scsi: aic7xxx: aic79xx: Drop internal SCSI message definition

Use the standard SCSI message definitions instead of the driver-internal
ones.

Link: https://lore.kernel.org/r/20210113090500.129644-20-hare@suse.deReviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/aic7xxx/aic79xx_osm.c

@@ -1602,10 +1602,10 @@ ahd_linux_run_command(struct ahd_softc *ahd, struct ahd_linux_device *dev,
 	if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) {
 		if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH
 		 && (dev->flags & AHD_DEV_Q_TAGGED) != 0) {
-			hscb->control |= MSG_ORDERED_TASK;
+			hscb->control |= ORDERED_QUEUE_TAG;
 			dev->commands_since_idle_or_otag = 0;
 		} else {
-			hscb->control |= MSG_SIMPLE_TASK;
+			hscb->control |= SIMPLE_QUEUE_TAG;
 		}
 	}
 

drivers/scsi/aic7xxx/aic7xxx_osm.c

+
 /*
  * Adaptec AIC7xxx device driver for Linux.
  *
@@ -1480,10 +1481,10 @@ ahc_linux_run_command(struct ahc_softc *ahc, struct ahc_linux_device *dev,
 	if ((dev->flags & (AHC_DEV_Q_TAGGED|AHC_DEV_Q_BASIC)) != 0) {
 		if (dev->commands_since_idle_or_otag == AHC_OTAG_THRESH
 				&& (dev->flags & AHC_DEV_Q_TAGGED) != 0) {
-			hscb->control |= MSG_ORDERED_TASK;
+			hscb->control |= ORDERED_QUEUE_TAG;
 			dev->commands_since_idle_or_otag = 0;
 		} else {
-			hscb->control |= MSG_SIMPLE_TASK;
+			hscb->control |= SIMPLE_QUEUE_TAG;
 		}
 	}
 

drivers/scsi/aic7xxx/scsi_message.h

@@ -3,44 +3,6 @@
  * $FreeBSD: src/sys/cam/scsi/scsi_message.h,v 1.2 2000/05/01 20:21:29 peter Exp $
  */
 
-/* Messages (1 byte) */		     /* I/T (M)andatory or (O)ptional */
-#define MSG_CMDCOMPLETE		0x00 /* M/M */
-#define MSG_TASK_COMPLETE	0x00 /* M/M */ /* SPI3 Terminology */
-#define MSG_EXTENDED		0x01 /* O/O */
-#define MSG_SAVEDATAPOINTER	0x02 /* O/O */
-#define MSG_RESTOREPOINTERS	0x03 /* O/O */
-#define MSG_DISCONNECT		0x04 /* O/O */
-#define MSG_INITIATOR_DET_ERR	0x05 /* M/M */
-#define MSG_ABORT		0x06 /* O/M */
-#define MSG_ABORT_TASK_SET	0x06 /* O/M */ /* SPI3 Terminology */
-#define MSG_MESSAGE_REJECT	0x07 /* M/M */
-#define MSG_NOOP		0x08 /* M/M */
-#define MSG_PARITY_ERROR	0x09 /* M/M */
-#define MSG_LINK_CMD_COMPLETE	0x0a /* O/O */
-#define MSG_LINK_CMD_COMPLETEF	0x0b /* O/O */
-#define MSG_BUS_DEV_RESET	0x0c /* O/M */
-#define MSG_TARGET_RESET	0x0c /* O/M */ /* SPI3 Terminology */
-#define MSG_ABORT_TAG		0x0d /* O/O */
-#define MSG_ABORT_TASK		0x0d /* O/O */ /* SPI3 Terminology */
-#define MSG_CLEAR_QUEUE		0x0e /* O/O */
-#define MSG_CLEAR_TASK_SET	0x0e /* O/O */ /* SPI3 Terminology */
-#define MSG_INIT_RECOVERY	0x0f /* O/O */ /* Deprecated in SPI3 */
-#define MSG_REL_RECOVERY	0x10 /* O/O */ /* Deprecated in SPI3 */
-#define MSG_TERM_IO_PROC	0x11 /* O/O */ /* Deprecated in SPI3 */
-#define MSG_CLEAR_ACA		0x16 /* O/O */ /* SPI3 */
-#define MSG_LOGICAL_UNIT_RESET	0x17 /* O/O */ /* SPI3 */
-#define MSG_QAS_REQUEST		0x55 /* O/O */ /* SPI3 */
-
-/* Messages (2 byte) */
-#define MSG_SIMPLE_Q_TAG	0x20 /* O/O */
-#define MSG_SIMPLE_TASK		0x20 /* O/O */ /* SPI3 Terminology */
-#define MSG_HEAD_OF_Q_TAG	0x21 /* O/O */
-#define MSG_HEAD_OF_QUEUE_TASK	0x21 /* O/O */ /* SPI3 Terminology */
-#define MSG_ORDERED_Q_TAG	0x22 /* O/O */
-#define MSG_ORDERED_TASK	0x22 /* O/O */ /* SPI3 Terminology */
-#define MSG_IGN_WIDE_RESIDUE	0x23 /* O/O */
-#define MSG_ACA_TASK		0x24 /* 0/0 */ /* SPI3 */
-
 /* Identify message */		     /* M/M */	
 #define MSG_IDENTIFYFLAG	0x80 
 #define MSG_IDENTIFY_DISCFLAG	0x40 
@@ -49,16 +11,13 @@
 #define MSG_IDENTIFY_LUNMASK	0x3F 
 
 /* Extended messages (opcode and length) */
-#define MSG_EXT_SDTR		0x01
 #define MSG_EXT_SDTR_LEN	0x03
 
-#define MSG_EXT_WDTR		0x03
 #define MSG_EXT_WDTR_LEN	0x02
 #define MSG_EXT_WDTR_BUS_8_BIT	0x00
 #define MSG_EXT_WDTR_BUS_16_BIT	0x01
 #define MSG_EXT_WDTR_BUS_32_BIT	0x02 /* Deprecated in SPI3 */
 
-#define MSG_EXT_PPR		0x04 /* SPI3 */
 #define MSG_EXT_PPR_LEN		0x06
 #define	MSG_EXT_PPR_PCOMP_EN	0x80
 #define	MSG_EXT_PPR_RTI		0x40

include/scsi/scsi.h

@@ -116,6 +116,7 @@ static inline int scsi_is_wlun(u64 lun)
 #define CLEAR_TASK_SET      0x0e
 #define INITIATE_RECOVERY   0x0f            /* SCSI-II only */
 #define RELEASE_RECOVERY    0x10            /* SCSI-II only */
+#define TERMINATE_IO_PROC   0x11            /* SCSI-II only */
 #define CLEAR_ACA           0x16
 #define LOGICAL_UNIT_RESET  0x17
 #define SIMPLE_QUEUE_TAG    0x20