ARM: at91: dts: add i2c dma support

Add DMA resources to i2c nodes.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[nicolas.ferre@atmel.com: correct 9n12 dma phandle name]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -361,6 +361,9 @@ i2c0: i2c@f8010000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8010000 0x100>;
 				interrupts = <9 4 6>;
+				dmas = <&dma 1 13>,
+				       <&dma 1 14>;
+				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -370,6 +373,9 @@ i2c1: i2c@f8014000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8014000 0x100>;
 				interrupts = <10 4 6>;
+				dmas = <&dma 1 15>,
+				       <&dma 1 16>;
+				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -447,6 +447,9 @@ i2c0: i2c@f8010000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8010000 0x100>;
 				interrupts = <9 4 6>;
+				dmas = <&dma0 1 7>,
+				       <&dma0 1 8>;
+				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -456,6 +459,9 @@ i2c1: i2c@f8014000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8014000 0x100>;
 				interrupts = <10 4 6>;
+				dmas = <&dma1 1 5>,
+				       <&dma1 1 6>;
+				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -465,6 +471,9 @@ i2c2: i2c@f8018000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8018000 0x100>;
 				interrupts = <11 4 6>;
+				dmas = <&dma0 1 9>,
+				       <&dma0 1 10>;
+				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";

arch/arm/boot/dts/sama5d3.dtsi

@@ -111,6 +111,9 @@ i2c0: i2c@f0014000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf0014000 0x4000>;
 				interrupts = <18 4 6>;
+				dmas = <&dma0 2 7>,
+				       <&dma0 2 8>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c0>;
 				#address-cells = <1>;
@@ -122,6 +125,9 @@ i2c1: i2c@f0018000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf0018000 0x4000>;
 				interrupts = <19 4 6>;
+				dmas = <&dma0 2 9>,
+				       <&dma0 2 10>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1>;
 				#address-cells = <1>;
@@ -294,6 +300,9 @@ i2c2: i2c@f801c000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf801c000 0x4000>;
 				interrupts = <20 4 6>;
+				dmas = <&dma1 2 11>,
+				       <&dma1 2 12>;
+				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";