Merge branch 'common/mmcif' into rmobile/mmcif

arch/sh/include/mach-common/mach/romimage.h

@@ -4,7 +4,7 @@
 
 #else /* __ASSEMBLY__ */
 
-extern inline void mmcif_update_progress(int nr)
+static inline void mmcif_update_progress(int nr)
 {
 }
 

arch/sh/include/mach-ecovec24/mach/romimage.h

@@ -35,7 +35,7 @@
 #define HIZCRA		0xa4050158
 #define PGDR		0xa405012c
 
-extern inline void mmcif_update_progress(int nr)
+static inline void mmcif_update_progress(int nr)
 {
 	/* disable Hi-Z for LED pins */
 	__raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);

arch/sh/include/mach-kfr2r09/mach/romimage.h

@@ -23,7 +23,7 @@
 
 #else /* __ASSEMBLY__ */
 
-extern inline void mmcif_update_progress(int nr)
+static inline void mmcif_update_progress(int nr)
 {
 }
 

include/linux/mmc/sh_mmcif.h

@@ -77,6 +77,9 @@ struct sh_mmcif_plat_data {
 #define CLK_ENABLE		(1 << 24) /* 1: output mmc clock */
 #define CLK_CLEAR		((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
 #define CLK_SUP_PCLK		((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
+#define CLKDIV_4		(1<<16) /* mmc clock frequency.
+					 * n: bus clock/(2^(n+1)) */
+#define CLKDIV_256		(7<<16) /* mmc clock frequency. (see above) */
 #define SRSPTO_256		((1 << 13) | (0 << 12)) /* resp timeout */
 #define SRBSYTO_29		((1 << 11) | (1 << 10) |	\
 				 (1 << 9) | (1 << 8)) /* resp busy timeout */
@@ -87,7 +90,7 @@ struct sh_mmcif_plat_data {
 
 /* CE_VERSION */
 #define SOFT_RST_ON		(1 << 31)
-#define SOFT_RST_OFF		~SOFT_RST_ON
+#define SOFT_RST_OFF		0
 
 static inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
 {
@@ -175,12 +178,9 @@ static inline int sh_mmcif_boot_do_read(void __iomem *base,
 
 static inline void sh_mmcif_boot_init(void __iomem *base)
 {
-	unsigned long tmp;
-
 	/* reset */
-	tmp = sh_mmcif_readl(base, MMCIF_CE_VERSION);
-	sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | SOFT_RST_ON);
-	sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & SOFT_RST_OFF);
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_ON);
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_OFF);
 
 	/* byte swap */
 	sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP);
@@ -188,14 +188,10 @@ static inline void sh_mmcif_boot_init(void __iomem *base)
 	/* Set block size in MMCIF hardware */
 	sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS);
 
-	/* Enable the clock, set it to Bus clock/256 (about 325Khz).
-	 * It is unclear where 0x70000 comes from or if it is even needed.
-	 * It is there for byte-compatibility with code that is known to
-	 * work.
-	 */
+	/* Enable the clock, set it to Bus clock/256 (about 325Khz). */
 	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
-			CLK_ENABLE | SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 |
-			SCCSTO_29 | 0x70000);
+			CLK_ENABLE | CLKDIV_256 | SRSPTO_256 |
+			SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
 
 	/* CMD0 */
 	sh_mmcif_boot_cmd(base, 0x00000040, 0);
@@ -220,7 +216,9 @@ static inline void sh_mmcif_boot_slurp(void __iomem *base,
 	unsigned long tmp;
 
 	/* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */
-	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01012fff);
+	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
+			CLK_ENABLE | CLKDIV_4 | SRSPTO_256 |
+			SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
 
 	/* CMD9 - Get CSD */
 	sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000);