Commit da065a0b authored by Eric Miao's avatar Eric Miao

[ARM] pxa: move GPIO register definitions into <mach/gpio.h>

This makes gpio.c fully independent of pxa-regs.h (except for the
virtual address of the registers).
Signed-off-by: default avatarMike Rapoport <mike@compulab.co.il>
Signed-off-by: default avatarEric Miao <eric.miao@marvell.com>
parent 0d9f768f
......@@ -26,8 +26,8 @@
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <mach/pxa-regs.h>
#include <mach/reset.h>
#include <mach/gpio.h>
#include <mach/pxa2xx-gpio.h>
#include "generic.h"
......
......@@ -18,16 +18,12 @@
#include <linux/sysdev.h>
#include <linux/io.h>
#include <asm/gpio.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/gpio.h>
#include "generic.h"
#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
#define GPIO0_BASE (GPIO_REGS_VIRT + 0x0000)
#define GPIO1_BASE (GPIO_REGS_VIRT + 0x0004)
#define GPIO2_BASE (GPIO_REGS_VIRT + 0x0008)
#define GPIO3_BASE (GPIO_REGS_VIRT + 0x0100)
#define GPLR_OFFSET 0x00
#define GPDR_OFFSET 0x0C
......
......@@ -24,12 +24,80 @@
#ifndef __ASM_ARCH_PXA_GPIO_H
#define __ASM_ARCH_PXA_GPIO_H
#include <mach/pxa-regs.h>
#include <asm/irq.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <asm-generic/gpio.h>
#define GPIO_REGS_VIRT io_p2v(0x40E00000)
#define BANK_OFF(n) (((n) > 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
/* GPIO Pin Level Registers */
#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
/* GPIO Pin Direction Registers */
#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
/* GPIO Pin Output Set Registers */
#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
/* GPIO Pin Output Clear Registers */
#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
/* GPIO Rising Edge Detect Registers */
#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
/* GPIO Falling Edge Detect Registers */
#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
/* GPIO Edge Detect Status Registers */
#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
/* GPIO Alternate Function Select Registers */
#define GAFR0_L GPIO_REG(0x0054)
#define GAFR0_U GPIO_REG(0x0058)
#define GAFR1_L GPIO_REG(0x005C)
#define GAFR1_U GPIO_REG(0x0060)
#define GAFR2_L GPIO_REG(0x0064)
#define GAFR2_U GPIO_REG(0x0068)
#define GAFR3_L GPIO_REG(0x006C)
#define GAFR3_U GPIO_REG(0x0070)
/* More handy macros. The argument is a literal GPIO number. */
#define GPIO_bit(x) (1 << ((x) & 0x1f))
#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
* Those cases currently cause holes in the GPIO number space.
......
......@@ -129,76 +129,4 @@
#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
/*
* General Purpose I/O
*/
#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */
#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */
#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */
#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */
#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */
#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */
#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */
#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */
#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */
#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */
#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */
#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */
#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */
#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */
#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */
#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */
#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */
#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */
#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */
#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */
#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */
#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */
#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */
#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */
#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */
#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */
#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */
#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */
#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */
#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */
#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */
#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */
#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */
/* More handy macros. The argument is a literal GPIO number. */
#define GPIO_bit(x) (1 << ((x) & 0x1f))
#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
#endif
......@@ -3,6 +3,8 @@
#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
#include <mach/gpio.h>
/* GPIO alternate function assignments */
#define GPIO1_RST 1 /* reset */
......
......@@ -39,6 +39,7 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
#include <mach/gpio.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
......
......@@ -42,6 +42,7 @@
#include <asm/hardware/sa1111.h>
#include <mach/pxa25x.h>
#include <mach/gpio.h>
#include <mach/audio.h>
#include <mach/lubbock.h>
#include <mach/udc.h>
......
......@@ -42,6 +42,7 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
#include <mach/gpio.h>
#include <mach/mainstone.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
......
......@@ -18,8 +18,7 @@
#include <linux/init.h>
#include <linux/sysdev.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/gpio.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa2xx.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment