Commit d94a0147 authored by David S. Miller's avatar David S. Miller

Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next

Marc Kleine-Budde says:

====================
this pull-request for net-next consists of a series by Alexander
Shiyan, he cleans up the mcp251x driver. As the first patch touches
arch/arm/mach-pxa, it's acked by Haojian Zhuang.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 327dfd88 b1ef05a5
......@@ -73,9 +73,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
static struct mcp251x_platform_data mcp251x_info = {
.oscillator_frequency = 16E6,
.board_specific_setup = NULL,
.power_enable = NULL,
.transceiver_enable = NULL
};
static struct spi_board_info mcp251x_board_info[] = {
......
......@@ -29,6 +29,8 @@
#include <linux/i2c/pca953x.h>
#include <linux/apm-emulation.h>
#include <linux/can/platform/mcp251x.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/suspend.h>
......@@ -391,33 +393,34 @@ static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
};
/* CAN bus on SPI */
static int zeus_mcp2515_setup(struct spi_device *sdev)
{
int err;
err = gpio_request(ZEUS_CAN_SHDN_GPIO, "CAN shutdown");
if (err)
return err;
static struct regulator_consumer_supply can_regulator_consumer =
REGULATOR_SUPPLY("vdd", "spi3.0");
err = gpio_direction_output(ZEUS_CAN_SHDN_GPIO, 1);
if (err) {
gpio_free(ZEUS_CAN_SHDN_GPIO);
return err;
}
static struct regulator_init_data can_regulator_init_data = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.consumer_supplies = &can_regulator_consumer,
.num_consumer_supplies = 1,
};
return 0;
}
static struct fixed_voltage_config can_regulator_pdata = {
.supply_name = "CAN_SHDN",
.microvolts = 3300000,
.gpio = ZEUS_CAN_SHDN_GPIO,
.init_data = &can_regulator_init_data,
};
static int zeus_mcp2515_transceiver_enable(int enable)
{
gpio_set_value(ZEUS_CAN_SHDN_GPIO, !enable);
return 0;
}
static struct platform_device can_regulator_device = {
.name = "reg-fixed-volage",
.id = -1,
.dev = {
.platform_data = &can_regulator_pdata,
},
};
static struct mcp251x_platform_data zeus_mcp2515_pdata = {
.oscillator_frequency = 16*1000*1000,
.board_specific_setup = zeus_mcp2515_setup,
.power_enable = zeus_mcp2515_transceiver_enable,
};
static struct spi_board_info zeus_spi_board_info[] = {
......@@ -516,6 +519,7 @@ static struct platform_device *zeus_devices[] __initdata = {
&zeus_leds_device,
&zeus_pcmcia_device,
&zeus_max6369_device,
&can_regulator_device,
};
/* AC'97 */
......
......@@ -37,9 +37,6 @@
*
* static struct mcp251x_platform_data mcp251x_info = {
* .oscillator_frequency = 8000000,
* .board_specific_setup = &mcp251x_setup,
* .power_enable = mcp251x_power_enable,
* .transceiver_enable = NULL,
* };
*
* static struct spi_board_info spi_board_info[] = {
......@@ -76,6 +73,7 @@
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/uaccess.h>
#include <linux/regulator/consumer.h>
/* SPI interface instruction set */
#define INSTRUCTION_WRITE 0x02
......@@ -264,6 +262,8 @@ struct mcp251x_priv {
#define AFTER_SUSPEND_POWER 4
#define AFTER_SUSPEND_RESTART 8
int restart_tx;
struct regulator *power;
struct regulator *transceiver;
};
#define MCP251X_IS(_model) \
......@@ -667,16 +667,25 @@ static int mcp251x_hw_probe(struct spi_device *spi)
return (st1 == 0x80 && st2 == 0x07) ? 1 : 0;
}
static int mcp251x_power_enable(struct regulator *reg, int enable)
{
if (IS_ERR(reg))
return 0;
if (enable)
return regulator_enable(reg);
else
return regulator_disable(reg);
}
static void mcp251x_open_clean(struct net_device *net)
{
struct mcp251x_priv *priv = netdev_priv(net);
struct spi_device *spi = priv->spi;
struct mcp251x_platform_data *pdata = spi->dev.platform_data;
free_irq(spi->irq, priv);
mcp251x_hw_sleep(spi);
if (pdata->transceiver_enable)
pdata->transceiver_enable(0);
mcp251x_power_enable(priv->transceiver, 0);
close_candev(net);
}
......@@ -684,7 +693,6 @@ static int mcp251x_stop(struct net_device *net)
{
struct mcp251x_priv *priv = netdev_priv(net);
struct spi_device *spi = priv->spi;
struct mcp251x_platform_data *pdata = spi->dev.platform_data;
close_candev(net);
......@@ -704,8 +712,7 @@ static int mcp251x_stop(struct net_device *net)
mcp251x_hw_sleep(spi);
if (pdata->transceiver_enable)
pdata->transceiver_enable(0);
mcp251x_power_enable(priv->transceiver, 0);
priv->can.state = CAN_STATE_STOPPED;
......@@ -928,8 +935,7 @@ static int mcp251x_open(struct net_device *net)
{
struct mcp251x_priv *priv = netdev_priv(net);
struct spi_device *spi = priv->spi;
struct mcp251x_platform_data *pdata = spi->dev.platform_data;
unsigned long flags;
unsigned long flags = IRQF_ONESHOT | IRQF_TRIGGER_FALLING;
int ret;
ret = open_candev(net);
......@@ -939,25 +945,17 @@ static int mcp251x_open(struct net_device *net)
}
mutex_lock(&priv->mcp_lock);
if (pdata->transceiver_enable)
pdata->transceiver_enable(1);
mcp251x_power_enable(priv->transceiver, 1);
priv->force_quit = 0;
priv->tx_skb = NULL;
priv->tx_len = 0;
flags = IRQF_ONESHOT;
if (pdata->irq_flags)
flags |= pdata->irq_flags;
else
flags |= IRQF_TRIGGER_FALLING;
ret = request_threaded_irq(spi->irq, NULL, mcp251x_can_ist,
flags, DEVICE_NAME, priv);
if (ret) {
dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq);
if (pdata->transceiver_enable)
pdata->transceiver_enable(0);
mcp251x_power_enable(priv->transceiver, 0);
close_candev(net);
goto open_unlock;
}
......@@ -1026,6 +1024,19 @@ static int mcp251x_can_probe(struct spi_device *spi)
CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY;
priv->model = spi_get_device_id(spi)->driver_data;
priv->net = net;
priv->power = devm_regulator_get(&spi->dev, "vdd");
priv->transceiver = devm_regulator_get(&spi->dev, "xceiver");
if ((PTR_ERR(priv->power) == -EPROBE_DEFER) ||
(PTR_ERR(priv->transceiver) == -EPROBE_DEFER)) {
ret = -EPROBE_DEFER;
goto error_power;
}
ret = mcp251x_power_enable(priv->power, 1);
if (ret)
goto error_power;
spi_set_drvdata(spi, priv);
priv->spi = spi;
......@@ -1068,30 +1079,24 @@ static int mcp251x_can_probe(struct spi_device *spi)
}
}
if (pdata->power_enable)
pdata->power_enable(1);
/* Call out to platform specific setup */
if (pdata->board_specific_setup)
pdata->board_specific_setup(spi);
SET_NETDEV_DEV(net, &spi->dev);
/* Configure the SPI bus */
spi->mode = SPI_MODE_0;
spi->mode = spi->mode ? : SPI_MODE_0;
if (mcp251x_is_2510(spi))
spi->max_speed_hz = spi->max_speed_hz ? : 5 * 1000 * 1000;
else
spi->max_speed_hz = spi->max_speed_hz ? : 10 * 1000 * 1000;
spi->bits_per_word = 8;
spi_setup(spi);
/* Here is OK to not lock the MCP, no one knows about it yet */
if (!mcp251x_hw_probe(spi)) {
dev_info(&spi->dev, "Probe failed\n");
ret = -ENODEV;
goto error_probe;
}
mcp251x_hw_sleep(spi);
if (pdata->transceiver_enable)
pdata->transceiver_enable(0);
ret = register_candev(net);
if (ret)
goto error_probe;
......@@ -1109,13 +1114,13 @@ static int mcp251x_can_probe(struct spi_device *spi)
if (!mcp251x_enable_dma)
kfree(priv->spi_tx_buf);
error_tx_buf:
free_candev(net);
if (mcp251x_enable_dma)
dma_free_coherent(&spi->dev, PAGE_SIZE,
priv->spi_tx_buf, priv->spi_tx_dma);
mcp251x_power_enable(priv->power, 0);
error_power:
free_candev(net);
error_alloc:
if (pdata->power_enable)
pdata->power_enable(0);
dev_err(&spi->dev, "probe failed\n");
error_out:
return ret;
......@@ -1123,12 +1128,10 @@ static int mcp251x_can_probe(struct spi_device *spi)
static int mcp251x_can_remove(struct spi_device *spi)
{
struct mcp251x_platform_data *pdata = spi->dev.platform_data;
struct mcp251x_priv *priv = spi_get_drvdata(spi);
struct net_device *net = priv->net;
unregister_candev(net);
free_candev(net);
if (mcp251x_enable_dma) {
dma_free_coherent(&spi->dev, PAGE_SIZE,
......@@ -1138,8 +1141,9 @@ static int mcp251x_can_remove(struct spi_device *spi)
kfree(priv->spi_rx_buf);
}
if (pdata->power_enable)
pdata->power_enable(0);
mcp251x_power_enable(priv->power, 0);
free_candev(net);
return 0;
}
......@@ -1149,7 +1153,6 @@ static int mcp251x_can_remove(struct spi_device *spi)
static int mcp251x_can_suspend(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
struct mcp251x_platform_data *pdata = spi->dev.platform_data;
struct mcp251x_priv *priv = spi_get_drvdata(spi);
struct net_device *net = priv->net;
......@@ -1163,15 +1166,14 @@ static int mcp251x_can_suspend(struct device *dev)
netif_device_detach(net);
mcp251x_hw_sleep(spi);
if (pdata->transceiver_enable)
pdata->transceiver_enable(0);
mcp251x_power_enable(priv->transceiver, 0);
priv->after_suspend = AFTER_SUSPEND_UP;
} else {
priv->after_suspend = AFTER_SUSPEND_DOWN;
}
if (pdata->power_enable) {
pdata->power_enable(0);
if (!IS_ERR(priv->power)) {
regulator_disable(priv->power);
priv->after_suspend |= AFTER_SUSPEND_POWER;
}
......@@ -1181,16 +1183,14 @@ static int mcp251x_can_suspend(struct device *dev)
static int mcp251x_can_resume(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
struct mcp251x_platform_data *pdata = spi->dev.platform_data;
struct mcp251x_priv *priv = spi_get_drvdata(spi);
if (priv->after_suspend & AFTER_SUSPEND_POWER) {
pdata->power_enable(1);
mcp251x_power_enable(priv->power, 1);
queue_work(priv->wq, &priv->restart_work);
} else {
if (priv->after_suspend & AFTER_SUSPEND_UP) {
if (pdata->transceiver_enable)
pdata->transceiver_enable(1);
mcp251x_power_enable(priv->transceiver, 1);
queue_work(priv->wq, &priv->restart_work);
} else {
priv->after_suspend = 0;
......
......@@ -9,26 +9,13 @@
#include <linux/spi/spi.h>
/**
/*
* struct mcp251x_platform_data - MCP251X SPI CAN controller platform data
* @oscillator_frequency: - oscillator frequency in Hz
* @irq_flags: - IRQF configuration flags
* @board_specific_setup: - called before probing the chip (power,reset)
* @transceiver_enable: - called to power on/off the transceiver
* @power_enable: - called to power on/off the mcp *and* the
* transceiver
*
* Please note that you should define power_enable or transceiver_enable or
* none of them. Defining both of them is no use.
*
*/
struct mcp251x_platform_data {
unsigned long oscillator_frequency;
unsigned long irq_flags;
int (*board_specific_setup)(struct spi_device *spi);
int (*transceiver_enable)(int enable);
int (*power_enable) (int enable);
};
#endif /* __CAN_PLATFORM_MCP251X_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment