OMAP: DSS2: remove generic DPI panel driver duplicated panel drivers

Still keep sharp_ls_panel driver, because it contains blacklight control driver.
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>

drivers/video/omap2/displays/Kconfig

@@ -9,12 +9,6 @@ config PANEL_GENERIC_DPI
 	  Supports LCD Panel used in TI SDP3430 and EVM boards,
 	  OMAP3517 EVM boards and CM-T35.
 
-config PANEL_GENERIC
-        tristate "Generic Panel"
-        help
-	  Generic panel driver.
-	  Used for DVI output for Beagle and OMAP3 SDP.
-
 config PANEL_SHARP_LS037V7DW01
         tristate "Sharp LS037V7DW01 LCD Panel"
         depends on OMAP2_DSS
@@ -22,12 +16,6 @@ config PANEL_SHARP_LS037V7DW01
         help
           LCD Panel used in TI's SDP3430 and EVM boards
 
-config PANEL_SHARP_LQ043T1DG01
-        tristate "Sharp LQ043T1DG01 LCD Panel"
-        depends on OMAP2_DSS
-        help
-          LCD Panel used in TI's OMAP3517 EVM boards
-
 config PANEL_NEC_NL8048HL11_01B
 	tristate "NEC NL8048HL11-01B Panel"
 	depends on OMAP2_DSS
@@ -41,12 +29,6 @@ config PANEL_TAAL
         help
           Taal DSI command mode panel from TPO.
 
-config PANEL_TOPPOLY_TDO35S
-        tristate "Toppoly TDO35S LCD Panel support"
-        depends on OMAP2_DSS
-        help
-          LCD Panel used in CM-T35
-
 config PANEL_TPO_TD043MTEA1
         tristate "TPO TD043MTEA1 LCD Panel"
         depends on OMAP2_DSS && SPI

drivers/video/omap2/displays/Makefile

 obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o
-obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
 obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
-obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
 obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
 
 obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
-obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
 obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o

drivers/video/omap2/displays/panel-generic.c

-/*
- * Generic panel support
- *
- * Copyright (C) 2008 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-
-#include <plat/display.h>
-
-static struct omap_video_timings generic_panel_timings = {
-	/* 640 x 480 @ 60 Hz  Reduced blanking VESA CVT 0.31M3-R */
-	.x_res		= 640,
-	.y_res		= 480,
-	.pixel_clock	= 23500,
-	.hfp		= 48,
-	.hsw		= 32,
-	.hbp		= 80,
-	.vfp		= 3,
-	.vsw		= 4,
-	.vbp		= 7,
-};
-
-static int generic_panel_power_on(struct omap_dss_device *dssdev)
-{
-	int r;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return 0;
-
-	r = omapdss_dpi_display_enable(dssdev);
-	if (r)
-		goto err0;
-
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			goto err1;
-	}
-
-	return 0;
-err1:
-	omapdss_dpi_display_disable(dssdev);
-err0:
-	return r;
-}
-
-static void generic_panel_power_off(struct omap_dss_device *dssdev)
-{
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return;
-
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
-	omapdss_dpi_display_disable(dssdev);
-}
-
-static int generic_panel_probe(struct omap_dss_device *dssdev)
-{
-	dssdev->panel.config = OMAP_DSS_LCD_TFT;
-	dssdev->panel.timings = generic_panel_timings;
-
-	return 0;
-}
-
-static void generic_panel_remove(struct omap_dss_device *dssdev)
-{
-}
-
-static int generic_panel_enable(struct omap_dss_device *dssdev)
-{
-	int r = 0;
-
-	r = generic_panel_power_on(dssdev);
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void generic_panel_disable(struct omap_dss_device *dssdev)
-{
-	generic_panel_power_off(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static int generic_panel_suspend(struct omap_dss_device *dssdev)
-{
-	generic_panel_power_off(dssdev);
-	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
-	return 0;
-}
-
-static int generic_panel_resume(struct omap_dss_device *dssdev)
-{
-	int r = 0;
-
-	r = generic_panel_power_on(dssdev);
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void generic_panel_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	dpi_set_timings(dssdev, timings);
-}
-
-static void generic_panel_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	*timings = dssdev->panel.timings;
-}
-
-static int generic_panel_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	return dpi_check_timings(dssdev, timings);
-}
-
-static struct omap_dss_driver generic_driver = {
-	.probe		= generic_panel_probe,
-	.remove		= generic_panel_remove,
-
-	.enable		= generic_panel_enable,
-	.disable	= generic_panel_disable,
-	.suspend	= generic_panel_suspend,
-	.resume		= generic_panel_resume,
-
-	.set_timings	= generic_panel_set_timings,
-	.get_timings	= generic_panel_get_timings,
-	.check_timings	= generic_panel_check_timings,
-
-	.driver         = {
-		.name   = "generic_panel",
-		.owner  = THIS_MODULE,
-	},
-};
-
-static int __init generic_panel_drv_init(void)
-{
-	return omap_dss_register_driver(&generic_driver);
-}
-
-static void __exit generic_panel_drv_exit(void)
-{
-	omap_dss_unregister_driver(&generic_driver);
-}
-
-module_init(generic_panel_drv_init);
-module_exit(generic_panel_drv_exit);
-MODULE_LICENSE("GPL");

drivers/video/omap2/displays/panel-sharp-lq043t1dg01.c

-/*
- * LCD panel driver for Sharp LQ043T1DG01
- *
- * Copyright (C) 2009 Texas Instruments Inc
- * Author: Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/err.h>
-
-#include <plat/display.h>
-
-static struct omap_video_timings sharp_lq_timings = {
-	.x_res = 480,
-	.y_res = 272,
-
-	.pixel_clock	= 9000,
-
-	.hsw		= 42,
-	.hfp		= 3,
-	.hbp		= 2,
-
-	.vsw		= 11,
-	.vfp		= 3,
-	.vbp		= 2,
-};
-
-static int sharp_lq_panel_power_on(struct omap_dss_device *dssdev)
-{
-	int r;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return 0;
-
-	r = omapdss_dpi_display_enable(dssdev);
-	if (r)
-		goto err0;
-
-	/* wait couple of vsyncs until enabling the LCD */
-	msleep(50);
-
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			goto err1;
-	}
-
-	return 0;
-err1:
-	omapdss_dpi_display_disable(dssdev);
-err0:
-	return r;
-}
-
-static void sharp_lq_panel_power_off(struct omap_dss_device *dssdev)
-{
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return;
-
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
-	/* wait at least 5 vsyncs after disabling the LCD */
-	msleep(100);
-
-	omapdss_dpi_display_disable(dssdev);
-}
-
-static int sharp_lq_panel_probe(struct omap_dss_device *dssdev)
-{
-
-	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
-		OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IEO;
-	dssdev->panel.acb = 0x0;
-	dssdev->panel.timings = sharp_lq_timings;
-
-	return 0;
-}
-
-static void sharp_lq_panel_remove(struct omap_dss_device *dssdev)
-{
-}
-
-static int sharp_lq_panel_enable(struct omap_dss_device *dssdev)
-{
-	int r = 0;
-
-	r = sharp_lq_panel_power_on(dssdev);
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void sharp_lq_panel_disable(struct omap_dss_device *dssdev)
-{
-	sharp_lq_panel_power_off(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static int sharp_lq_panel_suspend(struct omap_dss_device *dssdev)
-{
-	sharp_lq_panel_power_off(dssdev);
-	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
-	return 0;
-}
-
-static int sharp_lq_panel_resume(struct omap_dss_device *dssdev)
-{
-	int r = 0;
-
-	r = sharp_lq_panel_power_on(dssdev);
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static struct omap_dss_driver sharp_lq_driver = {
-	.probe		= sharp_lq_panel_probe,
-	.remove		= sharp_lq_panel_remove,
-
-	.enable		= sharp_lq_panel_enable,
-	.disable	= sharp_lq_panel_disable,
-	.suspend	= sharp_lq_panel_suspend,
-	.resume		= sharp_lq_panel_resume,
-
-	.driver         = {
-		.name   = "sharp_lq_panel",
-		.owner  = THIS_MODULE,
-	},
-};
-
-static int __init sharp_lq_panel_drv_init(void)
-{
-	return omap_dss_register_driver(&sharp_lq_driver);
-}
-
-static void __exit sharp_lq_panel_drv_exit(void)
-{
-	omap_dss_unregister_driver(&sharp_lq_driver);
-}
-
-module_init(sharp_lq_panel_drv_init);
-module_exit(sharp_lq_panel_drv_exit);
-MODULE_LICENSE("GPL");

drivers/video/omap2/displays/panel-toppoly-tdo35s.c

-/*
- * LCD panel driver for Toppoly TDO35S
- *
- * Copyright (C) 2009 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Based on generic panel support
- * Copyright (C) 2008 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-
-#include <plat/display.h>
-
-static struct omap_video_timings toppoly_tdo_panel_timings = {
-	/* 640 x 480 @ 60 Hz  Reduced blanking VESA CVT 0.31M3-R */
-	.x_res		= 480,
-	.y_res		= 640,
-
-	.pixel_clock	= 26000,
-
-	.hfp		= 104,
-	.hsw		= 8,
-	.hbp		= 8,
-
-	.vfp		= 4,
-	.vsw		= 2,
-	.vbp		= 2,
-};
-
-static int toppoly_tdo_panel_power_on(struct omap_dss_device *dssdev)
-{
-	int r;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		return 0;
-
-	r = omapdss_dpi_display_enable(dssdev);
-	if (r)
-		goto err0;
-
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			goto err1;
-	}
-
-	return 0;
-err1:
-	omapdss_dpi_display_disable(dssdev);
-err0:
-	return r;
-}
-
-static void toppoly_tdo_panel_power_off(struct omap_dss_device *dssdev)
-{
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return;
-
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
-	omapdss_dpi_display_disable(dssdev);
-}
-
-static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev)
-{
-	dssdev->panel.config = OMAP_DSS_LCD_TFT |
-			       OMAP_DSS_LCD_IVS |
-			       OMAP_DSS_LCD_IHS |
-			       OMAP_DSS_LCD_IPC |
-			       OMAP_DSS_LCD_ONOFF;
-
-	dssdev->panel.timings = toppoly_tdo_panel_timings;
-
-	return 0;
-}
-
-static void toppoly_tdo_panel_remove(struct omap_dss_device *dssdev)
-{
-}
-
-static int toppoly_tdo_panel_enable(struct omap_dss_device *dssdev)
-{
-	int r = 0;
-
-	r = toppoly_tdo_panel_power_on(dssdev);
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void toppoly_tdo_panel_disable(struct omap_dss_device *dssdev)
-{
-	toppoly_tdo_panel_power_off(dssdev);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static int toppoly_tdo_panel_suspend(struct omap_dss_device *dssdev)
-{
-	toppoly_tdo_panel_power_off(dssdev);
-	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
-	return 0;
-}
-
-static int toppoly_tdo_panel_resume(struct omap_dss_device *dssdev)
-{
-	int r = 0;
-
-	r = toppoly_tdo_panel_power_on(dssdev);
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static struct omap_dss_driver generic_driver = {
-	.probe		= toppoly_tdo_panel_probe,
-	.remove		= toppoly_tdo_panel_remove,
-
-	.enable		= toppoly_tdo_panel_enable,
-	.disable	= toppoly_tdo_panel_disable,
-	.suspend	= toppoly_tdo_panel_suspend,
-	.resume		= toppoly_tdo_panel_resume,
-
-	.driver         = {
-		.name   = "toppoly_tdo35s_panel",
-		.owner  = THIS_MODULE,
-	},
-};
-
-static int __init toppoly_tdo_panel_drv_init(void)
-{
-	return omap_dss_register_driver(&generic_driver);
-}
-
-static void __exit toppoly_tdo_panel_drv_exit(void)
-{
-	omap_dss_unregister_driver(&generic_driver);
-}
-
-module_init(toppoly_tdo_panel_drv_init);
-module_exit(toppoly_tdo_panel_drv_exit);
-MODULE_LICENSE("GPL");