
usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
hid_hw_request(data->hdev, report, HID_REQ_SET_REPORT);
spin_unlock_irqrestore(&data->lock, flags);
return 0;
}
......
......@@ -21,8 +21,6 @@
#include <linux/hid-debug.h>
#include <linux/input.h>
#include "hid-ids.h"
#include "usbhid/usbhid.h"
#include <linux/usb.h>
#include <linux/fb.h>
#include <linux/vmalloc.h>
......
......@@ -21,8 +21,6 @@
#include <linux/hid-debug.h>
#include <linux/input.h>
#include "hid-ids.h"
#include "usbhid/usbhid.h"
#include <linux/usb.h>
#include <linux/fb.h>
#include <linux/vmalloc.h>
......@@ -110,7 +108,7 @@ struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev,
work = NULL;
} else {
data->pending = work;
usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
hid_hw_request(data->hdev, report, HID_REQ_SET_REPORT);
spin_unlock_irqrestore(&data->lock, flags);
wait_for_completion_interruptible_timeout(&work->ready, HZ*2);
spin_lock_irqsave(&data->lock, flags);
......@@ -244,7 +242,7 @@ int picolcd_reset(struct hid_device *hdev)
spin_unlock_irqrestore(&data->lock, flags);
return -ENODEV;
}
usbhid_submit_report(hdev, report, USB_DIR_OUT);
hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
spin_unlock_irqrestore(&data->lock, flags);
error = picolcd_check_version(hdev);
......@@ -303,7 +301,7 @@ static ssize_t picolcd_operation_mode_store(struct device *dev,
spin_lock_irqsave(&data->lock, flags);
hid_set_field(report->field[0], 0, timeout & 0xff);
hid_set_field(report->field[0], 1, (timeout >> 8) & 0xff);
usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
hid_hw_request(data->hdev, report, HID_REQ_SET_REPORT);
spin_unlock_irqrestore(&data->lock, flags);
return count;
}
......
......@@ -19,8 +19,6 @@
#include <linux/hid.h>
#include <linux/hid-debug.h>
#include "usbhid/usbhid.h"
#include <linux/usb.h>
#include <linux/fb.h>
#include <linux/seq_file.h>
......
......@@ -20,7 +20,6 @@
#include <linux/hid.h>
#include <linux/vmalloc.h>
#include "usbhid/usbhid.h"
#include <linux/usb.h>
#include <linux/fb.h>
#include <linux/module.h>
......@@ -143,8 +142,8 @@ static int picolcd_fb_send_tile(struct picolcd_data *data, u8 *vbitmap,
else
hid_set_field(report2->field[0], 4 + i - 32, tdata[i]);
usbhid_submit_report(data->hdev, report1, USB_DIR_OUT);
usbhid_submit_report(data->hdev, report2, USB_DIR_OUT);
hid_hw_request(data->hdev, report1, HID_REQ_SET_REPORT);
hid_hw_request(data->hdev, report2, HID_REQ_SET_REPORT);
spin_unlock_irqrestore(&data->lock, flags);
return 0;
}
......@@ -214,7 +213,7 @@ int picolcd_fb_reset(struct picolcd_data *data, int clear)
hid_set_field(report->field[0], j, mapcmd[j]);
else
hid_set_field(report->field[0], j, 0);
usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
hid_hw_request(data->hdev, report, HID_REQ_SET_REPORT);
}
spin_unlock_irqrestore(&data->lock, flags);
......
......@@ -18,8 +18,6 @@
***************************************************************************/
#include <linux/hid.h>
#include "usbhid/usbhid.h"
#include <linux/usb.h>
#include <linux/fb.h>
#include <linux/lcd.h>
......@@ -48,7 +46,7 @@ static int picolcd_set_contrast(struct lcd_device *ldev, int contrast)
spin_lock_irqsave(&data->lock, flags);
hid_set_field(report->field[0], 0, data->lcd_contrast);
if (!(data->status & PICOLCD_FAILED))
usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
hid_hw_request(data->hdev, report, HID_REQ_SET_REPORT);
spin_unlock_irqrestore(&data->lock, flags);
return 0;
}
......
......@@ -21,8 +21,6 @@
#include <linux/hid-debug.h>
#include <linux/input.h>
#include "hid-ids.h"
#include "usbhid/usbhid.h"
#include <linux/usb.h>
#include <linux/fb.h>
#include <linux/vmalloc.h>
......@@ -55,7 +53,7 @@ void picolcd_leds_set(struct picolcd_data *data)
spin_lock_irqsave(&data->lock, flags);
hid_set_field(report->field[0], 0, data->led_state);
if (!(data->status & PICOLCD_FAILED))
usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
hid_hw_request(data->hdev, report, HID_REQ_SET_REPORT);
spin_unlock_irqrestore(&data->lock, flags);
}
......
......@@ -43,13 +43,11 @@
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include "hid-ids.h"
#ifdef CONFIG_PANTHERLORD_FF
#include "usbhid/usbhid.h"
struct plff_device {
struct hid_report *report;
......@@ -75,7 +73,7 @@ static int hid_plff_play(struct input_dev *dev, void *data,
*plff->strong = left;
*plff->weak = right;
debug("running with 0x%02x 0x%02x", left, right);
usbhid_submit_report(hid, plff->report, USB_DIR_OUT);
hid_hw_request(hid, plff->report, HID_REQ_SET_REPORT);
return 0;
}
......@@ -169,7 +167,7 @@ static int plff_init(struct hid_device *hid)
*strong = 0x00;
*weak = 0x00;
usbhid_submit_report(hid, plff->report, USB_DIR_OUT);
hid_hw_request(hid, plff->report, HID_REQ_SET_REPORT);
}
hid_info(hid, "Force feedback for PantherLord/GreenAsia devices by Anssi Hannula <anssi.hannula@gmail.com>\n");
......
......@@ -26,7 +26,6 @@
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/rawmidi.h>
#include "usbhid/usbhid.h"
#include "hid-ids.h"
......@@ -306,7 +305,7 @@ static void pcmidi_submit_output_report(struct pcmidi_snd *pm, int state)
report->field[0]->value[0] = 0x01;
report->field[0]->value[1] = state;
usbhid_submit_report(hdev, report, USB_DIR_OUT);
hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
}
static int pcmidi_handle_report1(struct pcmidi_snd *pm, u8 *data)
......
......@@ -18,7 +18,6 @@
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/usb.h>
#include "usbhid/usbhid.h"
#include <linux/module.h>
#include <linux/slab.h>
......@@ -204,7 +203,7 @@ int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
goto done_proc;
}
hid_set_field(report->field[field_index], 0, value);
usbhid_submit_report(hsdev->hdev, report, USB_DIR_OUT);
hid_hw_request(hsdev->hdev, report, HID_REQ_SET_REPORT);
usbhid_wait_io(hsdev->hdev);
done_proc:
......@@ -227,7 +226,7 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
ret = -EINVAL;
goto done_proc;
}
usbhid_submit_report(hsdev->hdev, report, USB_DIR_IN);
hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT);
usbhid_wait_io(hsdev->hdev);
*value = report->field[field_index]->value[0];
......@@ -262,7 +261,7 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,
spin_unlock_irqrestore(&data->lock, flags);
goto err_free;
}
usbhid_submit_report(hsdev->hdev, report, USB_DIR_IN);
hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT);
spin_unlock_irqrestore(&data->lock, flags);
wait_for_completion_interruptible_timeout(&data->pending.ready, HZ*5);
switch (data->pending.raw_size) {
......
......@@ -28,13 +28,11 @@
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include <linux/module.h>
#include "hid-ids.h"
#ifdef CONFIG_SMARTJOYPLUS_FF
#include "usbhid/usbhid.h"
struct sjoyff_device {
struct hid_report *report;
......@@ -57,7 +55,7 @@ static int hid_sjoyff_play(struct input_dev *dev, void *data,
sjoyff->report->field[0]->value[1] = right;
sjoyff->report->field[0]->value[2] = left;
dev_dbg(&dev->dev, "running with 0x%02x 0x%02x\n", left, right);
usbhid_submit_report(hid, sjoyff->report, USB_DIR_OUT);
hid_hw_request(hid, sjoyff->report, HID_REQ_SET_REPORT);
return 0;
}
......@@ -115,7 +113,7 @@ static int sjoyff_init(struct hid_device *hid)
sjoyff->report->field[0]->value[0] = 0x01;
sjoyff->report->field[0]->value[1] = 0x00;
sjoyff->report->field[0]->value[2] = 0x00;
usbhid_submit_report(hid, sjoyff->report, USB_DIR_OUT);
hid_hw_request(hid, sjoyff->report, HID_REQ_SET_REPORT);
}
hid_info(hid, "Force feedback for SmartJoy PLUS PS2/USB adapter\n");
......
......@@ -16,7 +16,6 @@
#include <linux/hid.h>
#include <linux/module.h>
#include "usbhid/usbhid.h"
#include "hid-ids.h"
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
......@@ -132,7 +131,7 @@ static void steelseries_srws1_set_leds(struct hid_device *hdev, __u16 leds)
value[14] = 0x00;
value[15] = 0x00;
usbhid_submit_report(hdev, report, USB_DIR_OUT);
hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
/* Note: LED change does not show on device until the device is read/polled */
}
......
......@@ -30,7 +30,6 @@
#include <linux/hid.h>
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/module.h>
#include "hid-ids.h"
......@@ -46,7 +45,6 @@ static const signed short ff_joystick[] = {
};
#ifdef CONFIG_THRUSTMASTER_FF
#include "usbhid/usbhid.h"
/* Usages for thrustmaster devices I know about */
#define THRUSTMASTER_USAGE_FF (HID_UP_GENDESK | 0xbb)
......@@ -103,7 +101,7 @@ static int tmff_play(struct input_dev *dev, void *data,
dbg_hid("(x, y)=(%04x, %04x)\n", x, y);
ff_field->value[0] = x;
ff_field->value[1] = y;
usbhid_submit_report(hid, tmff->report, USB_DIR_OUT);
hid_hw_request(hid, tmff->report, HID_REQ_SET_REPORT);
break;
case FF_RUMBLE:
......@@ -117,7 +115,7 @@ static int tmff_play(struct input_dev *dev, void *data,
dbg_hid("(left,right)=(%08x, %08x)\n", left, right);
ff_field->value[0] = left;
ff_field->value[1] = right;
usbhid_submit_report(hid, tmff->report, USB_DIR_OUT);
hid_hw_request(hid, tmff->report, HID_REQ_SET_REPORT);
break;
}
return 0;
......
......@@ -24,13 +24,11 @@
#include <linux/hid.h>
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/module.h>
#include "hid-ids.h"
#ifdef CONFIG_ZEROPLUS_FF
#include "usbhid/usbhid.h"
struct zpff_device {
struct hid_report *report;
......@@ -59,7 +57,7 @@ static int zpff_play(struct input_dev *dev, void *data,
zpff->report->field[2]->value[0] = left;
zpff->report->field[3]->value[0] = right;
dbg_hid("running with 0x%02x 0x%02x\n", left, right);
usbhid_submit_report(hid, zpff->report, USB_DIR_OUT);
hid_hw_request(hid, zpff->report, HID_REQ_SET_REPORT);
return 0;
}
......@@ -104,7 +102,7 @@ static int zpff_init(struct hid_device *hid)
zpff->report->field[1]->value[0] = 0x02;
zpff->report->field[2]->value[0] = 0x00;
zpff->report->field[3]->value[0] = 0x00;
usbhid_submit_report(hid, zpff->report, USB_DIR_OUT);
hid_hw_request(hid, zpff->report, HID_REQ_SET_REPORT);
hid_info(hid, "force feedback for Zeroplus based devices by Anssi Hannula <anssi.hannula@gmail.com>\n");
......
......@@ -639,7 +639,7 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re
}
}
void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
static void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
{
struct usbhid_device *usbhid = hid->driver_data;
unsigned long flags;
......@@ -648,7 +648,6 @@ void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, uns
__usbhid_submit_report(hid, report, dir);
spin_unlock_irqrestore(&usbhid->lock, flags);
}
EXPORT_SYMBOL_GPL(usbhid_submit_report);
/* Workqueue routine to send requests to change LEDs */
static void hid_led(struct work_struct *work)
......
......@@ -263,8 +263,8 @@ static void pidff_set_envelope_report(struct pidff_device *pidff,
envelope->attack_level,
pidff->set_envelope[PID_ATTACK_LEVEL].value[0]);
usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_ENVELOPE],
USB_DIR_OUT);
hid_hw_request(pidff->hid, pidff->reports[PID_SET_ENVELOPE],
HID_REQ_SET_REPORT);
}
/*
......@@ -290,8 +290,8 @@ static void pidff_set_constant_force_report(struct pidff_device *pidff,
pidff_set_signed(&pidff->set_constant[PID_MAGNITUDE],
effect->u.constant.level);
usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_CONSTANT],
USB_DIR_OUT);
hid_hw_request(pidff->hid, pidff->reports[PID_SET_CONSTANT],
HID_REQ_SET_REPORT);
}
/*
......@@ -325,8 +325,8 @@ static void pidff_set_effect_report(struct pidff_device *pidff,
pidff->effect_direction);
pidff->set_effect[PID_START_DELAY].value[0] = effect->replay.delay;
usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT],
USB_DIR_OUT);
hid_hw_request(pidff->hid, pidff->reports[PID_SET_EFFECT],
HID_REQ_SET_REPORT);
}
/*
......@@ -357,8 +357,8 @@ static void pidff_set_periodic_report(struct pidff_device *pidff,
pidff_set(&pidff->set_periodic[PID_PHASE], effect->u.periodic.phase);
pidff->set_periodic[PID_PERIOD].value[0] = effect->u.periodic.period;
usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_PERIODIC],
USB_DIR_OUT);
hid_hw_request(pidff->hid, pidff->reports[PID_SET_PERIODIC],
HID_REQ_SET_REPORT);
}
......@@ -399,8 +399,8 @@ static void pidff_set_condition_report(struct pidff_device *pidff,
effect->u.condition[i].left_saturation);
pidff_set(&pidff->set_condition[PID_DEAD_BAND],
effect->u.condition[i].deadband);
usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_CONDITION],
USB_DIR_OUT);
hid_hw_request(pidff->hid, pidff->reports[PID_SET_CONDITION],
HID_REQ_SET_REPORT);
}
}
......@@ -440,8 +440,8 @@ static void pidff_set_ramp_force_report(struct pidff_device *pidff,
effect->u.ramp.start_level);
pidff_set_signed(&pidff->set_ramp[PID_RAMP_END],
effect->u.ramp.end_level);
usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_RAMP],
USB_DIR_OUT);
hid_hw_request(pidff->hid, pidff->reports[PID_SET_RAMP],
HID_REQ_SET_REPORT);
}
/*
......@@ -465,8 +465,8 @@ static int pidff_request_effect_upload(struct pidff_device *pidff, int efnum)
int j;
pidff->create_new_effect_type->value[0] = efnum;
usbhid_submit_report(pidff->hid, pidff->reports[PID_CREATE_NEW_EFFECT],
USB_DIR_OUT);
hid_hw_request(pidff->hid, pidff->reports[PID_CREATE_NEW_EFFECT],
HID_REQ_SET_REPORT);
hid_dbg(pidff->hid, "create_new_effect sent, type: %d\n", efnum);
pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0] = 0;
......@@ -475,8 +475,8 @@ static int pidff_request_effect_upload(struct pidff_device *pidff, int efnum)
for (j = 0; j < 60; j++) {
hid_dbg(pidff->hid, "pid_block_load requested\n");
usbhid_submit_report(pidff->hid, pidff->reports[PID_BLOCK_LOAD],
USB_DIR_IN);
hid_hw_request(pidff->hid, pidff->reports[PID_BLOCK_LOAD],
HID_REQ_GET_REPORT);
usbhid_wait_io(pidff->hid);
if (pidff->block_load_status->value[0] ==
pidff->status_id[PID_BLOCK_LOAD_SUCCESS]) {
......@@ -513,8 +513,8 @@ static void pidff_playback_pid(struct pidff_device *pidff, int pid_id, int n)
pidff->effect_operation[PID_LOOP_COUNT].value[0] = n;
}
usbhid_submit_report(pidff->hid, pidff->reports[PID_EFFECT_OPERATION],
USB_DIR_OUT);
hid_hw_request(pidff->hid, pidff->reports[PID_EFFECT_OPERATION],
HID_REQ_SET_REPORT);
}
/**
......@@ -535,8 +535,8 @@ static int pidff_playback(struct input_dev *dev, int effect_id, int value)
static void pidff_erase_pid(struct pidff_device *pidff, int pid_id)
{
pidff->block_free[PID_EFFECT_BLOCK_INDEX].value[0] = pid_id;
usbhid_submit_report(pidff->hid, pidff->reports[PID_BLOCK_FREE],
USB_DIR_OUT);
hid_hw_request(pidff->hid, pidff->reports[PID_BLOCK_FREE],
HID_REQ_SET_REPORT);
}
/*
......@@ -718,8 +718,8 @@ static void pidff_set_gain(struct input_dev *dev, u16 gain)
struct pidff_device *pidff = dev->ff->private;
pidff_set(&pidff->device_gain[PID_DEVICE_GAIN_FIELD], gain);
usbhid_submit_report(pidff->hid, pidff->reports[PID_DEVICE_GAIN],
USB_DIR_OUT);
hid_hw_request(pidff->hid, pidff->reports[PID_DEVICE_GAIN],
HID_REQ_SET_REPORT);
}
static void pidff_autocenter(struct pidff_device *pidff, u16 magnitude)
......@@ -744,8 +744,8 @@ static void pidff_autocenter(struct pidff_device *pidff, u16 magnitude)
pidff->set_effect[PID_DIRECTION_ENABLE].value[0] = 1;
pidff->set_effect[PID_START_DELAY].value[0] = 0;
usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT],
USB_DIR_OUT);
hid_hw_request(pidff->hid, pidff->reports[PID_SET_EFFECT],
HID_REQ_SET_REPORT);
}
/*
......@@ -1158,18 +1158,18 @@ static void pidff_reset(struct pidff_device *pidff)
pidff->device_control->value[0] = pidff->control_id[PID_RESET];
/* We reset twice as sometimes hid_wait_io isn't waiting long enough */
usbhid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT);
hid_hw_request(hid, pidff->reports[PID_DEVICE_CONTROL], HID_REQ_SET_REPORT);
usbhid_wait_io(hid);
usbhid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT);
hid_hw_request(hid, pidff->reports[PID_DEVICE_CONTROL], HID_REQ_SET_REPORT);
usbhid_wait_io(hid);
pidff->device_control->value[0] =
pidff->control_id[PID_ENABLE_ACTUATORS];
usbhid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT);
hid_hw_request(hid, pidff->reports[PID_DEVICE_CONTROL], HID_REQ_SET_REPORT);
usbhid_wait_io(hid);
/* pool report is sometimes messed up, refetch it */
usbhid_submit_report(hid, pidff->reports[PID_POOL], USB_DIR_IN);
hid_hw_request(hid, pidff->reports[PID_POOL], HID_REQ_GET_REPORT);
usbhid_wait_io(hid);
if (pidff->pool[PID_SIMULTANEOUS_MAX].value) {
......@@ -1181,8 +1181,8 @@ static void pidff_reset(struct pidff_device *pidff)
break;
}
hid_dbg(pidff->hid, "pid_pool requested again\n");
usbhid_submit_report(hid, pidff->reports[PID_POOL],
USB_DIR_IN);
hid_hw_request(hid, pidff->reports[PID_POOL],
HID_REQ_GET_REPORT);
usbhid_wait_io(hid);
}
}
......@@ -1269,8 +1269,8 @@ int hid_pidff_init(struct hid_device *hid)
if (test_bit(FF_GAIN, dev->ffbit)) {
pidff_set(&pidff->device_gain[PID_DEVICE_GAIN_FIELD], 0xffff);
usbhid_submit_report(hid, pidff->reports[PID_DEVICE_GAIN],
USB_DIR_OUT);
hid_hw_request(hid, pidff->reports[PID_DEVICE_GAIN],
HID_REQ_SET_REPORT);
}
error = pidff_check_autocenter(pidff, dev);
......
......@@ -705,7 +705,7 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
if (report == NULL)
break;
usbhid_submit_report(hid, report, USB_DIR_IN);
hid_hw_request(hid, report, HID_REQ_GET_REPORT);
usbhid_wait_io(hid);
r = 0;
......@@ -724,7 +724,7 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
if (report == NULL)
break;
usbhid_submit_report(hid, report, USB_DIR_OUT);
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
usbhid_wait_io(hid);
r = 0;
......
......@@ -38,8 +38,6 @@ int usbhid_wait_io(struct hid_device* hid);
void usbhid_close(struct hid_device *hid);
int usbhid_open(struct hid_device *hid);
void usbhid_init_reports(struct hid_device *hid);
void usbhid_submit_report
(struct hid_device *hid, struct hid_report *report, unsigned char dir);
int usbhid_get_power(struct hid_device *hid);
void usbhid_put_power(struct hid_device *hid);
struct usb_interface *usbhid_find_interface(int minor);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment