Commit da9d2f47 authored by Bryan Wu's avatar Bryan Wu Committed by Tomi Valkeinen

OMAP: DSS2: remove generic DPI panel driver duplicated panel drivers

Still keep sharp_ls_panel driver, because it contains blacklight control driver.
Signed-off-by: default avatarBryan Wu <bryan.wu@canonical.com>
Acked-by: default avatarArchit Taneja <archit@ti.com>
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@nokia.com>
parent 89747c91
...@@ -9,12 +9,6 @@ config PANEL_GENERIC_DPI ...@@ -9,12 +9,6 @@ config PANEL_GENERIC_DPI
Supports LCD Panel used in TI SDP3430 and EVM boards, Supports LCD Panel used in TI SDP3430 and EVM boards,
OMAP3517 EVM boards and CM-T35. OMAP3517 EVM boards and CM-T35.
config PANEL_GENERIC
tristate "Generic Panel"
help
Generic panel driver.
Used for DVI output for Beagle and OMAP3 SDP.
config PANEL_SHARP_LS037V7DW01 config PANEL_SHARP_LS037V7DW01
tristate "Sharp LS037V7DW01 LCD Panel" tristate "Sharp LS037V7DW01 LCD Panel"
depends on OMAP2_DSS depends on OMAP2_DSS
...@@ -22,12 +16,6 @@ config PANEL_SHARP_LS037V7DW01 ...@@ -22,12 +16,6 @@ config PANEL_SHARP_LS037V7DW01
help help
LCD Panel used in TI's SDP3430 and EVM boards LCD Panel used in TI's SDP3430 and EVM boards
config PANEL_SHARP_LQ043T1DG01
tristate "Sharp LQ043T1DG01 LCD Panel"
depends on OMAP2_DSS
help
LCD Panel used in TI's OMAP3517 EVM boards
config PANEL_NEC_NL8048HL11_01B config PANEL_NEC_NL8048HL11_01B
tristate "NEC NL8048HL11-01B Panel" tristate "NEC NL8048HL11-01B Panel"
depends on OMAP2_DSS depends on OMAP2_DSS
...@@ -41,12 +29,6 @@ config PANEL_TAAL ...@@ -41,12 +29,6 @@ config PANEL_TAAL
help help
Taal DSI command mode panel from TPO. Taal DSI command mode panel from TPO.
config PANEL_TOPPOLY_TDO35S
tristate "Toppoly TDO35S LCD Panel support"
depends on OMAP2_DSS
help
LCD Panel used in CM-T35
config PANEL_TPO_TD043MTEA1 config PANEL_TPO_TD043MTEA1
tristate "TPO TD043MTEA1 LCD Panel" tristate "TPO TD043MTEA1 LCD Panel"
depends on OMAP2_DSS && SPI depends on OMAP2_DSS && SPI
......
obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o
obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
obj-$(CONFIG_PANEL_TAAL) += panel-taal.o obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
/*
* Generic panel support
*
* Copyright (C) 2008 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <plat/display.h>
static struct omap_video_timings generic_panel_timings = {
/* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
.x_res = 640,
.y_res = 480,
.pixel_clock = 23500,
.hfp = 48,
.hsw = 32,
.hbp = 80,
.vfp = 3,
.vsw = 4,
.vbp = 7,
};
static int generic_panel_power_on(struct omap_dss_device *dssdev)
{
int r;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
if (dssdev->platform_enable) {
r = dssdev->platform_enable(dssdev);
if (r)
goto err1;
}
return 0;
err1:
omapdss_dpi_display_disable(dssdev);
err0:
return r;
}
static void generic_panel_power_off(struct omap_dss_device *dssdev)
{
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
omapdss_dpi_display_disable(dssdev);
}
static int generic_panel_probe(struct omap_dss_device *dssdev)
{
dssdev->panel.config = OMAP_DSS_LCD_TFT;
dssdev->panel.timings = generic_panel_timings;
return 0;
}
static void generic_panel_remove(struct omap_dss_device *dssdev)
{
}
static int generic_panel_enable(struct omap_dss_device *dssdev)
{
int r = 0;
r = generic_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void generic_panel_disable(struct omap_dss_device *dssdev)
{
generic_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int generic_panel_suspend(struct omap_dss_device *dssdev)
{
generic_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
return 0;
}
static int generic_panel_resume(struct omap_dss_device *dssdev)
{
int r = 0;
r = generic_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void generic_panel_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
dpi_set_timings(dssdev, timings);
}
static void generic_panel_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
*timings = dssdev->panel.timings;
}
static int generic_panel_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
return dpi_check_timings(dssdev, timings);
}
static struct omap_dss_driver generic_driver = {
.probe = generic_panel_probe,
.remove = generic_panel_remove,
.enable = generic_panel_enable,
.disable = generic_panel_disable,
.suspend = generic_panel_suspend,
.resume = generic_panel_resume,
.set_timings = generic_panel_set_timings,
.get_timings = generic_panel_get_timings,
.check_timings = generic_panel_check_timings,
.driver = {
.name = "generic_panel",
.owner = THIS_MODULE,
},
};
static int __init generic_panel_drv_init(void)
{
return omap_dss_register_driver(&generic_driver);
}
static void __exit generic_panel_drv_exit(void)
{
omap_dss_unregister_driver(&generic_driver);
}
module_init(generic_panel_drv_init);
module_exit(generic_panel_drv_exit);
MODULE_LICENSE("GPL");
/*
* LCD panel driver for Sharp LQ043T1DG01
*
* Copyright (C) 2009 Texas Instruments Inc
* Author: Vaibhav Hiremath <hvaibhav@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <plat/display.h>
static struct omap_video_timings sharp_lq_timings = {
.x_res = 480,
.y_res = 272,
.pixel_clock = 9000,
.hsw = 42,
.hfp = 3,
.hbp = 2,
.vsw = 11,
.vfp = 3,
.vbp = 2,
};
static int sharp_lq_panel_power_on(struct omap_dss_device *dssdev)
{
int r;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
/* wait couple of vsyncs until enabling the LCD */
msleep(50);
if (dssdev->platform_enable) {
r = dssdev->platform_enable(dssdev);
if (r)
goto err1;
}
return 0;
err1:
omapdss_dpi_display_disable(dssdev);
err0:
return r;
}
static void sharp_lq_panel_power_off(struct omap_dss_device *dssdev)
{
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
/* wait at least 5 vsyncs after disabling the LCD */
msleep(100);
omapdss_dpi_display_disable(dssdev);
}
static int sharp_lq_panel_probe(struct omap_dss_device *dssdev)
{
dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IEO;
dssdev->panel.acb = 0x0;
dssdev->panel.timings = sharp_lq_timings;
return 0;
}
static void sharp_lq_panel_remove(struct omap_dss_device *dssdev)
{
}
static int sharp_lq_panel_enable(struct omap_dss_device *dssdev)
{
int r = 0;
r = sharp_lq_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void sharp_lq_panel_disable(struct omap_dss_device *dssdev)
{
sharp_lq_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int sharp_lq_panel_suspend(struct omap_dss_device *dssdev)
{
sharp_lq_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
return 0;
}
static int sharp_lq_panel_resume(struct omap_dss_device *dssdev)
{
int r = 0;
r = sharp_lq_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static struct omap_dss_driver sharp_lq_driver = {
.probe = sharp_lq_panel_probe,
.remove = sharp_lq_panel_remove,
.enable = sharp_lq_panel_enable,
.disable = sharp_lq_panel_disable,
.suspend = sharp_lq_panel_suspend,
.resume = sharp_lq_panel_resume,
.driver = {
.name = "sharp_lq_panel",
.owner = THIS_MODULE,
},
};
static int __init sharp_lq_panel_drv_init(void)
{
return omap_dss_register_driver(&sharp_lq_driver);
}
static void __exit sharp_lq_panel_drv_exit(void)
{
omap_dss_unregister_driver(&sharp_lq_driver);
}
module_init(sharp_lq_panel_drv_init);
module_exit(sharp_lq_panel_drv_exit);
MODULE_LICENSE("GPL");
/*
* LCD panel driver for Toppoly TDO35S
*
* Copyright (C) 2009 CompuLab, Ltd.
* Author: Mike Rapoport <mike@compulab.co.il>
*
* Based on generic panel support
* Copyright (C) 2008 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <plat/display.h>
static struct omap_video_timings toppoly_tdo_panel_timings = {
/* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
.x_res = 480,
.y_res = 640,
.pixel_clock = 26000,
.hfp = 104,
.hsw = 8,
.hbp = 8,
.vfp = 4,
.vsw = 2,
.vbp = 2,
};
static int toppoly_tdo_panel_power_on(struct omap_dss_device *dssdev)
{
int r;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
if (dssdev->platform_enable) {
r = dssdev->platform_enable(dssdev);
if (r)
goto err1;
}
return 0;
err1:
omapdss_dpi_display_disable(dssdev);
err0:
return r;
}
static void toppoly_tdo_panel_power_off(struct omap_dss_device *dssdev)
{
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
omapdss_dpi_display_disable(dssdev);
}
static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev)
{
dssdev->panel.config = OMAP_DSS_LCD_TFT |
OMAP_DSS_LCD_IVS |
OMAP_DSS_LCD_IHS |
OMAP_DSS_LCD_IPC |
OMAP_DSS_LCD_ONOFF;
dssdev->panel.timings = toppoly_tdo_panel_timings;
return 0;
}
static void toppoly_tdo_panel_remove(struct omap_dss_device *dssdev)
{
}
static int toppoly_tdo_panel_enable(struct omap_dss_device *dssdev)
{
int r = 0;
r = toppoly_tdo_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void toppoly_tdo_panel_disable(struct omap_dss_device *dssdev)
{
toppoly_tdo_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int toppoly_tdo_panel_suspend(struct omap_dss_device *dssdev)
{
toppoly_tdo_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
return 0;
}
static int toppoly_tdo_panel_resume(struct omap_dss_device *dssdev)
{
int r = 0;
r = toppoly_tdo_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static struct omap_dss_driver generic_driver = {
.probe = toppoly_tdo_panel_probe,
.remove = toppoly_tdo_panel_remove,
.enable = toppoly_tdo_panel_enable,
.disable = toppoly_tdo_panel_disable,
.suspend = toppoly_tdo_panel_suspend,
.resume = toppoly_tdo_panel_resume,
.driver = {
.name = "toppoly_tdo35s_panel",
.owner = THIS_MODULE,
},
};
static int __init toppoly_tdo_panel_drv_init(void)
{
return omap_dss_register_driver(&generic_driver);
}
static void __exit toppoly_tdo_panel_drv_exit(void)
{
omap_dss_unregister_driver(&generic_driver);
}
module_init(toppoly_tdo_panel_drv_init);
module_exit(toppoly_tdo_panel_drv_exit);
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment