scsi: qla2xxx: Add NVMe parameters support in Auxiliary Image Status

Add new API to obtain the NVMe Parameters region status from the Auxiliary
Image Status bitmap.

Link: https://lore.kernel.org/r/20220826102559.17474-5-njavali@marvell.comReviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/qla2xxx/qla_bsg.c

@@ -2519,19 +2519,23 @@ qla2x00_get_flash_image_status(struct bsg_job *bsg_job)
 	qla27xx_get_active_image(vha, &active_regions);
 	regions.global_image = active_regions.global;
 
+	if (IS_QLA27XX(ha))
+		regions.nvme_params = QLA27XX_PRIMARY_IMAGE;
+
 	if (IS_QLA28XX(ha)) {
 		qla28xx_get_aux_images(vha, &active_regions);
 		regions.board_config = active_regions.aux.board_config;
 		regions.vpd_nvram = active_regions.aux.vpd_nvram;
 		regions.npiv_config_0_1 = active_regions.aux.npiv_config_0_1;
 		regions.npiv_config_2_3 = active_regions.aux.npiv_config_2_3;
+		regions.nvme_params = active_regions.aux.nvme_params;
 	}
 
 	ql_dbg(ql_dbg_user, vha, 0x70e1,
-	    "%s(%lu): FW=%u BCFG=%u VPDNVR=%u NPIV01=%u NPIV02=%u\n",
+	    "%s(%lu): FW=%u BCFG=%u VPDNVR=%u NPIV01=%u NPIV02=%u NVME_PARAMS=%u\n",
 	    __func__, vha->host_no, regions.global_image,
 	    regions.board_config, regions.vpd_nvram,
-	    regions.npiv_config_0_1, regions.npiv_config_2_3);
+	    regions.npiv_config_0_1, regions.npiv_config_2_3, regions.nvme_params);
 
 	sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
 	    bsg_job->reply_payload.sg_cnt, &regions, sizeof(regions));

drivers/scsi/qla2xxx/qla_bsg.h

@@ -314,7 +314,8 @@ struct qla_active_regions {
 	uint8_t vpd_nvram;
 	uint8_t npiv_config_0_1;
 	uint8_t npiv_config_2_3;
-	uint8_t reserved[32];
+	uint8_t nvme_params;
+	uint8_t reserved[31];
 } __packed;
 
 #include "qla_edif_bsg.h"

drivers/scsi/qla2xxx/qla_def.h

@@ -4773,6 +4773,7 @@ struct active_regions {
 		uint8_t vpd_nvram;
 		uint8_t npiv_config_0_1;
 		uint8_t npiv_config_2_3;
+		uint8_t nvme_params;
 	} aux;
 };
 
@@ -5057,6 +5058,7 @@ struct qla27xx_image_status {
 #define QLA28XX_AUX_IMG_VPD_NVRAM		BIT_1
 #define QLA28XX_AUX_IMG_NPIV_CONFIG_0_1		BIT_2
 #define QLA28XX_AUX_IMG_NPIV_CONFIG_2_3		BIT_3
+#define QLA28XX_AUX_IMG_NVME_PARAMS		BIT_4
 
 #define SET_VP_IDX	1
 #define SET_AL_PA	2

drivers/scsi/qla2xxx/qla_fw.h

@@ -1675,6 +1675,7 @@ struct qla_flt_location {
 #define FLT_REG_VPD_SEC_27XX_1	0x52
 #define FLT_REG_VPD_SEC_27XX_2	0xD8
 #define FLT_REG_VPD_SEC_27XX_3	0xDA
+#define FLT_REG_NVME_PARAMS_27XX	0x21
 
 /* 28xx */
 #define FLT_REG_AUX_IMG_PRI_28XX	0x125
@@ -1691,6 +1692,8 @@ struct qla_flt_location {
 #define FLT_REG_MPI_SEC_28XX		0xF0
 #define FLT_REG_PEP_PRI_28XX		0xD1
 #define FLT_REG_PEP_SEC_28XX		0xF1
+#define FLT_REG_NVME_PARAMS_PRI_28XX	0x14E
+#define FLT_REG_NVME_PARAMS_SEC_28XX	0x179
 
 struct qla_flt_region {
 	__le16	code;

drivers/scsi/qla2xxx/qla_init.c

@@ -7933,6 +7933,9 @@ qla28xx_component_status(
 
 	active_regions->aux.npiv_config_2_3 =
 	    qla28xx_component_bitmask(aux, QLA28XX_AUX_IMG_NPIV_CONFIG_2_3);
+
+	active_regions->aux.nvme_params =
+	    qla28xx_component_bitmask(aux, QLA28XX_AUX_IMG_NVME_PARAMS);
 }
 
 static int
@@ -8041,11 +8044,12 @@ qla28xx_get_aux_images(
 	}
 
 	ql_dbg(ql_dbg_init, vha, 0x018f,
-	    "aux images active: BCFG=%u VPD/NVR=%u NPIV0/1=%u NPIV2/3=%u\n",
+	    "aux images active: BCFG=%u VPD/NVR=%u NPIV0/1=%u NPIV2/3=%u, NVME=%u\n",
 	    active_regions->aux.board_config,
 	    active_regions->aux.vpd_nvram,
 	    active_regions->aux.npiv_config_0_1,
-	    active_regions->aux.npiv_config_2_3);
+	    active_regions->aux.npiv_config_2_3,
+	    active_regions->aux.nvme_params);
 }
 
 void