Commit d8bbeb39 authored by Joao Pinto's avatar Joao Pinto Committed by Bjorn Helgaas

PCI: designware: Wait for iATU enable

Add a loop with timeout to make sure the iATU is really enabled before
subsequent config and I/O accesses.

[bhelgaas: split to separate patch, use dev_err() instead of dev_dbg()]
Signed-off-by: default avatarJoao Pinto <jpinto@synopsys.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
parent c388de1c
...@@ -31,7 +31,12 @@ ...@@ -31,7 +31,12 @@
#define LINK_WAIT_USLEEP_MIN 90000 #define LINK_WAIT_USLEEP_MIN 90000
#define LINK_WAIT_USLEEP_MAX 100000 #define LINK_WAIT_USLEEP_MAX 100000
/* Synopsis specific PCIE configuration registers */ /* Parameters for the waiting for iATU enabled routine */
#define LINK_WAIT_MAX_IATU_RETRIES 5
#define LINK_WAIT_IATU_MIN 9000
#define LINK_WAIT_IATU_MAX 10000
/* Synopsys-specific PCIe configuration registers */
#define PCIE_PORT_LINK_CONTROL 0x710 #define PCIE_PORT_LINK_CONTROL 0x710
#define PORT_LINK_MODE_MASK (0x3f << 16) #define PORT_LINK_MODE_MASK (0x3f << 16)
#define PORT_LINK_MODE_1_LANES (0x1 << 16) #define PORT_LINK_MODE_1_LANES (0x1 << 16)
...@@ -157,7 +162,7 @@ static int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size, ...@@ -157,7 +162,7 @@ static int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size,
static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index, static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index,
int type, u64 cpu_addr, u64 pci_addr, u32 size) int type, u64 cpu_addr, u64 pci_addr, u32 size)
{ {
u32 val; u32 retries, val;
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | index, dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | index,
PCIE_ATU_VIEWPORT); PCIE_ATU_VIEWPORT);
...@@ -174,7 +179,14 @@ static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index, ...@@ -174,7 +179,14 @@ static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index,
* Make sure ATU enable takes effect before any subsequent config * Make sure ATU enable takes effect before any subsequent config
* and I/O accesses. * and I/O accesses.
*/ */
val = dw_pcie_readl_rc(pp, PCIE_ATU_CR2); for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
val = dw_pcie_readl_rc(pp, PCIE_ATU_CR2);
if (val == PCIE_ATU_ENABLE)
return;
usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
}
dev_err(pp->dev, "iATU is not being enabled\n");
} }
static struct irq_chip dw_msi_irq_chip = { static struct irq_chip dw_msi_irq_chip = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment