Commit d9a64c5e authored by Kunihiko Hayashi's avatar Kunihiko Hayashi Committed by Rob Herring

dt-bindings: PCI: uniphier: Convert uniphier-pcie.txt to json-schema

Convert the file into a JSON description at the yaml format.
Signed-off-by: default avatarKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: default avatarRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1648617814-9217-2-git-send-email-hayashi.kunihiko@socionext.com
parent 31231092
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Socionext UniPhier PCIe host controller
description: |
UniPhier PCIe host controller is based on the Synopsys DesignWare
PCI core. It shares common features with the PCIe DesignWare core and
inherits common properties defined in
Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
maintainers:
- Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
allOf:
- $ref: /schemas/pci/snps,dw-pcie.yaml#
properties:
compatible:
enum:
- socionext,uniphier-pcie
reg:
minItems: 3
maxItems: 4
reg-names:
minItems: 3
items:
- const: dbi
- const: link
- const: config
- const: atu
clocks:
maxItems: 1
resets:
maxItems: 1
num-viewport: true
num-lanes: true
phys:
maxItems: 1
phy-names:
const: pcie-phy
required:
- compatible
- reg
- reg-names
- clocks
- resets
unevaluatedProperties: false
examples:
- |
pcie: pcie@66000000 {
compatible = "socionext,uniphier-pcie";
reg-names = "dbi", "link", "config";
reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>;
#address-cells = <3>;
#size-cells = <2>;
clocks = <&sys_clk 24>;
resets = <&sys_rst 24>;
num-lanes = <1>;
num-viewport = <1>;
bus-range = <0x0 0xff>;
device_type = "pci";
ranges = <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>,
<0x82000000 0 0x00000000 0x20000000 0 0x0ffe0000>;
phy-names = "pcie-phy";
phys = <&pcie_phy>;
#interrupt-cells = <1>;
interrupt-names = "dma", "msi";
interrupts = <0 224 4>, <0 225 4>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 0>,
<0 0 0 2 &pcie_intc 1>,
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <0 226 4>;
};
};
Socionext UniPhier PCIe host controller bindings
This describes the devicetree bindings for PCIe host controller implemented
on Socionext UniPhier SoCs.
UniPhier PCIe host controller is based on the Synopsys DesignWare PCI core.
It shares common functions with the PCIe DesignWare core driver and inherits
common properties defined in
Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
Required properties:
- compatible: Should be "socionext,uniphier-pcie".
- reg: Specifies offset and length of the register set for the device.
According to the reg-names, appropriate register sets are required.
- reg-names: Must include the following entries:
"dbi" - controller configuration registers
"link" - SoC-specific glue layer registers
"config" - PCIe configuration space
"atu" - iATU registers for DWC version 4.80 or later
- clocks: A phandle to the clock gate for PCIe glue layer including
the host controller.
- resets: A phandle to the reset line for PCIe glue layer including
the host controller.
- interrupts: A list of interrupt specifiers. According to the
interrupt-names, appropriate interrupts are required.
- interrupt-names: Must include the following entries:
"dma" - DMA interrupt
"msi" - MSI interrupt
Optional properties:
- phys: A phandle to generic PCIe PHY. According to the phy-names, appropriate
phys are required.
- phy-names: Must be "pcie-phy".
Required sub-node:
- legacy-interrupt-controller: Specifies interrupt controller for legacy PCI
interrupts.
Required properties for legacy-interrupt-controller:
- interrupt-controller: identifies the node as an interrupt controller.
- #interrupt-cells: specifies the number of cells needed to encode an
interrupt source. The value must be 1.
- interrupt-parent: Phandle to the parent interrupt controller.
- interrupts: An interrupt specifier for legacy interrupt.
Example:
pcie: pcie@66000000 {
compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
status = "disabled";
reg-names = "dbi", "link", "config";
reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
<0x2fff0000 0x10000>;
#address-cells = <3>;
#size-cells = <2>;
clocks = <&sys_clk 24>;
resets = <&sys_rst 24>;
num-lanes = <1>;
num-viewport = <1>;
bus-range = <0x0 0xff>;
device_type = "pci";
ranges =
/* downstream I/O */
<0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000
/* non-prefetchable memory */
0x82000000 0 0x00000000 0x20000000 0 0x0ffe0000>;
#interrupt-cells = <1>;
interrupt-names = "dma", "msi";
interrupts = <0 224 4>, <0 225 4>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */
<0 0 0 2 &pcie_intc 1>, /* INTB */
<0 0 0 3 &pcie_intc 2>, /* INTC */
<0 0 0 4 &pcie_intc 3>; /* INTD */
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <0 226 4>;
};
};
......@@ -15357,7 +15357,7 @@ PCIE DRIVER FOR SOCIONEXT UNIPHIER
M: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/pci/uniphier-pcie*
F: Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
F: drivers/pci/controller/dwc/pcie-uniphier*
PCIE DRIVER FOR ST SPEAR13XX
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment