Commit d94a3d3e authored by Heiko Schocher's avatar Heiko Schocher Committed by Shawn Guo

ARM: dts: imx6: add DT for aristainetos2 board

This patch adds support for the imx6dl based aristainetos2 board
with following configuration:

CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
MReset cause: POR
MBoard: aristaitenos2
DRAM:  1 GiB
NAND:  1024 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16 MiB
Display: lb07wv8 (800x480)

As this board can be used with 2 different display types, the
differences between them are extracted into 2 DTS files, and
the common settings are collected in a common file.
Signed-off-by: default avatarHeiko Schocher <hs@denx.de>
Reviewed-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
parent f4b5939d
...@@ -257,6 +257,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ ...@@ -257,6 +257,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-apf6dev.dtb \ imx6dl-apf6dev.dtb \
imx6dl-aristainetos_4.dtb \ imx6dl-aristainetos_4.dtb \
imx6dl-aristainetos_7.dtb \ imx6dl-aristainetos_7.dtb \
imx6dl-aristainetos2_4.dtb \
imx6dl-aristainetos2_7.dtb \
imx6dl-cubox-i.dtb \ imx6dl-cubox-i.dtb \
imx6dl-dfi-fs700-m60.dtb \ imx6dl-dfi-fs700-m60.dtb \
imx6dl-gw51xx.dtb \ imx6dl-gw51xx.dtb \
......
/*
* support for the imx6 based aristainetos2 board
*
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-aristainetos2.dtsi"
/ {
model = "aristainetos2 i.MX6 Dual Lite Board 4";
compatible = "fsl,imx6dl";
memory {
reg = <0x10000000 0x40000000>;
};
display0: display@di0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp>;
port@0 {
reg = <0>;
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
port@1 {
reg = <1>;
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
&ecspi1 {
lcd_panel: display@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lg,lg4573";
spi-max-frequency = <10000000>;
reg = <0>;
power-on-delay = <10>;
display-timings {
480x800p57 {
native-mode;
clock-frequency = <27000027>;
hactive = <480>;
vactive = <800>;
hfront-porch = <10>;
hback-porch = <59>;
hsync-len = <10>;
vback-porch = <15>;
vfront-porch = <15>;
vsync-len = <15>;
hsync-active = <1>;
vsync-active = <1>;
};
};
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
};
&i2c3 {
touch: touch@4b {
compatible = "atmel,maxtouch";
reg = <0x4b>;
interrupt-parent = <&gpio2>;
interrupts = <9 8>;
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&iomuxc {
pinctrl_ipu_disp: ipudisp1grp {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xE1
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xE1
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xE1
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xE1
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xE1
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xE1
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xE1
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xE1
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xE1
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xE1
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xE1
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xE1
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xE1
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xE1
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xE1
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xe1
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xE1
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xE1
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xE1
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xE1
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xE1
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xE1
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xE1
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xE1
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xE1
>;
};
};
/*
* support for the imx6 based aristainetos2 board
*
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-aristainetos2.dtsi"
/ {
model = "aristainetos2 i.MX6 Dual Lite Board 7";
compatible = "fsl,imx6dl";
memory {
reg = <0x10000000 0x40000000>;
};
panel: panel {
compatible = "lg,lb070wv8";
backlight = <&backlight>;
enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
port {
panel_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
};
&i2c3 {
touch: touch@4d {
compatible = "atmel,maxtouch";
reg = <0x4d>;
interrupt-parent = <&gpio2>;
interrupts = <9 8>;
};
};
&ldb {
status = "okay";
lvds-channel@0 {
status = "okay";
port@0 {
reg = <0>;
lvds0_in: endpoint {
remote-endpoint = <&ipu1_di0_lvds0>;
};
};
port@4 {
reg = <4>;
lvds0_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment