ASoC: Allow source specification for CODEC level sysclk

Similarly to PLLs/FLLs some modern CODECs provide selectable system clock
sources. When the clock is the clock for a DAI we do not usually need to
identify which clock is being configured so can use clk_id for the source
clock but with CODEC wide system clocks we will need to specify both the
clock being configured and the source.

Add a source argument to the CODEC driver set_sysclk() operation to
reflect this. As this operation is not as widely used as the DAI
set_sysclk() operation the change is not very invasive. We probably
ought to go and make the same alternation for DAIs at some point.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

include/sound/soc.h

@@ -276,7 +276,7 @@ enum snd_soc_pcm_subclass {
 };
 
 int snd_soc_codec_set_sysclk(struct snd_soc_codec *codec, int clk_id,
-			     unsigned int freq, int dir);
+			     int source, unsigned int freq, int dir);
 int snd_soc_codec_set_pll(struct snd_soc_codec *codec, int pll_id, int source,
 			  unsigned int freq_in, unsigned int freq_out);
 
@@ -610,7 +610,7 @@ struct snd_soc_codec_driver {
 
 	/* codec wide operations */
 	int (*set_sysclk)(struct snd_soc_codec *codec,
-			  int clk_id, unsigned int freq, int dir);
+			  int clk_id, int source, unsigned int freq, int dir);
 	int (*set_pll)(struct snd_soc_codec *codec, int pll_id, int source,
 		unsigned int freq_in, unsigned int freq_out);
 

sound/soc/codecs/adav80x.c

@@ -523,7 +523,8 @@ static int adav80x_hw_params(struct snd_pcm_substream *substream,
 }
 
 static int adav80x_set_sysclk(struct snd_soc_codec *codec,
-		int clk_id, unsigned int freq, int dir)
+			      int clk_id, int source,
+			      unsigned int freq, int dir)
 {
 	struct adav80x *adav80x = snd_soc_codec_get_drvdata(codec);
 

sound/soc/codecs/wm9081.c

@@ -1120,8 +1120,8 @@ static int wm9081_digital_mute(struct snd_soc_dai *codec_dai, int mute)
 	return 0;
 }
 
-static int wm9081_set_sysclk(struct snd_soc_codec *codec,
-			     int clk_id, unsigned int freq, int dir)
+static int wm9081_set_sysclk(struct snd_soc_codec *codec, int clk_id,
+			     int source, unsigned int freq, int dir)
 {
 	struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
 

sound/soc/samsung/speyside.c

@@ -223,7 +223,7 @@ static int speyside_wm9081_init(struct snd_soc_dapm_context *dapm)
 	snd_soc_dapm_nc_pin(dapm, "LINEOUT");
 
 	/* At any time the WM9081 is active it will have this clock */
-	return snd_soc_codec_set_sysclk(dapm->codec, WM9081_SYSCLK_MCLK,
+	return snd_soc_codec_set_sysclk(dapm->codec, WM9081_SYSCLK_MCLK, 0,
 					48000 * 256, 0);
 }
 

sound/soc/soc-core.c

@@ -2670,7 +2670,7 @@ int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
 	if (dai->driver && dai->driver->ops->set_sysclk)
 		return dai->driver->ops->set_sysclk(dai, clk_id, freq, dir);
 	else if (dai->codec && dai->codec->driver->set_sysclk)
-		return dai->codec->driver->set_sysclk(dai->codec, clk_id,
+		return dai->codec->driver->set_sysclk(dai->codec, clk_id, 0,
 						      freq, dir);
 	else
 		return -EINVAL;
@@ -2681,16 +2681,18 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_sysclk);
  * snd_soc_codec_set_sysclk - configure CODEC system or master clock.
  * @codec: CODEC
  * @clk_id: DAI specific clock ID
+ * @source: Source for the clock
  * @freq: new clock frequency in Hz
  * @dir: new clock direction - input/output.
  *
  * Configures the CODEC master (MCLK) or system (SYSCLK) clocking.
  */
 int snd_soc_codec_set_sysclk(struct snd_soc_codec *codec, int clk_id,
-	unsigned int freq, int dir)
+			     int source, unsigned int freq, int dir)
 {
 	if (codec->driver->set_sysclk)
-		return codec->driver->set_sysclk(codec, clk_id, freq, dir);
+		return codec->driver->set_sysclk(codec, clk_id, source,
+						 freq, dir);
 	else
 		return -EINVAL;
 }