Commit d913971e authored by Srinivas Pandruvada's avatar Srinivas Pandruvada Committed by Jonathan Cameron

iio: ak8975: Added ACPI enumeration

Added capability so that this device can be enumerated via ACPI.
Signed-off-by: default avatarSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 6027c077
...@@ -31,6 +31,7 @@ ...@@ -31,6 +31,7 @@
#include <linux/bitops.h> #include <linux/bitops.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/of_gpio.h> #include <linux/of_gpio.h>
#include <linux/acpi.h>
#include <linux/iio/iio.h> #include <linux/iio/iio.h>
#include <linux/iio/sysfs.h> #include <linux/iio/sysfs.h>
...@@ -475,6 +476,27 @@ static const struct iio_info ak8975_info = { ...@@ -475,6 +476,27 @@ static const struct iio_info ak8975_info = {
.driver_module = THIS_MODULE, .driver_module = THIS_MODULE,
}; };
static const struct acpi_device_id ak_acpi_match[] = {
{"AK8975", AK8975},
{"AK8963", AK8963},
{"INVN6500", AK8963},
{ },
};
MODULE_DEVICE_TABLE(acpi, ak_acpi_match);
static char *ak8975_match_acpi_device(struct device *dev,
enum asahi_compass_chipset *chipset)
{
const struct acpi_device_id *id;
id = acpi_match_device(dev->driver->acpi_match_table, dev);
if (!id)
return NULL;
*chipset = (int)id->driver_data;
return (char *)dev_name(dev);
}
static int ak8975_probe(struct i2c_client *client, static int ak8975_probe(struct i2c_client *client,
const struct i2c_device_id *id) const struct i2c_device_id *id)
{ {
...@@ -482,6 +504,7 @@ static int ak8975_probe(struct i2c_client *client, ...@@ -482,6 +504,7 @@ static int ak8975_probe(struct i2c_client *client,
struct iio_dev *indio_dev; struct iio_dev *indio_dev;
int eoc_gpio; int eoc_gpio;
int err; int err;
char *name = NULL;
/* Grab and set up the supplied GPIO. */ /* Grab and set up the supplied GPIO. */
if (client->dev.platform_data) if (client->dev.platform_data)
...@@ -519,8 +542,18 @@ static int ak8975_probe(struct i2c_client *client, ...@@ -519,8 +542,18 @@ static int ak8975_probe(struct i2c_client *client,
data->eoc_gpio = eoc_gpio; data->eoc_gpio = eoc_gpio;
data->eoc_irq = 0; data->eoc_irq = 0;
data->chipset = (enum asahi_compass_chipset)(id->driver_data); /* id will be NULL when enumerated via ACPI */
dev_dbg(&client->dev, "Asahi compass chip %s\n", id->name); if (id) {
data->chipset =
(enum asahi_compass_chipset)(id->driver_data);
name = (char *) id->name;
} else if (ACPI_HANDLE(&client->dev))
name = ak8975_match_acpi_device(&client->dev, &data->chipset);
else {
err = -ENOSYS;
goto exit_free_iio;
}
dev_dbg(&client->dev, "Asahi compass chip %s\n", name);
/* Perform some basic start-of-day setup of the device. */ /* Perform some basic start-of-day setup of the device. */
err = ak8975_setup(client); err = ak8975_setup(client);
...@@ -538,7 +571,7 @@ static int ak8975_probe(struct i2c_client *client, ...@@ -538,7 +571,7 @@ static int ak8975_probe(struct i2c_client *client,
indio_dev->info = &ak8975_info; indio_dev->info = &ak8975_info;
indio_dev->name = id->name; indio_dev->name = id->name;
indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->name = name;
err = iio_device_register(indio_dev); err = iio_device_register(indio_dev);
if (err < 0) if (err < 0)
goto exit_free_iio; goto exit_free_iio;
...@@ -593,6 +626,7 @@ static struct i2c_driver ak8975_driver = { ...@@ -593,6 +626,7 @@ static struct i2c_driver ak8975_driver = {
.driver = { .driver = {
.name = "ak8975", .name = "ak8975",
.of_match_table = ak8975_of_match, .of_match_table = ak8975_of_match,
.acpi_match_table = ACPI_PTR(ak_acpi_match),
}, },
.probe = ak8975_probe, .probe = ak8975_probe,
.remove = ak8975_remove, .remove = ak8975_remove,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment