Skip to content

L
linux
Commit d9b327c3 authored by Jean Delvare's avatar Jean Delvare
Browse files
Options

hwmon: (it87) Add support for beep on alarm 

The IT87xxF chips support beeping on alarm, if properly wired and
configured. There is one control bit for each input type (temperature,
fan, voltage.) Let the user see and change them.
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 6a8d7acf
Hide whitespace changes
Inline Side-by-side
Showing with 126 additions and 0 deletions
Documentation/hwmon/it87
View file @ d9b327c3
......@@ -136,6 +136,10 @@ registers are read whenever any data is read (unless it is less than 1.5
seconds since the last update). This means that you can easily miss
once-only alarms.
Out-of-limit readings can also result in beeping, if the chip is properly
wired and configured. Beeping can be enabled or disabled per sensor type
(temperatures, voltages and fans.)
The IT87xx only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.
......
drivers/hwmon/it87.c
View file @ d9b327c3
......@@ -128,6 +128,7 @@ superio_exit(void)
#define IT87_SIO_GPIO5_REG 0x29
#define IT87_SIO_PINX2_REG 0x2c /* Pin selection */
#define IT87_SIO_VID_REG 0xfc /* VID value */
#define IT87_SIO_BEEP_PIN_REG 0xf6 /* Beep pin mapping */
/* Update battery voltage after every reading if true */
static int update_vbat;
......@@ -187,6 +188,7 @@ static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
#define IT87_REG_VIN_ENABLE 0x50
#define IT87_REG_TEMP_ENABLE 0x51
#define IT87_REG_BEEP_ENABLE 0x5c
#define IT87_REG_CHIPID 0x58
......@@ -246,6 +248,7 @@ struct it87_sio_data {
/* Values read from Super-I/O config space */
u8 revision;
u8 vid_value;
u8 beep_pin;
/* Features skipped based on config or DMI */
u8 skip_vid;
u8 skip_fan;
......@@ -279,6 +282,7 @@ struct it87_data {
u8 vid; /* Register encoding, combined */
u8 vrm;
u32 alarms; /* Register encoding, combined */
u8 beeps; /* Register encoding */
u8 fan_main_ctrl; /* Register value */
u8 fan_ctl; /* Register value */
......@@ -919,6 +923,55 @@ static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
char *buf)
{
int bitnr = to_sensor_dev_attr(attr)->index;
struct it87_data *data = it87_update_device(dev);
return sprintf(buf, "%u\n", (data->beeps >> bitnr) & 1);
}
static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int bitnr = to_sensor_dev_attr(attr)->index;
struct it87_data *data = dev_get_drvdata(dev);
long val;
if (strict_strtol(buf, 10, &val) < 0
|| (val != 0 && val != 1))
return -EINVAL;
mutex_lock(&data->update_lock);
data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
if (val)
data->beeps |= (1 << bitnr);
else
data->beeps &= ~(1 << bitnr);
it87_write_value(data, IT87_REG_BEEP_ENABLE, data->beeps);
mutex_unlock(&data->update_lock);
return count;
}
static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
show_beep, set_beep, 1);
static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO, show_beep, NULL, 1);
/* fanX_beep writability is set later */
static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan4_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan5_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
show_beep, set_beep, 2);
static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO, show_beep, NULL, 2);
static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO, show_beep, NULL, 2);
static ssize_t
show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
......@@ -1014,6 +1067,26 @@ static const struct attribute_group it87_group = {
.attrs = it87_attributes,
};
static struct attribute *it87_attributes_beep[] = {
&sensor_dev_attr_in0_beep.dev_attr.attr,
&sensor_dev_attr_in1_beep.dev_attr.attr,
&sensor_dev_attr_in2_beep.dev_attr.attr,
&sensor_dev_attr_in3_beep.dev_attr.attr,
&sensor_dev_attr_in4_beep.dev_attr.attr,
&sensor_dev_attr_in5_beep.dev_attr.attr,
&sensor_dev_attr_in6_beep.dev_attr.attr,
&sensor_dev_attr_in7_beep.dev_attr.attr,
&sensor_dev_attr_temp1_beep.dev_attr.attr,
&sensor_dev_attr_temp2_beep.dev_attr.attr,
&sensor_dev_attr_temp3_beep.dev_attr.attr,
NULL
};
static const struct attribute_group it87_group_beep = {
.attrs = it87_attributes_beep,
};
static struct attribute *it87_attributes_fan16[5][3+1] = { {
&sensor_dev_attr_fan1_input16.dev_attr.attr,
&sensor_dev_attr_fan1_min16.dev_attr.attr,
......@@ -1107,6 +1180,14 @@ static const struct attribute_group it87_group_pwm[3] = {
{ .attrs = it87_attributes_pwm[2] },
};
static struct attribute *it87_attributes_fan_beep[] = {
&sensor_dev_attr_fan1_beep.dev_attr.attr,
&sensor_dev_attr_fan2_beep.dev_attr.attr,
&sensor_dev_attr_fan3_beep.dev_attr.attr,
&sensor_dev_attr_fan4_beep.dev_attr.attr,
&sensor_dev_attr_fan5_beep.dev_attr.attr,
};
static struct attribute *it87_attributes_vid[] = {
&dev_attr_vrm.attr,
&dev_attr_cpu0_vid.attr,
......@@ -1174,6 +1255,10 @@ static int __init it87_find(unsigned short *address,
if (sio_data->type == it87) {
/* The IT8705F doesn't have VID pins at all */
sio_data->skip_vid = 1;
/* The IT8705F has a different LD number for GPIO */
superio_select(5);
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
} else {
int reg;
......@@ -1207,7 +1292,11 @@ static int __init it87_find(unsigned short *address,
pr_info("it87: in3 is VCC (+5V)\n");
if (reg & (1 << 1))
pr_info("it87: in7 is VCCH (+5V Stand-By)\n");
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
}
if (sio_data->beep_pin)
pr_info("it87: Beeping is supported\n");
/* Disable specific features based on DMI strings */
board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
......@@ -1240,10 +1329,15 @@ static void it87_remove_files(struct device *dev)
int i;
sysfs_remove_group(&dev->kobj, &it87_group);
if (sio_data->beep_pin)
sysfs_remove_group(&dev->kobj, &it87_group_beep);
for (i = 0; i < 5; i++) {
if (!(data->has_fan & (1 << i)))
continue;
sysfs_remove_group(&dev->kobj, &fan_group[i]);
if (sio_data->beep_pin)
sysfs_remove_file(&dev->kobj,
it87_attributes_fan_beep[i]);
}
for (i = 0; i < 3; i++) {
if (sio_data->skip_pwm & (1 << 0))
......@@ -1263,6 +1357,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
const struct attribute_group *fan_group;
int err = 0, i;
int enable_pwm_interface;
int fan_beep_need_rw;
static const char *names[] = {
"it87",
"it8712",
......@@ -1311,14 +1406,40 @@ static int __devinit it87_probe(struct platform_device *pdev)
if ((err = sysfs_create_group(&dev->kobj, &it87_group)))
goto ERROR2;
if (sio_data->beep_pin) {
err = sysfs_create_group(&dev->kobj, &it87_group_beep);
if (err)
goto ERROR4;
}
/* Do not create fan files for disabled fans */
fan_group = it87_get_fan_group(data);
fan_beep_need_rw = 1;
for (i = 0; i < 5; i++) {
if (!(data->has_fan & (1 << i)))
continue;
err = sysfs_create_group(&dev->kobj, &fan_group[i]);
if (err)
goto ERROR4;
if (sio_data->beep_pin) {
err = sysfs_create_file(&dev->kobj,
it87_attributes_fan_beep[i]);
if (err)
goto ERROR4;
if (!fan_beep_need_rw)
continue;
/* As we have a single beep enable bit for all fans,
* only the first enabled fan has a writable attribute
* for it. */
if (sysfs_chmod_file(&dev->kobj,
it87_attributes_fan_beep[i],
S_IRUGO | S_IWUSR))
dev_dbg(dev, "chmod +w fan%d_beep failed\n",
i + 1);
fan_beep_need_rw = 0;
}
}
if (enable_pwm_interface) {
......@@ -1608,6 +1729,7 @@ static struct it87_data *it87_update_device(struct device *dev)
it87_read_value(data, IT87_REG_ALARM1) |
(it87_read_value(data, IT87_REG_ALARM2) << 8) |
(it87_read_value(data, IT87_REG_ALARM3) << 16);
data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
data->fan_main_ctrl = it87_read_value(data,
IT87_REG_FAN_MAIN_CTRL);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7