Commit d894b89b authored by Greg Ungerer's avatar Greg Ungerer

m68knommu: factor some common ColdFire cpu reset code

A number of the early ColdFire cores use the same code to reset the CPU.
Currently that is duplicated in each of the sub-arch files. Pull out this
common code and use a single copy of it for all CPU types that use it.
Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
parent 440f6ffc
......@@ -19,17 +19,6 @@
/***************************************************************************/
void m5206_cpu_reset(void)
{
local_irq_disable();
/* Set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
#if defined(CONFIG_NETtel)
......@@ -38,7 +27,6 @@ void __init config_BSP(char *commandp, int size)
commandp[size-1] = 0;
#endif /* CONFIG_NETtel */
mach_reset = m5206_cpu_reset;
mach_sched_init = hw_timer_init;
/* Only support the external interrupts on their primary level */
......
......@@ -83,21 +83,10 @@ static void __init m5249_smc91x_init(void)
/***************************************************************************/
void m5249_cpu_reset(void)
{
local_irq_disable();
/* Set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mach_reset = m5249_cpu_reset;
mach_sched_init = hw_timer_init;
#ifdef CONFIG_M5249C3
m5249_smc91x_init();
#endif
......
......@@ -28,17 +28,6 @@ unsigned char ledbank = 0xff;
/***************************************************************************/
void m5307_cpu_reset(void)
{
local_irq_disable();
/* Set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
#if defined(CONFIG_NETtel) || \
......@@ -48,7 +37,6 @@ void __init config_BSP(char *commandp, int size)
commandp[size-1] = 0;
#endif
mach_reset = m5307_cpu_reset;
mach_sched_init = hw_timer_init;
/* Only support the external interrupts on their primary level */
......
......@@ -19,20 +19,8 @@
/***************************************************************************/
void m5407_cpu_reset(void)
{
local_irq_disable();
/* set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mach_reset = m5407_cpu_reset;
mach_sched_init = hw_timer_init;
/* Only support the external interrupts on their primary level */
......
......@@ -15,17 +15,17 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o dma.o entry.o vectors.o
obj-$(CONFIG_M5206) += timers.o intc.o
obj-$(CONFIG_M5206e) += timers.o intc.o
obj-$(CONFIG_M5206) += timers.o intc.o reset.o
obj-$(CONFIG_M5206e) += timers.o intc.o reset.o
obj-$(CONFIG_M520x) += pit.o intc-simr.o
obj-$(CONFIG_M523x) += pit.o dma_timer.o intc-2.o
obj-$(CONFIG_M5249) += timers.o intc.o
obj-$(CONFIG_M5249) += timers.o intc.o reset.o
obj-$(CONFIG_M527x) += pit.o intc-2.o
obj-$(CONFIG_M5272) += timers.o
obj-$(CONFIG_M528x) += pit.o intc-2.o
obj-$(CONFIG_M5307) += timers.o intc.o
obj-$(CONFIG_M5307) += timers.o intc.o reset.o
obj-$(CONFIG_M532x) += timers.o intc-simr.o
obj-$(CONFIG_M5407) += timers.o intc.o
obj-$(CONFIG_M5407) += timers.o intc.o reset.o
obj-$(CONFIG_M54xx) += sltimers.o intc-2.o
obj-y += pinmux.o gpio.o
......
/*
* reset.c -- common ColdFire SoC reset support
*
* (C) Copyright 2012, Greg Ungerer <gerg@uclinux.org>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
void mcf_cpu_reset(void)
{
local_irq_disable();
/* Set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
static int __init mcf_setup_reset(void)
{
mach_reset = mcf_cpu_reset;
return 0;
}
arch_initcall(mcf_setup_reset);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment