Commit dae84799 authored by Paulo Zanoni's avatar Paulo Zanoni Committed by Daniel Vetter

drm/i915: add intel_ddi_set_pipe_settings

In theory, all the DDI pipe settings should be set here, including
timing and M/N registers. For now, let's just set the DP MSA
attributes.
Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: fixed up the unused typo in a #define, spotted by Jani
Nikula.]
Reviewed-by: default avatarJani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 7739c33b
......@@ -4542,6 +4542,16 @@
#define PIPE_CLK_SEL_DISABLED (0x0<<29)
#define PIPE_CLK_SEL_PORT(x) ((x+1)<<29)
#define _PIPEA_MSA_MISC 0x60410
#define _PIPEB_MSA_MISC 0x61410
#define PIPE_MSA_MISC(pipe) _PIPE(pipe, _PIPEA_MSA_MISC, _PIPEB_MSA_MISC)
#define PIPE_MSA_SYNC_CLK (1<<0)
#define PIPE_MSA_6_BPC (0<<5)
#define PIPE_MSA_8_BPC (1<<5)
#define PIPE_MSA_10_BPC (2<<5)
#define PIPE_MSA_12_BPC (3<<5)
#define PIPE_MSA_16_BPC (4<<5)
/* LCPLL Control */
#define LCPLL_CTL 0x130040
#define LCPLL_PLL_DISABLE (1<<31)
......
......@@ -827,6 +827,40 @@ bool intel_ddi_pll_mode_set(struct drm_crtc *crtc, int clock)
return true;
}
void intel_ddi_set_pipe_settings(struct drm_crtc *crtc)
{
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
enum pipe pipe = intel_crtc->pipe;
int type = intel_encoder->type;
uint32_t temp;
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
temp = PIPE_MSA_SYNC_CLK;
switch (intel_crtc->bpp) {
case 18:
temp |= PIPE_MSA_6_BPC;
break;
case 24:
temp |= PIPE_MSA_8_BPC;
break;
case 30:
temp |= PIPE_MSA_10_BPC;
break;
case 36:
temp |= PIPE_MSA_12_BPC;
break;
default:
temp |= PIPE_MSA_8_BPC;
WARN(1, "%d bpp unsupported by pipe DDI function\n",
intel_crtc->bpp);
}
I915_WRITE(PIPE_MSA_MISC(pipe), temp);
}
}
void intel_ddi_enable_pipe_func(struct drm_crtc *crtc)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
......
......@@ -3218,8 +3218,10 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
*/
intel_crtc_load_lut(crtc);
if (IS_HASWELL(dev))
if (IS_HASWELL(dev)) {
intel_ddi_set_pipe_settings(crtc);
intel_ddi_enable_pipe_func(crtc);
}
intel_enable_pipe(dev_priv, pipe, is_pch_port);
intel_enable_plane(dev_priv, plane, pipe);
......
......@@ -597,5 +597,6 @@ extern bool intel_ddi_pll_mode_set(struct drm_crtc *crtc, int clock);
extern void intel_ddi_pre_enable(struct intel_encoder *intel_encoder);
extern void intel_ddi_post_disable(struct intel_encoder *intel_encoder);
extern void intel_ddi_put_crtc_pll(struct drm_crtc *crtc);
extern void intel_ddi_set_pipe_settings(struct drm_crtc *crtc);
#endif /* __INTEL_DRV_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment