Commit d9e8fd04 authored by Stefan Popa's avatar Stefan Popa Committed by Jonathan Cameron

iio: adxl372: Refactor the driver

This patch restructures the existing adxl372 driver by adding a module for
SPI and a header file, while the baseline module deals with the chip-logic.

This is a necessary step, as this driver should support in the future
a similar device which differs only in the type of interface used (I2C
instead of SPI).
Signed-off-by: default avatarStefan Popa <stefan.popa@analog.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 7ac34682
......@@ -548,6 +548,7 @@ M: Stefan Popa <stefan.popa@analog.com>
W: http://ez.analog.com/community/linux-device-drivers
S: Supported
F: drivers/iio/accel/adxl372.c
F: drivers/iio/accel/adxl372_spi.c
F: Documentation/devicetree/bindings/iio/accel/adxl372.txt
AF9013 MEDIA DRIVER
......
......@@ -61,15 +61,20 @@ config ADXL345_SPI
for the core module.
config ADXL372
tristate "Analog Devices ADXL372 3-Axis Accelerometer Driver"
depends on SPI
tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
config ADXL372_SPI
tristate "Analog Devices ADXL372 3-Axis Accelerometer SPI Driver"
depends on SPI
select ADXL372
select REGMAP_SPI
help
Say yes here to add support for the Analog Devices ADXL372 triaxial
acceleration sensor.
To compile this driver as a module, choose M here: the
module will be called adxl372.
module will be called adxl372_spi.
config BMA180
tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
......
......@@ -10,6 +10,7 @@ obj-$(CONFIG_ADXL345) += adxl345_core.o
obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
obj-$(CONFIG_ADXL372) += adxl372.o
obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o
obj-$(CONFIG_BMA180) += bma180.o
obj-$(CONFIG_BMA220) += bma220_spi.o
obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
......
// SPDX-License-Identifier: GPL-2.0+
/*
* ADXL372 3-Axis Digital Accelerometer SPI driver
* ADXL372 3-Axis Digital Accelerometer core driver
*
* Copyright 2018 Analog Devices Inc.
*/
......@@ -20,6 +20,8 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include "adxl372.h"
/* ADXL372 registers definition */
#define ADXL372_DEVID 0x00
#define ADXL372_DEVID_MST 0x01
......@@ -246,7 +248,8 @@ static const struct iio_chan_spec adxl372_channels[] = {
};
struct adxl372_state {
struct spi_device *spi;
int irq;
struct device *dev;
struct regmap *regmap;
struct iio_trigger *dready_trig;
enum adxl372_fifo_mode fifo_mode;
......@@ -565,7 +568,7 @@ static int adxl372_setup(struct adxl372_state *st)
return ret;
if (regval != ADXL372_DEVID_VAL) {
dev_err(&st->spi->dev, "Invalid chip id %x\n", regval);
dev_err(st->dev, "Invalid chip id %x\n", regval);
return -ENODEV;
}
......@@ -891,56 +894,45 @@ static const struct iio_info adxl372_info = {
.hwfifo_set_watermark = adxl372_set_watermark,
};
static bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg)
bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg)
{
return (reg == ADXL372_FIFO_DATA);
}
EXPORT_SYMBOL_GPL(adxl372_readable_noinc_reg);
static const struct regmap_config adxl372_spi_regmap_config = {
.reg_bits = 7,
.pad_bits = 1,
.val_bits = 8,
.read_flag_mask = BIT(0),
.readable_noinc_reg = adxl372_readable_noinc_reg,
};
static int adxl372_probe(struct spi_device *spi)
int adxl372_probe(struct device *dev, struct regmap *regmap,
int irq, const char *name)
{
struct iio_dev *indio_dev;
struct adxl372_state *st;
struct regmap *regmap;
int ret;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
spi_set_drvdata(spi, indio_dev);
st->spi = spi;
regmap = devm_regmap_init_spi(spi, &adxl372_spi_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
dev_set_drvdata(dev, indio_dev);
st->dev = dev;
st->regmap = regmap;
st->irq = irq;
indio_dev->channels = adxl372_channels;
indio_dev->num_channels = ARRAY_SIZE(adxl372_channels);
indio_dev->available_scan_masks = adxl372_channel_masks;
indio_dev->dev.parent = &spi->dev;
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->dev.parent = dev;
indio_dev->name = name;
indio_dev->info = &adxl372_info;
indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
ret = adxl372_setup(st);
if (ret < 0) {
dev_err(&st->spi->dev, "ADXL372 setup failed\n");
dev_err(dev, "ADXL372 setup failed\n");
return ret;
}
ret = devm_iio_triggered_buffer_setup(&st->spi->dev,
ret = devm_iio_triggered_buffer_setup(dev,
indio_dev, NULL,
adxl372_trigger_handler,
&adxl372_buffer_ops);
......@@ -949,8 +941,8 @@ static int adxl372_probe(struct spi_device *spi)
iio_buffer_set_attrs(indio_dev->buffer, adxl372_fifo_attributes);
if (st->spi->irq) {
st->dready_trig = devm_iio_trigger_alloc(&st->spi->dev,
if (st->irq) {
st->dready_trig = devm_iio_trigger_alloc(dev,
"%s-dev%d",
indio_dev->name,
indio_dev->id);
......@@ -958,15 +950,15 @@ static int adxl372_probe(struct spi_device *spi)
return -ENOMEM;
st->dready_trig->ops = &adxl372_trigger_ops;
st->dready_trig->dev.parent = &st->spi->dev;
st->dready_trig->dev.parent = dev;
iio_trigger_set_drvdata(st->dready_trig, indio_dev);
ret = devm_iio_trigger_register(&st->spi->dev, st->dready_trig);
ret = devm_iio_trigger_register(dev, st->dready_trig);
if (ret < 0)
return ret;
indio_dev->trig = iio_trigger_get(st->dready_trig);
ret = devm_request_threaded_irq(&st->spi->dev, st->spi->irq,
ret = devm_request_threaded_irq(dev, st->irq,
iio_trigger_generic_data_rdy_poll,
NULL,
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
......@@ -975,24 +967,9 @@ static int adxl372_probe(struct spi_device *spi)
return ret;
}
return devm_iio_device_register(&st->spi->dev, indio_dev);
return devm_iio_device_register(dev, indio_dev);
}
static const struct spi_device_id adxl372_id[] = {
{ "adxl372", 0 },
{}
};
MODULE_DEVICE_TABLE(spi, adxl372_id);
static struct spi_driver adxl372_driver = {
.driver = {
.name = KBUILD_MODNAME,
},
.probe = adxl372_probe,
.id_table = adxl372_id,
};
module_spi_driver(adxl372_driver);
EXPORT_SYMBOL_GPL(adxl372_probe);
MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
MODULE_DESCRIPTION("Analog Devices ADXL372 3-axis accelerometer driver");
......
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* ADXL372 3-Axis Digital Accelerometer
*
* Copyright 2018 Analog Devices Inc.
*/
#ifndef _ADXL372_H_
#define _ADXL372_H_
int adxl372_probe(struct device *dev, struct regmap *regmap,
int irq, const char *name);
bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg);
#endif /* _ADXL372_H_ */
// SPDX-License-Identifier: GPL-2.0+
/*
* ADXL372 3-Axis Digital Accelerometer SPI driver
*
* Copyright 2018 Analog Devices Inc.
*/
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
#include "adxl372.h"
static const struct regmap_config adxl372_spi_regmap_config = {
.reg_bits = 7,
.pad_bits = 1,
.val_bits = 8,
.read_flag_mask = BIT(0),
.readable_noinc_reg = adxl372_readable_noinc_reg,
};
static int adxl372_spi_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
struct regmap *regmap;
regmap = devm_regmap_init_spi(spi, &adxl372_spi_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
return adxl372_probe(&spi->dev, regmap, spi->irq, id->name);
}
static const struct spi_device_id adxl372_spi_id[] = {
{ "adxl372", 0 },
{}
};
MODULE_DEVICE_TABLE(spi, adxl372_spi_id);
static struct spi_driver adxl372_spi_driver = {
.driver = {
.name = "adxl372_spi",
},
.probe = adxl372_spi_probe,
.id_table = adxl372_spi_id,
};
module_spi_driver(adxl372_spi_driver);
MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
MODULE_DESCRIPTION("Analog Devices ADXL372 3-axis accelerometer SPI driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment