pinctrl: sh-pfc: Tidy up driver description title

Sort each driver by description title in alphabetical order.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h7ssy4qy.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

drivers/pinctrl/sh-pfc/Kconfig

@@ -55,38 +55,6 @@ config PINCTRL_SH_PFC
 	help
 	  This enables pin control drivers for Renesas SuperH and ARM platforms
 
-config PINCTRL_RZA1
-	bool "pin control support for RZ/A1"
-	depends on OF
-	depends on ARCH_R7S72100 || COMPILE_TEST
-	select GPIOLIB
-	select GENERIC_PINCTRL_GROUPS
-	select GENERIC_PINMUX_FUNCTIONS
-	select GENERIC_PINCONF
-	help
-	  This selects pinctrl driver for Renesas RZ/A1 platforms.
-
-config PINCTRL_RZA2
-	bool "pin control support for RZ/A2"
-	depends on OF
-	depends on ARCH_R7S9210 || COMPILE_TEST
-	select GPIOLIB
-	select GENERIC_PINCTRL_GROUPS
-	select GENERIC_PINMUX_FUNCTIONS
-	select GENERIC_PINCONF
-	help
-	  This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms.
-
-config PINCTRL_RZN1
-	bool "pin control support for RZ/N1"
-	depends on OF
-	depends on ARCH_RZN1 || COMPILE_TEST
-	select GENERIC_PINCTRL_GROUPS
-	select GENERIC_PINMUX_FUNCTIONS
-	select GENERIC_PINCONF
-	help
-	  This selects pinctrl driver for Renesas RZ/N1 devices.
-
 config PINCTRL_SH_PFC_GPIO
 	select GPIOLIB
 	bool
@@ -102,43 +70,14 @@ config PINCTRL_SH_FUNC_GPIO
 config PINCTRL_PFC_EMEV2
 	bool "pin control support for Emma Mobile EV2" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A73A4
-	bool "pin control support for R-Mobile APE6" if COMPILE_TEST
-	select PINCTRL_SH_PFC_GPIO
-
-config PINCTRL_PFC_R8A7740
-	bool "pin control support for R-Mobile A1" if COMPILE_TEST
-	select PINCTRL_SH_PFC_GPIO
-
-config PINCTRL_PFC_R8A7742
-	bool "pin control support for RZ/G1H" if COMPILE_TEST
-
-config PINCTRL_PFC_R8A7743
-	bool "pin control support for RZ/G1M" if COMPILE_TEST
-
-config PINCTRL_PFC_R8A7744
-	bool "pin control support for RZ/G1N" if COMPILE_TEST
-
-config PINCTRL_PFC_R8A7745
-	bool "pin control support for RZ/G1E" if COMPILE_TEST
-
-config PINCTRL_PFC_R8A77470
-	bool "pin control support for RZ/G1C" if COMPILE_TEST
-
-config PINCTRL_PFC_R8A774A1
-	bool "pin control support for RZ/G2M" if COMPILE_TEST
-
-config PINCTRL_PFC_R8A774B1
-	bool "pin control support for RZ/G2N" if COMPILE_TEST
-
-config PINCTRL_PFC_R8A774C0
-	bool "pin control support for RZ/G2E" if COMPILE_TEST
+config PINCTRL_PFC_R8A77995
+	bool "pin control support for R-Car D3" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A774E1
-	bool "pin control support for RZ/G2H" if COMPILE_TEST
+config PINCTRL_PFC_R8A7794
+	bool "pin control support for R-Car E2" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A7778
-	bool "pin control support for R-Car M1A" if COMPILE_TEST
+config PINCTRL_PFC_R8A77990
+	bool "pin control support for R-Car E3" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7779
 	bool "pin control support for R-Car H1" if COMPILE_TEST
@@ -146,23 +85,23 @@ config PINCTRL_PFC_R8A7779
 config PINCTRL_PFC_R8A7790
 	bool "pin control support for R-Car H2" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A7791
-	bool "pin control support for R-Car M2-W" if COMPILE_TEST
+config PINCTRL_PFC_R8A77950
+	bool "pin control support for R-Car H3 ES1.x" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A7792
-	bool "pin control support for R-Car V2H" if COMPILE_TEST
+config PINCTRL_PFC_R8A77951
+	bool "pin control support for R-Car H3 ES2.0+" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A7778
+	bool "pin control support for R-Car M1A" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7793
 	bool "pin control support for R-Car M2-N" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A7794
-	bool "pin control support for R-Car E2" if COMPILE_TEST
-
-config PINCTRL_PFC_R8A77950
-	bool "pin control support for R-Car H3 ES1.x" if COMPILE_TEST
+config PINCTRL_PFC_R8A7791
+	bool "pin control support for R-Car M2-W" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A77951
-	bool "pin control support for R-Car H3 ES2.0+" if COMPILE_TEST
+config PINCTRL_PFC_R8A77965
+	bool "pin control support for R-Car M3-N" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77960
 	bool "pin control support for R-Car M3-W" if COMPILE_TEST
@@ -170,20 +109,81 @@ config PINCTRL_PFC_R8A77960
 config PINCTRL_PFC_R8A77961
 	bool "pin control support for R-Car M3-W+" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A77965
-	bool "pin control support for R-Car M3-N" if COMPILE_TEST
+config PINCTRL_PFC_R8A7792
+	bool "pin control support for R-Car V2H" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A77980
+	bool "pin control support for R-Car V3H" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77970
 	bool "pin control support for R-Car V3M" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A77980
-	bool "pin control support for R-Car V3H" if COMPILE_TEST
+config PINCTRL_PFC_R8A7740
+	bool "pin control support for R-Mobile A1" if COMPILE_TEST
+	select PINCTRL_SH_PFC_GPIO
 
-config PINCTRL_PFC_R8A77990
-	bool "pin control support for R-Car E3" if COMPILE_TEST
+config PINCTRL_PFC_R8A73A4
+	bool "pin control support for R-Mobile APE6" if COMPILE_TEST
+	select PINCTRL_SH_PFC_GPIO
 
-config PINCTRL_PFC_R8A77995
-	bool "pin control support for R-Car D3" if COMPILE_TEST
+config PINCTRL_RZA1
+	bool "pin control support for RZ/A1"
+	depends on OF
+	depends on ARCH_R7S72100 || COMPILE_TEST
+	select GPIOLIB
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	select GENERIC_PINCONF
+	help
+	  This selects pinctrl driver for Renesas RZ/A1 platforms.
+
+config PINCTRL_RZA2
+	bool "pin control support for RZ/A2"
+	depends on OF
+	depends on ARCH_R7S9210 || COMPILE_TEST
+	select GPIOLIB
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	select GENERIC_PINCONF
+	help
+	  This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms.
+
+config PINCTRL_PFC_R8A77470
+	bool "pin control support for RZ/G1C" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A7745
+	bool "pin control support for RZ/G1E" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A7742
+	bool "pin control support for RZ/G1H" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A7743
+	bool "pin control support for RZ/G1M" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A7744
+	bool "pin control support for RZ/G1N" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A774C0
+	bool "pin control support for RZ/G2E" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A774E1
+	bool "pin control support for RZ/G2H" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A774A1
+	bool "pin control support for RZ/G2M" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A774B1
+	bool "pin control support for RZ/G2N" if COMPILE_TEST
+
+config PINCTRL_RZN1
+	bool "pin control support for RZ/N1"
+	depends on OF
+	depends on ARCH_RZN1 || COMPILE_TEST
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	select GENERIC_PINCONF
+	help
+	  This selects pinctrl driver for Renesas RZ/N1 devices.
 
 config PINCTRL_PFC_SH7203
 	bool "pin control support for SH7203" if COMPILE_TEST
@@ -197,11 +197,6 @@ config PINCTRL_PFC_SH7269
 	bool "pin control support for SH7269" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
-config PINCTRL_PFC_SH73A0
-	bool "pin control support for SH-Mobile AG5" if COMPILE_TEST
-	select PINCTRL_SH_PFC_GPIO
-	select REGULATOR
-
 config PINCTRL_PFC_SH7720
 	bool "pin control support for SH7720" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
@@ -210,14 +205,6 @@ config PINCTRL_PFC_SH7722
 	bool "pin control support for SH7722" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
-config PINCTRL_PFC_SH7723
-	bool "pin control support for SH-Mobile R2" if COMPILE_TEST
-	select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7724
-	bool "pin control support for SH-Mobile R2R" if COMPILE_TEST
-	select PINCTRL_SH_FUNC_GPIO
-
 config PINCTRL_PFC_SH7734
 	bool "pin control support for SH7734" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
@@ -234,6 +221,19 @@ config PINCTRL_PFC_SH7786
 	bool "pin control support for SH7786" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
+config PINCTRL_PFC_SH73A0
+	bool "pin control support for SH-Mobile AG5" if COMPILE_TEST
+	select PINCTRL_SH_PFC_GPIO
+	select REGULATOR
+
+config PINCTRL_PFC_SH7723
+	bool "pin control support for SH-Mobile R2" if COMPILE_TEST
+	select PINCTRL_SH_FUNC_GPIO
+
+config PINCTRL_PFC_SH7724
+	bool "pin control support for SH-Mobile R2R" if COMPILE_TEST
+	select PINCTRL_SH_FUNC_GPIO
+
 config PINCTRL_PFC_SHX3
 	bool "pin control support for SH-X3" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO