Commit da028779 authored by Catalin Marinas's avatar Catalin Marinas

ARM: LPAE: Page table maintenance for the 3-level format

This patch modifies the pgd/pmd/pte manipulation functions to support
the 3-level page table format. Since there is no need for an 'ext'
argument to cpu_set_pte_ext(), this patch conditionally defines a
different prototype for this function when CONFIG_ARM_LPAE.

The patch also introduces the L_PGD_SWAPPER flag to mark pgd entries
pointing to pmd tables pre-allocated in the swapper_pg_dir and avoid
trying to free them at run-time. This flag is 0 with the classic page
table format.
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
parent dcfdae04
......@@ -25,6 +25,26 @@
#define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
#define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
#ifdef CONFIG_ARM_LPAE
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
{
return (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
}
static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
{
BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
free_page((unsigned long)pmd);
}
static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
{
set_pud(pud, __pud(__pa(pmd) | PMD_TYPE_TABLE));
}
#else /* !CONFIG_ARM_LPAE */
/*
* Since we have only two-level page tables, these are trivial
*/
......@@ -32,6 +52,8 @@
#define pmd_free(mm, pmd) do { } while (0)
#define pud_populate(mm,pmd,pte) BUG()
#endif /* CONFIG_ARM_LPAE */
extern pgd_t *pgd_alloc(struct mm_struct *mm);
extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
......@@ -109,7 +131,9 @@ static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte,
{
pmdval_t pmdval = (pte + PTE_HWTABLE_OFF) | prot;
pmdp[0] = __pmd(pmdval);
#ifndef CONFIG_ARM_LPAE
pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
#endif
flush_pmd_entry(pmdp);
}
......
......@@ -99,4 +99,57 @@
#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 3) << 2) /* normal inner write-back */
#define L_PTE_MT_MASK (_AT(pteval_t, 7) << 2)
/*
* Software PGD flags.
*/
#define L_PGD_SWAPPER (_AT(pgdval_t, 1) << 55) /* swapper_pg_dir entry */
#ifndef __ASSEMBLY__
#define pud_none(pud) (!pud_val(pud))
#define pud_bad(pud) (!(pud_val(pud) & 2))
#define pud_present(pud) (pud_val(pud))
#define pud_clear(pudp) \
do { \
*pudp = __pud(0); \
clean_pmd_entry(pudp); \
} while (0)
#define set_pud(pudp, pud) \
do { \
*pudp = pud; \
flush_pmd_entry(pudp); \
} while (0)
static inline pmd_t *pud_page_vaddr(pud_t pud)
{
return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK);
}
/* Find an entry in the second-level page table.. */
#define pmd_index(addr) (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr);
}
#define pmd_bad(pmd) (!(pmd_val(pmd) & 2))
#define copy_pmd(pmdpd,pmdps) \
do { \
*pmdpd = *pmdps; \
flush_pmd_entry(pmdpd); \
} while (0)
#define pmd_clear(pmdp) \
do { \
*pmdp = __pmd(0); \
clean_pmd_entry(pmdp); \
} while (0)
#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,__pte(pte_val(pte)|(ext)))
#endif /* __ASSEMBLY__ */
#endif /* _ASM_PGTABLE_3LEVEL_H */
......@@ -65,7 +65,11 @@ extern struct processor {
* Set a possibly extended PTE. Non-extended PTEs should
* ignore 'ext'.
*/
#ifdef CONFIG_ARM_LPAE
void (*set_pte_ext)(pte_t *ptep, pte_t pte);
#else
void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
#endif
/* Suspend/resume */
unsigned int suspend_size;
......@@ -79,7 +83,11 @@ extern void cpu_proc_fin(void);
extern int cpu_do_idle(void);
extern void cpu_dcache_clean_area(void *, int);
extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
#ifdef CONFIG_ARM_LPAE
extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte);
#else
extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
#endif
extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
/* These three are private to arch/arm/kernel/suspend.c */
......@@ -107,6 +115,18 @@ extern void cpu_resume(void);
#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
#ifdef CONFIG_ARM_LPAE
#define cpu_get_pgd() \
({ \
unsigned long pg, pg2; \
__asm__("mrrc p15, 0, %0, %1, c2" \
: "=r" (pg), "=r" (pg2) \
: \
: "cc"); \
pg &= ~(PTRS_PER_PGD*sizeof(pgd_t)-1); \
(pgd_t *)phys_to_virt(pg); \
})
#else
#define cpu_get_pgd() \
({ \
unsigned long pg; \
......@@ -115,6 +135,7 @@ extern void cpu_resume(void);
pg &= ~0x3fff; \
(pgd_t *)phys_to_virt(pg); \
})
#endif
#endif
......
......@@ -64,7 +64,7 @@ void __check_kvm_seq(struct mm_struct *mm)
} while (seq != init_mm.context.kvm_seq);
}
#ifndef CONFIG_SMP
#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
/*
* Section support is unsafe on SMP - If you iounmap and ioremap a region,
* the other CPUs will not see this change until their next context switch.
......@@ -202,11 +202,13 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
unsigned long addr;
struct vm_struct * area;
#ifndef CONFIG_ARM_LPAE
/*
* High mappings must be supersection aligned
*/
if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
return NULL;
#endif
/*
* Don't allow RAM to be mapped - this causes problems with ARMv6+
......@@ -228,7 +230,7 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
return NULL;
addr = (unsigned long)area->addr;
#ifndef CONFIG_SMP
#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
if (DOMAIN_IO == 0 &&
(((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) ||
cpu_is_xsc3()) && pfn >= 0x100000 &&
......@@ -320,7 +322,7 @@ __arm_ioremap_exec(unsigned long phys_addr, size_t size, bool cached)
void __iounmap(volatile void __iomem *io_addr)
{
void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
#ifndef CONFIG_SMP
#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
struct vm_struct **p, *tmp;
/*
......
......@@ -10,6 +10,7 @@
#include <linux/mm.h>
#include <linux/gfp.h>
#include <linux/highmem.h>
#include <linux/slab.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
......@@ -17,6 +18,14 @@
#include "mm.h"
#ifdef CONFIG_ARM_LPAE
#define __pgd_alloc() kmalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL)
#define __pgd_free(pgd) kfree(pgd)
#else
#define __pgd_alloc() (pgd_t *)__get_free_pages(GFP_KERNEL, 2)
#define __pgd_free(pgd) free_pages((unsigned long)pgd, 2)
#endif
/*
* need to get a 16k page for level 1
*/
......@@ -27,7 +36,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
pmd_t *new_pmd, *init_pmd;
pte_t *new_pte, *init_pte;
new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2);
new_pgd = __pgd_alloc();
if (!new_pgd)
goto no_pgd;
......@@ -42,10 +51,25 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
#ifdef CONFIG_ARM_LPAE
/*
* Allocate PMD table for modules and pkmap mappings.
*/
new_pud = pud_alloc(mm, new_pgd + pgd_index(MODULES_VADDR),
MODULES_VADDR);
if (!new_pud)
goto no_pud;
new_pmd = pmd_alloc(mm, new_pud, 0);
if (!new_pmd)
goto no_pmd;
#endif
if (!vectors_high()) {
/*
* On ARM, first page must always be allocated since it
* contains the machine vectors.
* contains the machine vectors. The vectors are always high
* with LPAE.
*/
new_pud = pud_alloc(mm, new_pgd, 0);
if (!new_pud)
......@@ -74,7 +98,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
no_pmd:
pud_free(mm, new_pud);
no_pud:
free_pages((unsigned long)new_pgd, 2);
__pgd_free(new_pgd);
no_pgd:
return NULL;
}
......@@ -111,5 +135,24 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd_base)
pgd_clear(pgd);
pud_free(mm, pud);
no_pgd:
free_pages((unsigned long) pgd_base, 2);
#ifdef CONFIG_ARM_LPAE
/*
* Free modules/pkmap or identity pmd tables.
*/
for (pgd = pgd_base; pgd < pgd_base + PTRS_PER_PGD; pgd++) {
if (pgd_none_or_clear_bad(pgd))
continue;
if (pgd_val(*pgd) & L_PGD_SWAPPER)
continue;
pud = pud_offset(pgd, 0);
if (pud_none_or_clear_bad(pud))
continue;
pmd = pmd_offset(pud, 0);
pud_clear(pud);
pmd_free(mm, pmd);
pgd_clear(pgd);
pud_free(mm, pud);
}
#endif
__pgd_free(pgd_base);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment