arm64: zynqmp: Move clock node to zynqmp-clk-ccf.dtsi

Using clock firmware driver is not the only one option how to configure
clock. In past fixed clocks were also used and that configuration is still
valid that's why move clock firmware node to the same file where zynqmp_clk
references are used.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/48bfd8cf0de4d10b9c4d745218595f28954f70d5.1623684253.git.michal.simek@xilinx.com

arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi

@@ -2,7 +2,7 @@
 /*
  * Clock specification for Xilinx ZynqMP
  *
- * (C) Copyright 2017 - 2019, Xilinx, Inc.
+ * (C) Copyright 2017 - 2021, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -40,6 +40,17 @@ aux_ref_clk: aux_ref_clk {
 	};
 };
 
+&zynqmp_firmware {
+	zynqmp_clk: clock-controller {
+		#clock-cells = <1>;
+		compatible = "xlnx,zynqmp-clk";
+		clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
+			 <&aux_ref_clk>, <&gt_crx_ref_clk>;
+		clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk",
+			      "aux_ref_clk", "gt_crx_ref_clk";
+	};
+};
+
 &can0 {
 	clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>;
 };

arch/arm64/boot/dts/xilinx/zynqmp.dtsi

@@ -156,21 +156,6 @@ zynqmp_power: zynqmp-power {
 				mbox-names = "tx", "rx";
 			};
 
-			zynqmp_clk: clock-controller {
-				#clock-cells = <1>;
-				compatible = "xlnx,zynqmp-clk";
-				clocks = <&pss_ref_clk>,
-					 <&video_clk>,
-					 <&pss_alt_ref_clk>,
-					 <&aux_ref_clk>,
-					 <&gt_crx_ref_clk>;
-				clock-names = "pss_ref_clk",
-					      "video_clk",
-					      "pss_alt_ref_clk",
-					      "aux_ref_clk",
-					      "gt_crx_ref_clk";
-			};
-
 			nvmem_firmware {
 				compatible = "xlnx,zynqmp-nvmem-fw";
 				#address-cells = <1>;