Merge tag 'dt-3.10-4' of git://git.infradead.org/users/jcooper/linux into next/dt2

From Jason Cooper:
mvebu dt for v3.10 round 4

 - mvebu LPAE 64bit dts file changes

* tag 'dt-3.10-4' of git://git.infradead.org/users/jcooper/linux: (52 commits)
  ARM: dts: mvebu: Convert mvebu device tree files to 64 bits
  ARM: dts: mvebu: introduce internal-regs node
  ARM: dts: mvebu: Convert all the mvebu files to use the range property
  ARM: dts: mvebu: move all peripherals inside soc
  ARM: dts: mvebu: fix cpus section indentation
  arm: mvebu: PCIe Device Tree informations for Armada XP GP
  arm: mvebu: PCIe Device Tree informations for Armada 370 DB
  arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox
  arm: mvebu: PCIe Device Tree informations for Armada XP DB
  arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4
  arm: mvebu: add PCIe Device Tree informations for Armada XP
  arm: mvebu: add PCIe Device Tree informations for Armada 370
  ARM: mvebu: Align the internal registers virtual base to support LPAE
  ARM: mvebu: Limit the DMA zone when LPAE is selected
  arm: plat-orion: remove addr-map code
  arm: mach-mv78xx0: convert to use the mvebu-mbus driver
  arm: mach-orion5x: convert to use mvebu-mbus driver
  arm: mach-dove: convert to use mvebu-mbus driver
  arm: mach-kirkwood: convert to use mvebu-mbus driver
  arm: mach-mvebu: convert to use mvebu-mbus driver
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/Kconfig

@@ -564,6 +564,7 @@ config ARCH_DOVE
 	select PINCTRL_DOVE
 	select PLAT_ORION_LEGACY
 	select USB_ARCH_HAS_EHCI
+	select MVEBU_MBUS
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
@@ -577,6 +578,7 @@ config ARCH_KIRKWOOD
 	select PINCTRL
 	select PINCTRL_KIRKWOOD
 	select PLAT_ORION_LEGACY
+	select MVEBU_MBUS
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
@@ -588,6 +590,7 @@ config ARCH_MV78XX0
 	select GENERIC_CLOCKEVENTS
 	select PCI
 	select PLAT_ORION_LEGACY
+	select MVEBU_MBUS
 	help
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
@@ -600,6 +603,7 @@ config ARCH_ORION5X
 	select GENERIC_CLOCKEVENTS
 	select PCI
 	select PLAT_ORION_LEGACY
+	select MVEBU_MBUS
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),

arch/arm/boot/dts/armada-370-db.dts

@@ -30,68 +30,87 @@ memory {
 	};
 
 	soc {
-		serial@d0012000 {
-			clock-frequency = <200000000>;
-			status = "okay";
-		};
-		sata@d00a0000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
 
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
 			};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
 			};
-		};
 
-		ethernet@d0070000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0074000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "rgmii-id";
-		};
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				/*
+				 * This device is disabled by default, because
+				 * using the SD card connector requires
+				 * changing the default CON40 connector
+				 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
+				 * different connector
+				 * "DB-88F6710_MPP_RGMII_SD_Jumper".
+				 */
+				status = "disabled";
+				/* No CD or WP GPIOs */
+			};
 
-		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins1>;
-			pinctrl-names = "default";
-			/*
-			 * This device is disabled by default, because
-			 * using the SD card connector requires
-			 * changing the default CON40 connector
-			 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
-			 * different connector
-			 * "DB-88F6710_MPP_RGMII_SD_Jumper".
-			 */
-			status = "disabled";
-			/* No CD or WP GPIOs */
-		};
+			usb@50000 {
+				status = "okay";
+			};
 
-		usb@d0050000 {
-			status = "okay";
-		};
+			usb@51000 {
+				status = "okay";
+			};
 
-		usb@d0051000 {
-			status = "okay";
-		};
+			spi0: spi@10600 {
+				status = "okay";
 
-		spi0: spi@d0010600 {
-			status = "okay";
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "mx25l25635e";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <50000000>;
+				};
+			};
 
-			spi-flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mx25l25635e";
-				reg = <0>; /* Chip select 0 */
-				spi-max-frequency = <50000000>;
+			pcie-controller {
+				status = "okay";
+				/*
+				 * The two PCIe units are accessible through
+				 * both standard PCIe slots and mini-PCIe
+				 * slots on the board.
+				 */
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+				pcie@2,0 {
+					/* Port 1, Lane 0 */
+					status = "okay";
+				};
 			};
 		};
 	};

arch/arm/boot/dts/armada-370-mirabox.dts

@@ -25,50 +25,116 @@ memory {
 	};
 
 	soc {
-		serial@d0012000 {
-			clock-frequency = <200000000>;
-			status = "okay";
-		};
-		timer@d0020300 {
-			clock-frequency = <600000000>;
-			status = "okay";
-		};
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
 			};
+			timer@20300 {
+				clock-frequency = <600000000>;
+				status = "okay";
+			};
+
+			pinctrl {
+				pwr_led_pin: pwr-led-pin {
+					marvell,pins = "mpp63";
+					marvell,function = "gpo";
+				};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
+				stat_led_pins: stat-led-pins {
+					marvell,pins = "mpp64", "mpp65";
+					marvell,function = "gpio";
+				};
 			};
-		};
-		ethernet@d0070000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0074000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "rgmii-id";
-		};
 
-		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins2>;
-			pinctrl-names = "default";
-			status = "okay";
-			/*
-			 * No CD or WP GPIOs: SDIO interface used for
-			 * Wifi/Bluetooth chip
-			 */
-		};
+			gpio_leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
 
-		usb@d0050000 {
-			status = "okay";
-		};
+				green_pwr_led {
+					label = "mirabox:green:pwr";
+					gpios = <&gpio1 31 1>;
+					linux,default-trigger = "heartbeat";
+				};
+
+				blue_stat_led {
+					label = "mirabox:blue:stat";
+					gpios = <&gpio2 0 1>;
+					linux,default-trigger = "cpu0";
+				};
+
+				green_stat_led {
+					label = "mirabox:green:stat";
+					gpios = <&gpio2 1 1>;
+					default-state = "off";
+				};
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins3>;
+				pinctrl-names = "default";
+				status = "okay";
+				/*
+				 * No CD or WP GPIOs: SDIO interface used for
+				 * Wifi/Bluetooth chip
+				 */
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
 
-		usb@d0051000 {
-			status = "okay";
+			usb@51000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pca9505: pca9505@25 {
+					compatible = "nxp,pca9505";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x25>;
+				};
+			};
+
+			pcie-controller {
+				status = "okay";
+
+				/* Internal mini-PCIe connector */
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+
+				/* Connected on the PCB to a USB 3.0 XHCI controller */
+				pcie@2,0 {
+					/* Port 1, Lane 0 */
+					status = "okay";
+				};
+			};
 		};
 	};
 };

arch/arm/boot/dts/armada-370-rd.dts

@@ -28,49 +28,62 @@ memory {
 	};
 
 	soc {
-		serial@d0012000 {
-			clock-frequency = <200000000>;
-			status = "okay";
-		};
-		sata@d00a0000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
 
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
 			};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
 			};
-		};
 
-		ethernet@d0070000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "sgmii";
-		};
-		ethernet@d0074000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "rgmii-id";
-		};
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				status = "okay";
+				/* No CD or WP GPIOs */
+			};
 
-		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins1>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-		};
+			usb@50000 {
+				status = "okay";
+			};
 
-		usb@d0050000 {
-			status = "okay";
-		};
+			usb@51000 {
+				status = "okay";
+			};
 
-		usb@d0051000 {
-			status = "okay";
+			gpio-keys {
+				compatible = "gpio-keys";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				button@1 {
+					label = "Software Button";
+					linux,code = <116>;
+					gpios = <&gpio0 6 1>;
+				};
+			};
 		};
 	};
-};
+ };

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -16,7 +16,7 @@
  * 370 and Armada XP SoC.
  */
 
-/include/ "skeleton.dtsi"
+/include/ "skeleton64.dtsi"
 
 / {
 	model = "Marvell Armada 370 and XP SoC";
@@ -28,159 +28,203 @@ cpu@0 {
 		};
 	};
 
-	mpic: interrupt-controller@d0020000 {
-	      compatible = "marvell,mpic";
-	      #interrupt-cells = <1>;
-	      #size-cells = <1>;
-	      interrupt-controller;
-	};
-
-	coherency-fabric@d0020200 {
-		compatible = "marvell,coherency-fabric";
-		reg = <0xd0020200 0xb0>,
-		      <0xd0021810 0x1c>;
-	};
-
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&mpic>;
-		ranges;
+		ranges = <0 0 0xd0000000 0x100000>;
 
-		serial@d0012000 {
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mpic: interrupt-controller@20000 {
+				compatible = "marvell,mpic";
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+			};
+
+			coherency-fabric@20200 {
+				compatible = "marvell,coherency-fabric";
+				reg = <0x20200 0xb0>, <0x21810 0x1c>;
+			};
+
+			serial@12000 {
 				compatible = "snps,dw-apb-uart";
-				reg = <0xd0012000 0x100>;
+				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <41>;
 				reg-io-width = <1>;
 				status = "disabled";
-		};
-		serial@d0012100 {
+			};
+			serial@12100 {
 				compatible = "snps,dw-apb-uart";
-				reg = <0xd0012100 0x100>;
+				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <42>;
 				reg-io-width = <1>;
 				status = "disabled";
-		};
-
-		timer@d0020300 {
-			       compatible = "marvell,armada-370-xp-timer";
-			       reg = <0xd0020300 0x30>,
-			       <0xd0021040 0x30>;
-			       interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
-			       clocks = <&coreclk 2>;
-		};
-
-		addr-decoding@d0020000 {
-			compatible = "marvell,armada-addr-decoding-controller";
-			reg = <0xd0020000 0x258>;
-		};
-
-		sata@d00a0000 {
-			compatible = "marvell,orion-sata";
-			reg = <0xd00a0000 0x2400>;
-			interrupts = <55>;
-			clocks = <&gateclk 15>, <&gateclk 30>;
-			clock-names = "0", "1";
-			status = "disabled";
-		};
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-370-xp-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
+				clocks = <&coreclk 2>;
+			};
+
+			sata@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x2400>;
+				interrupts = <55>;
+				clocks = <&gateclk 15>, <&gateclk 30>;
+				clock-names = "0", "1";
+				status = "disabled";
+			};
 
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "marvell,orion-mdio";
-			reg = <0xd0072004 0x4>;
-		};
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+			};
 
-		ethernet@d0070000 {
+			ethernet@70000 {
 				compatible = "marvell,armada-370-neta";
-				reg = <0xd0070000 0x2500>;
+				reg = <0x70000 0x2500>;
 				interrupts = <8>;
 				clocks = <&gateclk 4>;
 				status = "disabled";
-		};
+			};
 
-		ethernet@d0074000 {
+			ethernet@74000 {
 				compatible = "marvell,armada-370-neta";
-				reg = <0xd0074000 0x2500>;
+				reg = <0x74000 0x2500>;
 				interrupts = <10>;
 				clocks = <&gateclk 3>;
 				status = "disabled";
-		};
-
-		i2c0: i2c@d0011000 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0xd0011000 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <31>;
-			timeout-ms = <1000>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@d0011100 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0xd0011100 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <32>;
-			timeout-ms = <1000>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		rtc@10300 {
-			compatible = "marvell,orion-rtc";
-			reg = <0xd0010300 0x20>;
-			interrupts = <50>;
-		};
-
-		mvsdio@d00d4000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0xd00d4000 0x200>;
-			interrupts = <54>;
-			clocks = <&gateclk 17>;
-			status = "disabled";
-		};
-
-		usb@d0050000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0xd0050000 0x500>;
-			interrupts = <45>;
-			status = "disabled";
-		};
-
-		usb@d0051000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0xd0051000 0x500>;
-			interrupts = <46>;
-			status = "disabled";
-		};
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <31>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <32>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			rtc@10300 {
+				compatible = "marvell,orion-rtc";
+				reg = <0x10300 0x20>;
+				interrupts = <50>;
+			};
+
+			mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <54>;
+				clocks = <&gateclk 17>;
+				status = "disabled";
+			};
 
-		spi0: spi@d0010600 {
-			compatible = "marvell,orion-spi";
-			reg = <0xd0010600 0x28>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			interrupts = <30>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
+			usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <45>;
+				status = "disabled";
+			};
 
-		spi1: spi@d0010680 {
-			compatible = "marvell,orion-spi";
-			reg = <0xd0010680 0x28>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			interrupts = <92>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
+			usb@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x500>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10600 0x28>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <30>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10680 0x28>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <92>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			devbus-bootcs@10400 {
+				compatible = "marvell,mvebu-devbus";
+				reg = <0x10400 0x8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			devbus-cs0@10408 {
+				compatible = "marvell,mvebu-devbus";
+				reg = <0x10408 0x8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			devbus-cs1@10410 {
+				compatible = "marvell,mvebu-devbus";
+				reg = <0x10410 0x8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			devbus-cs2@10418 {
+				compatible = "marvell,mvebu-devbus";
+				reg = <0x10418 0x8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			devbus-cs3@10420 {
+				compatible = "marvell,mvebu-devbus";
+				reg = <0x10420 0x8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
 		};
 	};
-};
-
+ };

arch/arm/boot/dts/armada-370.dtsi

@@ -16,16 +16,11 @@
  */
 
 /include/ "armada-370-xp.dtsi"
+/include/ "skeleton.dtsi"
 
 / {
 	model = "Marvell Armada 370 family SoC";
 	compatible = "marvell,armada370", "marvell,armada-370-xp";
-	L2: l2-cache {
-		compatible = "marvell,aurora-outer-cache";
-		reg = <0xd0008000 0x1000>;
-		cache-id-part = <0x100>;
-		wt-override;
-	};
 
 	aliases {
 		gpio0 = &gpio0;
@@ -33,125 +28,198 @@ aliases {
 		gpio2 = &gpio2;
 	};
 
-	mpic: interrupt-controller@d0020000 {
-	      reg = <0xd0020a00 0x1d0>,
-		    <0xd0021870 0x58>;
-	};
-
 	soc {
-		system-controller@d0018200 {
+		ranges = <0 0xd0000000 0x100000>;
+		internal-regs {
+			system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0xd0018200 0x100>;
-		};
-
-		pinctrl {
-			compatible = "marvell,mv88f6710-pinctrl";
-			reg = <0xd0018000 0x38>;
+				reg = <0x18200 0x100>;
+			};
 
-			sdio_pins1: sdio-pins1 {
-			      marvell,pins = "mpp9",  "mpp11", "mpp12",
-					     "mpp13", "mpp14", "mpp15";
-			      marvell,function = "sd0";
+			L2: l2-cache {
+				compatible = "marvell,aurora-outer-cache";
+				reg = <0xd0008000 0x1000>;
+				cache-id-part = <0x100>;
+				wt-override;
 			};
 
-			sdio_pins2: sdio-pins2 {
-			      marvell,pins = "mpp47", "mpp48", "mpp49",
-					     "mpp50", "mpp51", "mpp52";
-			      marvell,function = "sd0";
+			mpic: interrupt-controller@20000 {
+				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
 			};
-	        };
-
-		gpio0: gpio@d0018100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
-		};
 
-		gpio1: gpio@d0018140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>, <90>;
-		};
+			pinctrl {
+				compatible = "marvell,mv88f6710-pinctrl";
+				reg = <0x18000 0x38>;
+
+				sdio_pins1: sdio-pins1 {
+					marvell,pins = "mpp9",  "mpp11", "mpp12",
+							"mpp13", "mpp14", "mpp15";
+					marvell,function = "sd0";
+				};
+
+				sdio_pins2: sdio-pins2 {
+					marvell,pins = "mpp47", "mpp48", "mpp49",
+							"mpp50", "mpp51", "mpp52";
+					marvell,function = "sd0";
+				};
+
+				sdio_pins3: sdio-pins3 {
+					marvell,pins = "mpp48", "mpp49", "mpp50",
+							"mpp51", "mpp52", "mpp53";
+					marvell,function = "sd0";
+				};
+			};
 
-		gpio2: gpio@d0018180 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018180 0x40>;
-			ngpios = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <91>;
-		};
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
 
-		coreclk: mvebu-sar@d0018230 {
-			compatible = "marvell,armada-370-core-clock";
-			reg = <0xd0018230 0x08>;
-			#clock-cells = <1>;
-		};
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+			};
 
-		gateclk: clock-gating-control@d0018220 {
-			compatible = "marvell,armada-370-gating-clock";
-			reg = <0xd0018220 0x4>;
-			clocks = <&coreclk 0>;
-			#clock-cells = <1>;
-		};
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <91>;
+			};
 
-		xor@d0060800 {
-			compatible = "marvell,orion-xor";
-			reg = <0xd0060800 0x100
-			       0xd0060A00 0x100>;
-			status = "okay";
+			coreclk: mvebu-sar@18230 {
+				compatible = "marvell,armada-370-core-clock";
+				reg = <0x18230 0x08>;
+				#clock-cells = <1>;
+			};
 
-			xor00 {
-				interrupts = <51>;
-				dmacap,memcpy;
-				dmacap,xor;
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-370-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
 			};
-			xor01 {
-				interrupts = <52>;
-				dmacap,memcpy;
-				dmacap,xor;
-				dmacap,memset;
+
+			xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60A00 0x100>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
 			};
-		};
 
-		xor@d0060900 {
-			compatible = "marvell,orion-xor";
-			reg = <0xd0060900 0x100
-			       0xd0060b00 0x100>;
-			status = "okay";
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
 
-			xor10 {
-				interrupts = <94>;
-				dmacap,memcpy;
-				dmacap,xor;
+			usb@50000 {
+				clocks = <&coreclk 0>;
 			};
-			xor11 {
-				interrupts = <95>;
-				dmacap,memcpy;
-				dmacap,xor;
-				dmacap,memset;
+
+			usb@51000 {
+				clocks = <&coreclk 0>;
 			};
-		};
 
-		usb@d0050000 {
-			clocks = <&coreclk 0>;
-		};
+			thermal@18300 {
+				compatible = "marvell,armada370-thermal";
+				reg = <0x18300 0x4
+					0x18304 0x4>;
+				status = "okay";
+			};
 
-		usb@d0051000 {
-			clocks = <&coreclk 0>;
+			pcie-controller {
+				compatible = "marvell,armada-370-pcie";
+				status = "disabled";
+				device_type = "pci";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				bus-range = <0x00 0xff>;
+
+				reg = <0x40000 0x2000>, <0x80000 0x2000>;
+
+				reg-names = "pcie0.0", "pcie1.0";
+
+				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
+					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+					0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
+
+				pcie@1,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+					reg = <0x0800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 58>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 5>;
+					status = "disabled";
+				};
+
+				pcie@2,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+					reg = <0x1000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 62>;
+					marvell,pcie-port = <1>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 9>;
+					status = "disabled";
+				};
+			};
 		};
-
 	};
 };

arch/arm/boot/dts/armada-xp-db.dts

@@ -26,99 +26,134 @@ chosen {
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2 GB */
+		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
 	};
 
 	soc {
-		serial@d0012000 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012100 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012200 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012300 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-
-		sata@d00a0000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
-
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12200 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12300 {
+				clock-frequency = <250000000>;
+				status = "okay";
 			};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
 			};
 
-			phy2: ethernet-phy@2 {
-				reg = <25>;
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <25>;
+				};
+
+				phy3: ethernet-phy@3 {
+					reg = <27>;
+				};
 			};
 
-			phy3: ethernet-phy@3 {
-				reg = <27>;
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "sgmii";
 			};
-		};
 
-		ethernet@d0070000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0074000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0030000 {
-			status = "okay";
-			phy = <&phy2>;
-			phy-mode = "sgmii";
-		};
-		ethernet@d0034000 {
-			status = "okay";
-			phy = <&phy3>;
-			phy-mode = "sgmii";
-		};
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				/* No CD or WP GPIOs */
+			};
 
-		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-		};
+			usb@50000 {
+				status = "okay";
+			};
 
-		usb@d0050000 {
-			status = "okay";
-		};
+			usb@51000 {
+				status = "okay";
+			};
 
-		usb@d0051000 {
-			status = "okay";
-		};
+			usb@52000 {
+				status = "okay";
+			};
 
-		usb@d0052000 {
-			status = "okay";
-		};
+			spi0: spi@10600 {
+				status = "okay";
 
-		spi0: spi@d0010600 {
-			status = "okay";
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "m25p64";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <20000000>;
+				};
+			};
 
-			spi-flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p64";
-				reg = <0>; /* Chip select 0 */
-				spi-max-frequency = <20000000>;
+			pcie-controller {
+				status = "okay";
+
+				/*
+				 * All 6 slots are physically present as
+				 * standard PCIe slots on the board.
+				 */
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+				pcie@2,0 {
+					/* Port 0, Lane 1 */
+					status = "okay";
+				};
+				pcie@3,0 {
+					/* Port 0, Lane 2 */
+					status = "okay";
+				};
+				pcie@4,0 {
+					/* Port 0, Lane 3 */
+					status = "okay";
+				};
+				pcie@9,0 {
+					/* Port 2, Lane 0 */
+					status = "okay";
+				};
+				pcie@10,0 {
+					/* Port 3, Lane 0 */
+					status = "okay";
+				};
 			};
 		};
 	};

arch/arm/boot/dts/armada-xp-gp.dts

@@ -26,87 +26,141 @@ chosen {
 
 	memory {
 		device_type = "memory";
-
 		/*
-		 * 4 GB of plug-in RAM modules by default but only 3GB
-		 * are visible, the amount of memory available can be
-		 * changed by the bootloader according the size of the
-		 * module actually plugged
+                 * 8 GB of plug-in RAM modules by default.The amount
+                 * of memory available can be changed by the
+                 * bootloader according the size of the module
+                 * actually plugged. Only 7GB are usable because
+                 * addresses from 0xC0000000 to 0xffffffff are used by
+                 * the internal registers of the SoC.
 		 */
-		reg = <0x00000000 0xC0000000>;
+		reg = <0x00000000 0x00000000 0x00000000 0xC0000000>,
+		      <0x00000001 0x00000000 0x00000001 0x00000000>;
 	};
 
 	soc {
-		serial@d0012000 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012100 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012200 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012300 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-
-		sata@d00a0000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12200 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12300 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
 
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <16>;
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
 			};
 
-			phy1: ethernet-phy@1 {
-				reg = <17>;
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <16>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <17>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <18>;
+				};
+
+				phy3: ethernet-phy@3 {
+					reg = <19>;
+				};
 			};
 
-			phy2: ethernet-phy@2 {
-				reg = <18>;
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
 			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "rgmii-id";
+			};
+
+			spi0: spi@10600 {
+				status = "okay";
 
-			phy3: ethernet-phy@3 {
-				reg = <19>;
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
 			};
-		};
 
-		ethernet@d0070000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0074000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0030000 {
-			status = "okay";
-			phy = <&phy2>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0034000 {
-			status = "okay";
-			phy = <&phy3>;
-			phy-mode = "rgmii-id";
-		};
+			devbus-bootcs@10400 {
+				status = "okay";
+				ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */
+
+				/* Device Bus parameters are required */
+
+				/* Read parameters */
+				devbus,bus-width    = <8>;
+				devbus,turn-off-ps  = <60000>;
+				devbus,badr-skew-ps = <0>;
+				devbus,acc-first-ps = <124000>;
+				devbus,acc-next-ps  = <248000>;
+				devbus,rd-setup-ps  = <0>;
+				devbus,rd-hold-ps   = <0>;
+
+				/* Write parameters */
+				devbus,sync-enable = <0>;
+				devbus,wr-high-ps  = <60000>;
+				devbus,wr-low-ps   = <60000>;
+				devbus,ale-wr-ps   = <60000>;
+
+				/* NOR 16 MiB */
+				nor@0 {
+					compatible = "cfi-flash";
+					reg = <0 0x1000000>;
+					bank-width = <2>;
+				};
+			};
 
-		spi0: spi@d0010600 {
-			status = "okay";
+			pcie-controller {
+				status = "okay";
 
-			spi-flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "n25q128a13";
-				reg = <0>; /* Chip select 0 */
-				spi-max-frequency = <108000000>;
+				/*
+				 * The 3 slots are physically present as
+				 * standard PCIe slots on the board.
+				 */
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+				pcie@9,0 {
+					/* Port 2, Lane 0 */
+					status = "okay";
+				};
+				pcie@10,0 {
+					/* Port 3, Lane 0 */
+					status = "okay";
+				};
 			};
 		};
 	};

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -25,56 +25,162 @@ aliases {
 	};
 
 	cpus {
-	    #address-cells = <1>;
-	    #size-cells = <0>;
-
-	    cpu@0 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <0>;
-		clocks = <&cpuclk 0>;
-	    };
-
-	    cpu@1 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <1>;
-		clocks = <&cpuclk 1>;
-	    };
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+		};
 	};
 
 	soc {
-		pinctrl {
-			compatible = "marvell,mv78230-pinctrl";
-			reg = <0xd0018000 0x38>;
-
-			sdio_pins: sdio-pins {
-				marvell,pins = "mpp30", "mpp31", "mpp32",
-					       "mpp33", "mpp34", "mpp35";
-				marvell,function = "sd0";
+		internal-regs {
+			pinctrl {
+				compatible = "marvell,mv78230-pinctrl";
+				reg = <0x18000 0x38>;
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp30", "mpp31", "mpp32",
+						       "mpp33", "mpp34", "mpp35";
+					marvell,function = "sd0";
+				};
 			};
-		};
 
-		gpio0: gpio@d0018100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
-		};
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <87>, <88>, <89>;
+			};
 
-		gpio1: gpio@d0018140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
-			ngpios = <17>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>;
+			/*
+			 * MV78230 has 2 PCIe units Gen2.0: One unit can be
+			 * configured as x4 or quad x1 lanes. One unit is
+			 * x4/x1.
+			 */
+			pcie-controller {
+				compatible = "marvell,armada-xp-pcie";
+				status = "disabled";
+				device_type = "pci";
+
+#address-cells = <3>;
+#size-cells = <2>;
+
+				bus-range = <0x00 0xff>;
+
+				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
+					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
+					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
+					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
+					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
+
+				pcie@1,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+					reg = <0x0800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 58>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 5>;
+					status = "disabled";
+				};
+
+				pcie@2,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+					reg = <0x1000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 59>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <1>;
+					clocks = <&gateclk 6>;
+					status = "disabled";
+				};
+
+				pcie@3,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+					reg = <0x1800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 60>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <2>;
+					clocks = <&gateclk 7>;
+					status = "disabled";
+				};
+
+				pcie@4,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+					reg = <0x2000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 61>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <3>;
+					clocks = <&gateclk 8>;
+					status = "disabled";
+				};
+
+				pcie@9,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+					reg = <0x4800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 99>;
+					marvell,pcie-port = <2>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 26>;
+					status = "disabled";
+				};
+			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -26,75 +26,199 @@ aliases {
 	};
 
 	cpus {
-	    #address-cells = <1>;
-	    #size-cells = <0>;
-
-	    cpu@0 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <0>;
-		clocks = <&cpuclk 0>;
-	    };
-
-	    cpu@1 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <1>;
-		clocks = <&cpuclk 1>;
-	    };
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+		};
 	};
 
 	soc {
-		pinctrl {
-			compatible = "marvell,mv78260-pinctrl";
-			reg = <0xd0018000 0x38>;
-
-			sdio_pins: sdio-pins {
-				marvell,pins = "mpp30", "mpp31", "mpp32",
-					       "mpp33", "mpp34", "mpp35";
-				marvell,function = "sd0";
+		internal-regs {
+			pinctrl {
+				compatible = "marvell,mv78260-pinctrl";
+				reg = <0x18000 0x38>;
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp30", "mpp31", "mpp32",
+						       "mpp33", "mpp34", "mpp35";
+					marvell,function = "sd0";
+				};
 			};
-		};
 
-		gpio0: gpio@d0018100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
-		};
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
 
-		gpio1: gpio@d0018140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>, <90>;
-		};
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+			};
 
-		gpio2: gpio@d0018180 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018180 0x40>;
-			ngpios = <3>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <91>;
-		};
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <91>;
+			};
 
-		ethernet@d0034000 {
+			ethernet@34000 {
 				compatible = "marvell,armada-370-neta";
-				reg = <0xd0034000 0x2500>;
+				reg = <0x34000 0x2500>;
 				interrupts = <14>;
 				clocks = <&gateclk 1>;
 				status = "disabled";
+			};
+
+			/*
+			 * MV78260 has 3 PCIe units Gen2.0: Two units can be
+			 * configured as x4 or quad x1 lanes. One unit is
+			 * x4/x1.
+			 */
+			pcie-controller {
+				compatible = "marvell,armada-xp-pcie";
+				status = "disabled";
+				device_type = "pci";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				bus-range = <0x00 0xff>;
+
+				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
+					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
+					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
+					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
+					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
+					0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
+					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
+
+				pcie@1,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+					reg = <0x0800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 58>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 5>;
+					status = "disabled";
+				};
+
+				pcie@2,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+					reg = <0x1000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 59>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <1>;
+					clocks = <&gateclk 6>;
+					status = "disabled";
+				};
+
+				pcie@3,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+					reg = <0x1800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 60>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <2>;
+					clocks = <&gateclk 7>;
+					status = "disabled";
+				};
+
+				pcie@4,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+					reg = <0x2000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 61>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <3>;
+					clocks = <&gateclk 8>;
+					status = "disabled";
+				};
+
+				pcie@9,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+					reg = <0x4800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 99>;
+					marvell,pcie-port = <2>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 26>;
+					status = "disabled";
+				};
+
+				pcie@10,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
+					reg = <0x5000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 103>;
+					marvell,pcie-port = <3>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 27>;
+					status = "disabled";
+				};
+			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -27,89 +27,279 @@ aliases {
 
 
 	cpus {
-	    #address-cells = <1>;
-	    #size-cells = <0>;
-
-	    cpu@0 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <0>;
-		clocks = <&cpuclk 0>;
-	    };
-
-	    cpu@1 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <1>;
-		clocks = <&cpuclk 1>;
-	    };
-
-	    cpu@2 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <2>;
-		clocks = <&cpuclk 2>;
-	    };
-
-	    cpu@3 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <3>;
-		clocks = <&cpuclk 3>;
-	    };
-	};
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	soc {
-		pinctrl {
-			compatible = "marvell,mv78460-pinctrl";
-			reg = <0xd0018000 0x38>;
-
-			sdio_pins: sdio-pins {
-				marvell,pins = "mpp30", "mpp31", "mpp32",
-					       "mpp33", "mpp34", "mpp35";
-				marvell,function = "sd0";
-			};
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
 		};
 
-		gpio0: gpio@d0018100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
 		};
 
-		gpio1: gpio@d0018140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>, <90>;
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <2>;
+			clocks = <&cpuclk 2>;
 		};
 
-		gpio2: gpio@d0018180 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018180 0x40>;
-			ngpios = <3>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <91>;
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <3>;
+			clocks = <&cpuclk 3>;
 		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl {
+				compatible = "marvell,mv78460-pinctrl";
+				reg = <0x18000 0x38>;
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp30", "mpp31", "mpp32",
+						       "mpp33", "mpp34", "mpp35";
+					marvell,function = "sd0";
+				};
+			};
 
-		ethernet@d0034000 {
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <91>;
+			};
+
+			ethernet@34000 {
 				compatible = "marvell,armada-370-neta";
-				reg = <0xd0034000 0x2500>;
+				reg = <0x34000 0x2500>;
 				interrupts = <14>;
 				clocks = <&gateclk 1>;
 				status = "disabled";
+			};
+
+			/*
+			 * MV78460 has 4 PCIe units Gen2.0: Two units can be
+			 * configured as x4 or quad x1 lanes. Two units are
+			 * x4/x1.
+			 */
+			pcie-controller {
+				compatible = "marvell,armada-xp-pcie";
+				status = "disabled";
+				device_type = "pci";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				bus-range = <0x00 0xff>;
+
+				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
+					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
+					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
+					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
+					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
+					0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
+					0x82000000 0 0x84000 0x84000 0 0x00002000   /* Port 1.1 registers */
+					0x82000000 0 0x88000 0x88000 0 0x00002000   /* Port 1.2 registers */
+					0x82000000 0 0x8c000 0x8c000 0 0x00002000   /* Port 1.3 registers */
+					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
+
+				pcie@1,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+					reg = <0x0800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 58>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 5>;
+					status = "disabled";
+				};
+
+				pcie@2,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+					reg = <0x1000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 59>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <1>;
+					clocks = <&gateclk 6>;
+					status = "disabled";
+				};
+
+				pcie@3,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+					reg = <0x1800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 60>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <2>;
+					clocks = <&gateclk 7>;
+					status = "disabled";
+				};
+
+				pcie@4,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+					reg = <0x2000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 61>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <3>;
+					clocks = <&gateclk 8>;
+					status = "disabled";
+				};
+
+				pcie@5,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+					reg = <0x2800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 62>;
+					marvell,pcie-port = <1>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 9>;
+					status = "disabled";
+				};
+
+				pcie@6,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+					reg = <0x3000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 63>;
+					marvell,pcie-port = <1>;
+					marvell,pcie-lane = <1>;
+					clocks = <&gateclk 10>;
+					status = "disabled";
+				};
+
+				pcie@7,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+					reg = <0x3800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 64>;
+					marvell,pcie-port = <1>;
+					marvell,pcie-lane = <2>;
+					clocks = <&gateclk 11>;
+					status = "disabled";
+				};
+
+				pcie@8,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+					reg = <0x4000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 65>;
+					marvell,pcie-port = <1>;
+					marvell,pcie-lane = <3>;
+					clocks = <&gateclk 12>;
+					status = "disabled";
+				};
+				pcie@9,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+					reg = <0x4800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 99>;
+					marvell,pcie-port = <2>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 26>;
+					status = "disabled";
+				};
+
+				pcie@10,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+					reg = <0x5000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 103>;
+					marvell,pcie-port = <3>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 27>;
+					status = "disabled";
+				};
+			};
 		};
 	};
- };
+};

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -23,121 +23,161 @@ chosen {
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0xC0000000>; /* 3 GB */
+		reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */
 	};
 
 	soc {
-		serial@d0012000 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012100 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		pinctrl {
-			led_pins: led-pins-0 {
-				marvell,pins = "mpp49", "mpp51", "mpp53";
-				marvell,function = "gpio";
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
 			};
-		};
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-names = "default";
-			pinctrl-0 = <&led_pins>;
-
-			red_led {
-				label = "red_led";
-				gpios = <&gpio1 17 1>;
-				default-state = "off";
+			serial@12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
 			};
-
-			yellow_led {
-				label = "yellow_led";
-				gpios = <&gpio1 19 1>;
-				default-state = "off";
+			pinctrl {
+				led_pins: led-pins-0 {
+					marvell,pins = "mpp49", "mpp51", "mpp53";
+					marvell,function = "gpio";
+				};
 			};
-
-			green_led {
-				label = "green_led";
-				gpios = <&gpio1 21 1>;
-				default-state = "off";
-				linux,default-trigger = "heartbeat";
+			leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&led_pins>;
+
+				red_led {
+					label = "red_led";
+					gpios = <&gpio1 17 1>;
+					default-state = "off";
+				};
+
+				yellow_led {
+					label = "yellow_led";
+					gpios = <&gpio1 19 1>;
+					default-state = "off";
+				};
+
+				green_led {
+					label = "green_led";
+					gpios = <&gpio1 21 1>;
+					default-state = "off";
+					linux,default-trigger = "heartbeat";
+				};
 			};
-		};
 
-		gpio_keys {
-			compatible = "gpio-keys";
-			#address-cells = <1>;
-			#size-cells = <0>;
+			gpio_keys {
+				compatible = "gpio-keys";
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-			button@1 {
-				label = "Init Button";
-				linux,code = <116>;
-				gpios = <&gpio1 28 0>;
+				button@1 {
+					label = "Init Button";
+					linux,code = <116>;
+					gpios = <&gpio1 28 0>;
+				};
 			};
-		};
 
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
 
-			phy2: ethernet-phy@2 {
-				reg = <2>;
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
 			};
 
-			phy3: ethernet-phy@3 {
-				reg = <3>;
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "sgmii";
+			};
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <400000>;
+			};
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <400000>;
+
+				s35390a: s35390a@30 {
+					compatible = "s35390a";
+					reg = <0x30>;
+				};
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+			usb@50000 {
+				status = "okay";
+			};
+			usb@51000 {
+				status = "okay";
 			};
-		};
 
-		ethernet@d0070000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "sgmii";
-		};
-		ethernet@d0074000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "sgmii";
-		};
-		ethernet@d0030000 {
-			status = "okay";
-			phy = <&phy2>;
-			phy-mode = "sgmii";
-		};
-		ethernet@d0034000 {
-			status = "okay";
-			phy = <&phy3>;
-			phy-mode = "sgmii";
-		};
-		i2c@d0011000 {
-			status = "okay";
-			clock-frequency = <400000>;
-		};
-		i2c@d0011100 {
-			status = "okay";
-			clock-frequency = <400000>;
+			devbus-bootcs@10400 {
+				status = "okay";
+				ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */
+
+				/* Device Bus parameters are required */
+
+				/* Read parameters */
+				devbus,bus-width    = <8>;
+				devbus,turn-off-ps  = <60000>;
+				devbus,badr-skew-ps = <0>;
+				devbus,acc-first-ps = <124000>;
+				devbus,acc-next-ps  = <248000>;
+				devbus,rd-setup-ps  = <0>;
+				devbus,rd-hold-ps   = <0>;
+
+				/* Write parameters */
+				devbus,sync-enable = <0>;
+				devbus,wr-high-ps  = <60000>;
+				devbus,wr-low-ps   = <60000>;
+				devbus,ale-wr-ps   = <60000>;
+
+				/* NOR 128 MiB */
+				nor@0 {
+					compatible = "cfi-flash";
+					reg = <0 0x8000000>;
+					bank-width = <2>;
+				};
+			};
 
-			s35390a: s35390a@30 {
-				compatible = "s35390a";
-				reg = <0x30>;
+			pcie-controller {
+				status = "okay";
+				/* Internal mini-PCIe connector */
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
 			};
 		};
-		sata@d00a0000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
-		usb@d0050000 {
-			status = "okay";
-		};
-		usb@d0051000 {
-			status = "okay";
-		};
 	};
 };

arch/arm/boot/dts/armada-xp.dtsi

@@ -22,134 +22,140 @@ / {
 	model = "Marvell Armada XP family SoC";
 	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
 
-	L2: l2-cache {
-		compatible = "marvell,aurora-system-cache";
-		reg = <0xd0008000 0x1000>;
-		cache-id-part = <0x100>;
-		wt-override;
-	};
+	soc {
+		internal-regs {
+			L2: l2-cache {
+				compatible = "marvell,aurora-system-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				wt-override;
+			};
 
-	mpic: interrupt-controller@d0020000 {
-	      reg = <0xd0020a00 0x2d0>,
-		    <0xd0021070 0x58>;
-	};
+			mpic: interrupt-controller@20000 {
+			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+			};
 
-	armada-370-xp-pmsu@d0022000 {
-		compatible = "marvell,armada-370-xp-pmsu";
-		reg = <0xd0022100 0x430>,
-		      <0xd0020800 0x20>;
-	};
+			armada-370-xp-pmsu@22000 {
+				compatible = "marvell,armada-370-xp-pmsu";
+				reg = <0x22100 0x430>, <0x20800 0x20>;
+			};
 
-	soc {
-		serial@d0012200 {
+			serial@12200 {
 				compatible = "snps,dw-apb-uart";
-				reg = <0xd0012200 0x100>;
+				reg = <0x12200 0x100>;
 				reg-shift = <2>;
 				interrupts = <43>;
 				reg-io-width = <1>;
 				status = "disabled";
-		};
-		serial@d0012300 {
+			};
+			serial@12300 {
 				compatible = "snps,dw-apb-uart";
-				reg = <0xd0012300 0x100>;
+				reg = <0x12300 0x100>;
 				reg-shift = <2>;
 				interrupts = <44>;
 				reg-io-width = <1>;
 				status = "disabled";
-		};
+			};
 
-		timer@d0020300 {
+			timer@20300 {
 				marvell,timer-25Mhz;
-		};
+			};
 
-		coreclk: mvebu-sar@d0018230 {
-			compatible = "marvell,armada-xp-core-clock";
-			reg = <0xd0018230 0x08>;
-			#clock-cells = <1>;
-		};
+			coreclk: mvebu-sar@18230 {
+				compatible = "marvell,armada-xp-core-clock";
+				reg = <0x18230 0x08>;
+				#clock-cells = <1>;
+			};
 
-		cpuclk: clock-complex@d0018700 {
-			#clock-cells = <1>;
-			compatible = "marvell,armada-xp-cpu-clock";
-			reg = <0xd0018700 0xA0>;
-			clocks = <&coreclk 1>;
-		};
+			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
+				compatible = "marvell,armada-xp-cpu-clock";
+				reg = <0x18700 0xA0>;
+				clocks = <&coreclk 1>;
+			};
 
-		gateclk: clock-gating-control@d0018220 {
-			compatible = "marvell,armada-xp-gating-clock";
-			reg = <0xd0018220 0x4>;
-			clocks = <&coreclk 0>;
-			#clock-cells = <1>;
-		};
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-xp-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
 
-		system-controller@d0018200 {
+			system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0xd0018200 0x500>;
-		};
+				reg = <0x18200 0x500>;
+			};
 
-		ethernet@d0030000 {
+			ethernet@30000 {
 				compatible = "marvell,armada-370-neta";
-				reg = <0xd0030000 0x2500>;
+				reg = <0x30000 0x2500>;
 				interrupts = <12>;
 				clocks = <&gateclk 2>;
 				status = "disabled";
-		};
-
-		xor@d0060900 {
-			compatible = "marvell,orion-xor";
-			reg = <0xd0060900 0x100
-			       0xd0060b00 0x100>;
-			clocks = <&gateclk 22>;
-			status = "okay";
-
-			xor10 {
-				interrupts = <51>;
-				dmacap,memcpy;
-				dmacap,xor;
-			};
-			xor11 {
-				interrupts = <52>;
-				dmacap,memcpy;
-				dmacap,xor;
-				dmacap,memset;
 			};
-		};
 
-		xor@d00f0900 {
-			compatible = "marvell,orion-xor";
-			reg = <0xd00F0900 0x100
-			       0xd00F0B00 0x100>;
-			clocks = <&gateclk 28>;
-			status = "okay";
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
 
-			xor00 {
-				interrupts = <94>;
-				dmacap,memcpy;
-				dmacap,xor;
+			xor@f0900 {
+				compatible = "marvell,orion-xor";
+				reg = <0xF0900 0x100
+				       0xF0B00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
 			};
-			xor01 {
-				interrupts = <95>;
-				dmacap,memcpy;
-				dmacap,xor;
-				dmacap,memset;
+
+			usb@50000 {
+				clocks = <&gateclk 18>;
 			};
-		};
 
-		usb@d0050000 {
-			clocks = <&gateclk 18>;
-		};
+			usb@51000 {
+				clocks = <&gateclk 19>;
+			};
 
-		usb@d0051000 {
-			clocks = <&gateclk 19>;
-		};
+			usb@52000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x52000 0x500>;
+				interrupts = <47>;
+				clocks = <&gateclk 20>;
+				status = "disabled";
+			};
 
-		usb@d0052000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0xd0052000 0x500>;
-			interrupts = <47>;
-			clocks = <&gateclk 20>;
-			status = "disabled";
+			thermal@182b0 {
+				compatible = "marvell,armadaxp-thermal";
+				reg = <0x182b0 0x4
+					0x184d0 0x4>;
+				status = "okay";
+			};
 		};
-
 	};
 };

arch/arm/boot/dts/dove.dtsi

@@ -50,6 +50,11 @@ gate_clk: clock-gating-control@d0038 {
 			#clock-cells = <1>;
 		};
 
+		thermal: thermal@d001c {
+			compatible = "marvell,dove-thermal";
+			reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+		};
+
 		uart0: serial@12000 {
 			compatible = "ns16550a";
 			reg = <0x12000 0x100>;

arch/arm/boot/dts/kirkwood-6282.dtsi

@@ -49,6 +49,12 @@ pmx_sdio: pmx-sdio {
 			};
 		};
 
+		thermal@10078 {
+			compatible = "marvell,kirkwood-thermal";
+			reg = <0x10078 0x4>;
+			status = "okay";
+		};
+
 		i2c@11100 {
 			compatible = "marvell,mv64xxx-i2c";
 			reg = <0x11100 0x20>;

arch/arm/boot/dts/kirkwood-goflexnet.dts

@@ -77,6 +77,7 @@ serial@12000 {
 		};
 
 		nand@3000000 {
+			chip-delay = <40>;
 			status = "okay";
 
 			partition@0 {

arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts

@@ -69,6 +69,10 @@ sata@80000 {
 			status = "okay";
 			nr-ports = <1>;
 		};
+
+		mvsdio@90000 {
+			status = "okay";
+		};
 	};
 
 	gpio-leds {

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

@@ -96,11 +96,11 @@ pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
 				marvell,function = "gpio";
 			};
 			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
-				marvell,pins = "mpp44";
+				marvell,pins = "mpp46";
 				marvell,function = "gpio";
 			};
 			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
-				marvell,pins = "mpp45";
+				marvell,pins = "mpp47";
 				marvell,function = "gpio";
 			};
 
@@ -157,14 +157,14 @@ power_led {
 			gpios = <&gpio0 16 0>;
 			linux,default-trigger = "default-on";
 		};
-		health_led1 {
+		rebuild_led {
+			label = "status:white:rebuild_led";
+			gpios = <&gpio1 4 0>;
+		};
+		health_led {
 			label = "status:red:health_led";
 			gpios = <&gpio1 5 0>;
 		};
-		health_led2 {
-			label = "status:white:health_led";
-			gpios = <&gpio1 4 0>;
-		};
 		backup_led {
 			label = "status:blue:backup_led";
 			gpios = <&gpio0 15 0>;

arch/arm/boot/dts/orion5x.dtsi

@@ -13,6 +13,9 @@ / {
 	compatible = "marvell,orion5x";
 	interrupt-parent = <&intc>;
 
+	aliases {
+		gpio0 = &gpio0;
+	};
 	intc: interrupt-controller {
 		compatible = "marvell,orion-intc", "marvell,intc";
 		interrupt-controller;
@@ -32,7 +35,9 @@ gpio0: gpio@10100 {
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0x10100 0x40>;
-			ngpio = <32>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <6>, <7>, <8>, <9>;
 		};
 
@@ -69,6 +74,20 @@ wdt@20300 {
 			status = "okay";
 		};
 
+		ehci@50000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0x50000 0x1000>;
+			interrupts = <17>;
+			status = "disabled";
+		};
+
+		ehci@a0000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0xa0000 0x1000>;
+			interrupts = <12>;
+			status = "disabled";
+		};
+
 		sata@80000 {
 			compatible = "marvell,orion-sata";
 			reg = <0x80000 0x5000>;
@@ -86,12 +105,31 @@ i2c@11000 {
 			status = "disabled";
 		};
 
+		xor@60900 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60900 0x100
+			       0x60b00 0x100>;
+			status = "okay";
+
+			xor00 {
+			      interrupts = <30>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <31>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
+		};
+
 		crypto@90000 {
 			compatible = "marvell,orion-crypto";
 			reg = <0x90000 0x10000>,
 			      <0xf2200000 0x800>;
 			reg-names = "regs", "sram";
-			interrupts = <22>;
+			interrupts = <28>;
 			status = "okay";
 		};
 	};

arch/arm/boot/dts/skeleton64.dtsi

+/*
+ * Skeleton device tree in the 64 bits version; the bare minimum
+ * needed to boot; just include and add a compatible value.  The
+ * bootloader will typically populate the memory node.
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	chosen { };
+	aliases { };
+	memory { device_type = "memory"; reg = <0 0>; };
+};

arch/arm/configs/dove_defconfig

@@ -75,6 +75,8 @@ CONFIG_I2C_MV64XXX=y
 CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 # CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_DOVE_THERMAL=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y

arch/arm/configs/kirkwood_defconfig

@@ -119,6 +119,8 @@ CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_KIRKWOOD_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
 CONFIG_HID_DRAGONRISE=y

arch/arm/configs/mvebu_defconfig

@@ -46,9 +46,16 @@ CONFIG_I2C_MV64XXX=y
 CONFIG_MTD=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_THERMAL=y
+CONFIG_ARMADA_THERMAL=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
@@ -65,6 +72,8 @@ CONFIG_RTC_DRV_S35390A=y
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
 CONFIG_MV_XOR=y
+CONFIG_MEMORY=y
+CONFIG_MVEBU_DEVBUS=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y

arch/arm/include/debug/mvebu.S

@@ -12,7 +12,7 @@
 */
 
 #define ARMADA_370_XP_REGS_PHYS_BASE	0xd0000000
-#define ARMADA_370_XP_REGS_VIRT_BASE	0xfeb00000
+#define ARMADA_370_XP_REGS_VIRT_BASE	0xfec00000
 
 	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =ARMADA_370_XP_REGS_PHYS_BASE

arch/arm/mach-dove/Makefile

-obj-y				+= common.o addr-map.o irq.o
+obj-y				+= common.o irq.o
 obj-$(CONFIG_DOVE_LEGACY)	+= mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o

arch/arm/mach-dove/addr-map.c

-/*
- * arch/arm/mach-dove/addr-map.c
- *
- * Address map functions for Marvell Dove 88AP510 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-#include <mach/dove.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DDR		0x0
-#define TARGET_BOOTROM		0x1
-#define TARGET_CESA		0x3
-#define TARGET_PCIE0		0x4
-#define TARGET_PCIE1		0x8
-#define TARGET_SCRATCHPAD	0xd
-
-#define ATTR_CESA		0x01
-#define ATTR_BOOTROM		0xfd
-#define ATTR_DEV_SPI0_ROM	0xfe
-#define ATTR_DEV_SPI1_ROM	0xfb
-#define ATTR_PCIE_IO		0xe0
-#define ATTR_PCIE_MEM		0xe8
-#define ATTR_SCRATCHPAD		0x0
-
-static inline void __iomem *ddr_map_sc(int i)
-{
-	return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
-}
-
-/*
- * Description of the windows needed by the platform code
- */
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
-	.num_wins = 8,
-	.remappable_wins = 4,
-	.bridge_virt_base = BRIDGE_VIRT_BASE,
-};
-
-static const struct __initdata orion_addr_map_info addr_map_info[] = {
-	/*
-	 * Windows for PCIe IO+MEM space.
-	 */
-	{ 0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
-	  TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE
-	},
-	{ 1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
-	  TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE
-	},
-	{ 2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
-	  TARGET_PCIE0, ATTR_PCIE_MEM, -1
-	},
-	{ 3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
-	  TARGET_PCIE1, ATTR_PCIE_MEM, -1
-	},
-	/*
-	 * Window for CESA engine.
-	 */
-	{ 4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
-	  TARGET_CESA, ATTR_CESA, -1
-	},
-	/*
-	 * Window to the BootROM for Standby and Sleep Resume
-	 */
-	{ 5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
-	  TARGET_BOOTROM, ATTR_BOOTROM, -1
-	},
-	/*
-	 * Window to the PMU Scratch Pad space
-	 */
-	{ 6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
-	  TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1
-	},
-	/* End marker */
-	{ -1, 0, 0, 0, 0, 0 }
-};
-
-void __init dove_setup_cpu_mbus(void)
-{
-	int i;
-	int cs;
-
-	/*
-	 * Disable, clear and configure windows.
-	 */
-	orion_config_wins(&addr_map_cfg, addr_map_info);
-
-	/*
-	 * Setup MBUS dram target info.
-	 */
-	orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
-	for (i = 0, cs = 0; i < 2; i++) {
-		u32 map = readl(ddr_map_sc(i));
-
-		/*
-		 * Chip select enabled?
-		 */
-		if (map & 1) {
-			struct mbus_dram_window *w;
-
-			w = &orion_mbus_dram_info.cs[cs++];
-			w->cs_index = i;
-			w->mbus_attr = 0; /* CS address decoding done inside */
-					  /* the DDR controller, no need to  */
-					  /* provide attributes */
-			w->base = map & 0xff800000;
-			w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
-		}
-	}
-	orion_mbus_dram_info.num_cs = cs;
-}

arch/arm/mach-dove/board-dt.c

@@ -64,7 +64,7 @@ static void __init dove_dt_init(void)
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init(0);
 #endif
-	dove_setup_cpu_mbus();
+	dove_setup_cpu_wins();
 
 	/* Setup root of clk tree */
 	dove_of_clk_init();

arch/arm/mach-dove/common.c

@@ -224,6 +224,9 @@ void __init dove_i2c_init(void)
 void __init dove_init_early(void)
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
+	mvebu_mbus_init("marvell,dove-mbus",
+			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
+			DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ);
 }
 
 static int __init dove_find_tclk(void)
@@ -326,6 +329,40 @@ void __init dove_sdio1_init(void)
 	platform_device_register(&dove_sdio1);
 }
 
+void __init dove_setup_cpu_wins(void)
+{
+	/*
+	 * The PCIe windows will no longer be statically allocated
+	 * here once Dove is migrated to the pci-mvebu driver.
+	 */
+	mvebu_mbus_add_window_remap_flags("pcie0.0",
+					  DOVE_PCIE0_IO_PHYS_BASE,
+					  DOVE_PCIE0_IO_SIZE,
+					  DOVE_PCIE0_IO_BUS_BASE,
+					  MVEBU_MBUS_PCI_IO);
+	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  DOVE_PCIE1_IO_PHYS_BASE,
+					  DOVE_PCIE1_IO_SIZE,
+					  DOVE_PCIE1_IO_BUS_BASE,
+					  MVEBU_MBUS_PCI_IO);
+	mvebu_mbus_add_window_remap_flags("pcie0.0",
+					  DOVE_PCIE0_MEM_PHYS_BASE,
+					  DOVE_PCIE0_MEM_SIZE,
+					  MVEBU_MBUS_NO_REMAP,
+					  MVEBU_MBUS_PCI_MEM);
+	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  DOVE_PCIE1_MEM_PHYS_BASE,
+					  DOVE_PCIE1_MEM_SIZE,
+					  MVEBU_MBUS_NO_REMAP,
+					  MVEBU_MBUS_PCI_MEM);
+	mvebu_mbus_add_window("cesa", DOVE_CESA_PHYS_BASE,
+			      DOVE_CESA_SIZE);
+	mvebu_mbus_add_window("bootrom", DOVE_BOOTROM_PHYS_BASE,
+			      DOVE_BOOTROM_SIZE);
+	mvebu_mbus_add_window("scratchpad", DOVE_SCRATCHPAD_PHYS_BASE,
+			      DOVE_SCRATCHPAD_SIZE);
+}
+
 void __init dove_init(void)
 {
 	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
@@ -334,7 +371,7 @@ void __init dove_init(void)
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init(0);
 #endif
-	dove_setup_cpu_mbus();
+	dove_setup_cpu_wins();
 
 	/* Setup root of clk tree */
 	dove_clk_init();

arch/arm/mach-dove/common.h

@@ -23,7 +23,7 @@ void dove_map_io(void);
 void dove_init(void);
 void dove_init_early(void);
 void dove_init_irq(void);
-void dove_setup_cpu_mbus(void);
+void dove_setup_cpu_wins(void);
 void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
 void dove_sata_init(struct mv_sata_platform_data *sata_data);
 #ifdef CONFIG_PCI

arch/arm/mach-dove/include/mach/dove.h

@@ -77,6 +77,8 @@
 /* North-South Bridge */
 #define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x20000)
 #define BRIDGE_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x20000)
+#define  BRIDGE_WINS_BASE       (BRIDGE_PHYS_BASE)
+#define  BRIDGE_WINS_SZ         (0x80)
 
 /* Cryptographic Engine */
 #define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x30000)
@@ -168,6 +170,9 @@
 #define  DOVE_SSP_CLOCK_ENABLE		(1 << 1)
 #define  DOVE_SSP_BPB_CLOCK_SRC_SSP	(1 << 11)
 /* Memory Controller */
+#define DOVE_MC_PHYS_BASE       (DOVE_NB_REGS_PHYS_BASE + 0x00000)
+#define  DOVE_MC_WINS_BASE      (DOVE_MC_PHYS_BASE + 0x100)
+#define  DOVE_MC_WINS_SZ        (0x8)
 #define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE + 0x00000)
 
 /* LCD Controller */

arch/arm/mach-kirkwood/Makefile

-obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
+obj-y				+= common.o irq.o pcie.o mpp.o
 
 obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o

arch/arm/mach-kirkwood/addr-map.c

-/*
- * arch/arm/mach-kirkwood/addr-map.c
- *
- * Address map functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DEV_BUS		1
-#define TARGET_SRAM		3
-#define TARGET_PCIE		4
-#define ATTR_DEV_SPI_ROM	0x1e
-#define ATTR_DEV_BOOT		0x1d
-#define ATTR_DEV_NAND		0x2f
-#define ATTR_DEV_CS3		0x37
-#define ATTR_DEV_CS2		0x3b
-#define ATTR_DEV_CS1		0x3d
-#define ATTR_DEV_CS0		0x3e
-#define ATTR_PCIE_IO		0xe0
-#define ATTR_PCIE_MEM		0xe8
-#define ATTR_PCIE1_IO		0xd0
-#define ATTR_PCIE1_MEM		0xd8
-#define ATTR_SRAM		0x01
-
-/*
- * Description of the windows needed by the platform code
- */
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
-	.num_wins = 8,
-	.remappable_wins = 4,
-	.bridge_virt_base = BRIDGE_VIRT_BASE,
-};
-
-static const struct __initdata orion_addr_map_info addr_map_info[] = {
-	/*
-	 * Windows for PCIe IO+MEM space.
-	 */
-	{ 0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
-	  TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE
-	},
-	{ 1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
-	  TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE
-	},
-	{ 2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
-	  TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE
-	},
-	{ 3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
-	  TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE
-	},
-	/*
-	 * Window for NAND controller.
-	 */
-	{ 4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
-	  TARGET_DEV_BUS, ATTR_DEV_NAND, -1
-	},
-	/*
-	 * Window for SRAM.
-	 */
-	{ 5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
-	  TARGET_SRAM, ATTR_SRAM, -1
-	},
-	/* End marker */
-	{ -1, 0, 0, 0, 0, 0 }
-};
-
-void __init kirkwood_setup_cpu_mbus(void)
-{
-	/*
-	 * Disable, clear and configure windows.
-	 */
-	orion_config_wins(&addr_map_cfg, addr_map_info);
-
-	/*
-	 * Setup MBUS dram target info.
-	 */
-	orion_setup_cpu_mbus_target(&addr_map_cfg,
-				    (void __iomem *) DDR_WINDOW_CPU_BASE);
-}

arch/arm/mach-kirkwood/board-dt.c

@@ -93,7 +93,7 @@ static void __init kirkwood_dt_init(void)
 	 */
 	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
 
-	kirkwood_setup_cpu_mbus();
+	kirkwood_setup_wins();
 
 	kirkwood_l2_init();
 

arch/arm/mach-kirkwood/board-guruplug.c

@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
-#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data guruplug_ge00_data = {
@@ -24,10 +23,6 @@ static struct mv643xx_eth_platform_data guruplug_ge01_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
 };
 
-static struct mvsdio_platform_data guruplug_mvsdio_data = {
-	/* unfortunately the CD signal has not been connected */
-};
-
 void __init guruplug_dt_init(void)
 {
 	/*
@@ -35,5 +30,4 @@ void __init guruplug_dt_init(void)
 	 */
 	kirkwood_ge00_init(&guruplug_ge00_data);
 	kirkwood_ge01_init(&guruplug_ge01_data);
-	kirkwood_sdio_init(&guruplug_mvsdio_data);
 }

arch/arm/mach-kirkwood/board-iomega_ix2_200.c

@@ -20,10 +20,15 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
 	.duplex         = DUPLEX_FULL,
 };
 
+static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
+};
+
 void __init iomega_ix2_200_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
+	kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
+	kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
 }

arch/arm/mach-kirkwood/common.c

@@ -33,7 +33,6 @@
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/common.h>
 #include <plat/time.h>
-#include <plat/addr-map.h>
 #include <linux/platform_data/dma-mv_xor.h>
 #include "common.h"
 
@@ -535,6 +534,9 @@ void __init kirkwood_init_early(void)
 	 * the allocations won't fail.
 	 */
 	init_dma_coherent_pool_size(SZ_1M);
+	mvebu_mbus_init("marvell,kirkwood-mbus",
+			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
+			DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
 }
 
 int kirkwood_tclk;
@@ -650,6 +652,38 @@ char * __init kirkwood_id(void)
 	}
 }
 
+void __init kirkwood_setup_wins(void)
+{
+	/*
+	 * The PCIe windows will no longer be statically allocated
+	 * here once Kirkwood is migrated to the pci-mvebu driver.
+	 */
+	mvebu_mbus_add_window_remap_flags("pcie0.0",
+					  KIRKWOOD_PCIE_IO_PHYS_BASE,
+					  KIRKWOOD_PCIE_IO_SIZE,
+					  KIRKWOOD_PCIE_IO_BUS_BASE,
+					  MVEBU_MBUS_PCI_IO);
+	mvebu_mbus_add_window_remap_flags("pcie0.0",
+					  KIRKWOOD_PCIE_MEM_PHYS_BASE,
+					  KIRKWOOD_PCIE_MEM_SIZE,
+					  MVEBU_MBUS_NO_REMAP,
+					  MVEBU_MBUS_PCI_MEM);
+	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  KIRKWOOD_PCIE1_IO_PHYS_BASE,
+					  KIRKWOOD_PCIE1_IO_SIZE,
+					  KIRKWOOD_PCIE1_IO_BUS_BASE,
+					  MVEBU_MBUS_PCI_IO);
+	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  KIRKWOOD_PCIE1_MEM_PHYS_BASE,
+					  KIRKWOOD_PCIE1_MEM_SIZE,
+					  MVEBU_MBUS_NO_REMAP,
+					  MVEBU_MBUS_PCI_MEM);
+	mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE,
+			      KIRKWOOD_NAND_MEM_SIZE);
+	mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE,
+			      KIRKWOOD_SRAM_SIZE);
+}
+
 void __init kirkwood_l2_init(void)
 {
 #ifdef CONFIG_CACHE_FEROCEON_L2
@@ -675,7 +709,7 @@ void __init kirkwood_init(void)
 	 */
 	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
 
-	kirkwood_setup_cpu_mbus();
+	kirkwood_setup_wins();
 
 	kirkwood_l2_init();
 

arch/arm/mach-kirkwood/common.h

@@ -30,7 +30,7 @@ void kirkwood_init(void);
 void kirkwood_init_early(void);
 void kirkwood_init_irq(void);
 
-void kirkwood_setup_cpu_mbus(void);
+void kirkwood_setup_wins(void);
 
 void kirkwood_enable_pcie(void);
 void kirkwood_pcie_id(u32 *dev, u32 *rev);

arch/arm/mach-kirkwood/guruplug-setup.c

@@ -53,6 +53,8 @@ static struct mv_sata_platform_data guruplug_sata_data = {
 
 static struct mvsdio_platform_data guruplug_mvsdio_data = {
 	/* unfortunately the CD signal has not been connected */
+	.gpio_card_detect = -1,
+	.gpio_write_protect = -1,
 };
 
 static struct gpio_led guruplug_led_pins[] = {

arch/arm/mach-kirkwood/include/mach/kirkwood.h

@@ -60,8 +60,9 @@
  * Register Map
  */
 #define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x00000)
-#define DDR_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x00000)
-#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE + 0x1500)
+#define DDR_PHYS_BASE           (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
+#define  DDR_WINDOW_CPU_BASE    (DDR_PHYS_BASE + 0x1500)
+#define  DDR_WINDOW_CPU_SZ      (0x20)
 #define DDR_OPERATION_BASE	(DDR_PHYS_BASE + 0x1418)
 
 #define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x10000)
@@ -80,6 +81,8 @@
 
 #define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x20000)
 #define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+#define  BRIDGE_WINS_BASE       (BRIDGE_PHYS_BASE)
+#define  BRIDGE_WINS_SZ         (0x80)
 
 #define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x30000)
 

arch/arm/mach-kirkwood/openrd-setup.c

@@ -55,6 +55,7 @@ static struct mv_sata_platform_data openrd_sata_data = {
 
 static struct mvsdio_platform_data openrd_mvsdio_data = {
 	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+	.gpio_write_protect = -1,
 };
 
 static unsigned int openrd_mpp_config[] __initdata = {

arch/arm/mach-kirkwood/pcie.c

@@ -17,7 +17,6 @@
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
 #include <mach/bridge-regs.h>
-#include <plat/addr-map.h>
 #include "common.h"
 
 static void kirkwood_enable_pcie_clk(const char *port)

arch/arm/mach-kirkwood/rd88f6281-setup.c

@@ -69,6 +69,7 @@ static struct mv_sata_platform_data rd88f6281_sata_data = {
 
 static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
 	.gpio_card_detect = 28,
+	.gpio_write_protect = -1,
 };
 
 static unsigned int rd88f6281_mpp_config[] __initdata = {

arch/arm/mach-mv78xx0/Makefile

-obj-y				+= common.o addr-map.o mpp.o irq.o pcie.o
+obj-y				+= common.o mpp.o irq.o pcie.o
 obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
 obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
 obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o

arch/arm/mach-mv78xx0/addr-map.c

-/*
- * arch/arm/mach-mv78xx0/addr-map.c
- *
- * Address map functions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <plat/addr-map.h>
-#include <mach/mv78xx0.h>
-#include "common.h"
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DEV_BUS		1
-#define TARGET_PCIE0		4
-#define TARGET_PCIE1		8
-#define TARGET_PCIE(i)		((i) ? TARGET_PCIE1 : TARGET_PCIE0)
-#define ATTR_DEV_SPI_ROM	0x1f
-#define ATTR_DEV_BOOT		0x2f
-#define ATTR_DEV_CS3		0x37
-#define ATTR_DEV_CS2		0x3b
-#define ATTR_DEV_CS1		0x3d
-#define ATTR_DEV_CS0		0x3e
-#define ATTR_PCIE_IO(l)		(0xf0 & ~(0x10 << (l)))
-#define ATTR_PCIE_MEM(l)	(0xf8 & ~(0x10 << (l)))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define WIN0_OFF(n)		(BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
-#define WIN8_OFF(n)		(BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
-
-static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
-{
-	/*
-	 * Find the control register base address for this window.
-	 *
-	 * BRIDGE_VIRT_BASE points to the right (CPU0's or CPU1's)
-	 * MBUS bridge depending on which CPU core we're running on,
-	 * so we don't need to take that into account here.
-	 */
-
-	return (win < 8) ? WIN0_OFF(win) : WIN8_OFF(win);
-}
-
-/*
- * Description of the windows needed by the platform code
- */
-static struct orion_addr_map_cfg addr_map_cfg __initdata = {
-	.num_wins = 14,
-	.remappable_wins = 8,
-	.win_cfg_base = win_cfg_base,
-};
-
-void __init mv78xx0_setup_cpu_mbus(void)
-{
-	/*
-	 * Disable, clear and configure windows.
-	 */
-	orion_config_wins(&addr_map_cfg, NULL);
-
-	/*
-	 * Setup MBUS dram target info.
-	 */
-	if (mv78xx0_core_index() == 0)
-		orion_setup_cpu_mbus_target(&addr_map_cfg,
-					    (void __iomem *) DDR_WINDOW_CPU0_BASE);
-	else
-		orion_setup_cpu_mbus_target(&addr_map_cfg,
-					    (void __iomem *) DDR_WINDOW_CPU1_BASE);
-}
-
-void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
-				      int maj, int min)
-{
-	orion_setup_cpu_win(&addr_map_cfg, window, base, size,
-			    TARGET_PCIE(maj), ATTR_PCIE_IO(min), 0);
-}
-
-void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
-				       int maj, int min)
-{
-	orion_setup_cpu_win(&addr_map_cfg, window, base, size,
-			    TARGET_PCIE(maj), ATTR_PCIE_MEM(min), -1);
-}

arch/arm/mach-mv78xx0/common.c

@@ -334,6 +334,14 @@ void __init mv78xx0_uart3_init(void)
 void __init mv78xx0_init_early(void)
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
+	if (mv78xx0_core_index() == 0)
+		mvebu_mbus_init("marvell,mv78xx0-mbus",
+				BRIDGE_WINS_CPU0_BASE, BRIDGE_WINS_SZ,
+				DDR_WINDOW_CPU0_BASE, DDR_WINDOW_CPU_SZ);
+	else
+		mvebu_mbus_init("marvell,mv78xx0-mbus",
+				BRIDGE_WINS_CPU1_BASE, BRIDGE_WINS_SZ,
+				DDR_WINDOW_CPU1_BASE, DDR_WINDOW_CPU_SZ);
 }
 
 void __init_refok mv78xx0_timer_init(void)
@@ -397,8 +405,6 @@ void __init mv78xx0_init(void)
 	printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
 	printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
 
-	mv78xx0_setup_cpu_mbus();
-
 #ifdef CONFIG_CACHE_FEROCEON_L2
 	feroceon_l2_init(is_l2_writethrough());
 #endif

arch/arm/mach-mv78xx0/include/mach/mv78xx0.h

@@ -60,13 +60,18 @@
  */
 #define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
 #define BRIDGE_PHYS_BASE	(MV78XX0_CORE_REGS_PHYS_BASE)
+#define  BRIDGE_WINS_CPU0_BASE  (MV78XX0_CORE0_REGS_PHYS_BASE)
+#define  BRIDGE_WINS_CPU1_BASE  (MV78XX0_CORE1_REGS_PHYS_BASE)
+#define  BRIDGE_WINS_SZ         (0xA000)
 
 /*
  * Register Map
  */
 #define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE + 0x00000)
-#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE + 0x1500)
-#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE + 0x1570)
+#define DDR_PHYS_BASE           (MV78XX0_REGS_PHYS_BASE + 0x00000)
+#define  DDR_WINDOW_CPU0_BASE	(DDR_PHYS_BASE + 0x1500)
+#define  DDR_WINDOW_CPU1_BASE	(DDR_PHYS_BASE + 0x1570)
+#define  DDR_WINDOW_CPU_SZ      (0x20)
 
 #define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE + 0x10000)
 #define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x10000)

arch/arm/mach-mv78xx0/pcie.c

@@ -10,11 +10,11 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/mbus.h>
 #include <video/vga.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
-#include <plat/addr-map.h>
 #include <mach/mv78xx0.h>
 #include "common.h"
 
@@ -54,7 +54,6 @@ static void __init mv78xx0_pcie_preinit(void)
 	int i;
 	u32 size_each;
 	u32 start;
-	int win = 0;
 
 	pcie_io_space.name = "PCIe I/O Space";
 	pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0);
@@ -72,6 +71,7 @@ static void __init mv78xx0_pcie_preinit(void)
 	start = MV78XX0_PCIE_MEM_PHYS_BASE;
 	for (i = 0; i < num_pcie_ports; i++) {
 		struct pcie_port *pp = pcie_port + i;
+		char winname[MVEBU_MBUS_MAX_WINNAME_SZ];
 
 		snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
 			"PCIe %d.%d MEM", pp->maj, pp->min);
@@ -85,12 +85,17 @@ static void __init mv78xx0_pcie_preinit(void)
 		if (request_resource(&iomem_resource, &pp->res))
 			panic("can't allocate PCIe MEM sub-space");
 
-		mv78xx0_setup_pcie_mem_win(win + i + 8, pp->res.start,
-					   resource_size(&pp->res),
-					   pp->maj, pp->min);
-
-		mv78xx0_setup_pcie_io_win(win + i, i * SZ_64K, SZ_64K,
-					  pp->maj, pp->min);
+		snprintf(winname, sizeof(winname), "pcie%d.%d",
+			 pp->maj, pp->min);
+
+		mvebu_mbus_add_window_remap_flags(winname,
+						  pp->res.start,
+						  resource_size(&pp->res),
+						  MVEBU_MBUS_NO_REMAP,
+						  MVEBU_MBUS_PCI_MEM);
+		mvebu_mbus_add_window_remap_flags(winname,
+						  i * SZ_64K, SZ_64K,
+						  0, MVEBU_MBUS_PCI_IO);
 	}
 }
 

arch/arm/mach-mvebu/Kconfig

@@ -13,6 +13,8 @@ config ARCH_MVEBU
 	select MVEBU_CLK_CORE
 	select MVEBU_CLK_CPU
 	select MVEBU_CLK_GATING
+	select MVEBU_MBUS
+	select ZONE_DMA if ARM_LPAE
 
 if ARCH_MVEBU
 

arch/arm/mach-mvebu/Makefile

@@ -5,6 +5,6 @@ AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
 
 obj-y				 += system-controller.o
 obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
-obj-$(CONFIG_ARCH_MVEBU)	 += addr-map.o coherency.o coherency_ll.o pmsu.o irq-armada-370-xp.o 
+obj-$(CONFIG_ARCH_MVEBU)	 += coherency.o coherency_ll.o pmsu.o irq-armada-370-xp.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)        += hotplug.o

arch/arm/mach-mvebu/addr-map.c

-/*
- * Address map functions for Marvell 370 / XP SoCs
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <plat/addr-map.h>
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define ARMADA_XP_TARGET_DEV_BUS	1
-#define   ARMADA_XP_ATTR_DEV_BOOTROM    0x1D
-#define ARMADA_XP_TARGET_ETH1		3
-#define ARMADA_XP_TARGET_PCIE_0_2	4
-#define ARMADA_XP_TARGET_ETH0		7
-#define ARMADA_XP_TARGET_PCIE_1_3	8
-
-#define ARMADA_370_TARGET_DEV_BUS       1
-#define   ARMADA_370_ATTR_DEV_BOOTROM   0x1D
-#define ARMADA_370_TARGET_PCIE_0        4
-#define ARMADA_370_TARGET_PCIE_1        8
-
-#define ARMADA_WINDOW_8_PLUS_OFFSET       0x90
-#define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180
-
-static const struct __initdata orion_addr_map_info
-armada_xp_addr_map_info[] = {
-	/*
-	 * Window for the BootROM, needed for SMP on Armada XP
-	 */
-	{ 0, 0xfff00000, SZ_1M, ARMADA_XP_TARGET_DEV_BUS,
-	  ARMADA_XP_ATTR_DEV_BOOTROM, -1 },
-	/* End marker */
-	{ -1, 0, 0, 0, 0, 0 },
-};
-
-static const struct __initdata orion_addr_map_info
-armada_370_addr_map_info[] = {
-	/* End marker */
-	{ -1, 0, 0, 0, 0, 0 },
-};
-
-static struct of_device_id of_addr_decoding_controller_table[] = {
-	{ .compatible = "marvell,armada-addr-decoding-controller" },
-	{ /* end of list */ },
-};
-
-static void __iomem *
-armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
-{
-	unsigned int offset;
-
-	/* The register layout is a bit annoying and the below code
-	 * tries to cope with it.
-	 * - At offset 0x0, there are the registers for the first 8
-	 *   windows, with 4 registers of 32 bits per window (ctrl,
-	 *   base, remap low, remap high)
-	 * - Then at offset 0x80, there is a hole of 0x10 bytes for
-	 *   the internal registers base address and internal units
-	 *   sync barrier register.
-	 * - Then at offset 0x90, there the registers for 12
-	 *   windows, with only 2 registers of 32 bits per window
-	 *   (ctrl, base).
-	 */
-	if (win < 8)
-		offset = (win << 4);
-	else
-		offset = ARMADA_WINDOW_8_PLUS_OFFSET + ((win - 8) << 3);
-
-	return cfg->bridge_virt_base + offset;
-}
-
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
-	.num_wins = 20,
-	.remappable_wins = 8,
-	.win_cfg_base = armada_cfg_base,
-};
-
-static int __init armada_setup_cpu_mbus(void)
-{
-	struct device_node *np;
-	void __iomem *mbus_unit_addr_decoding_base;
-	void __iomem *sdram_addr_decoding_base;
-
-	np = of_find_matching_node(NULL, of_addr_decoding_controller_table);
-	if (!np)
-		return -ENODEV;
-
-	mbus_unit_addr_decoding_base = of_iomap(np, 0);
-	BUG_ON(!mbus_unit_addr_decoding_base);
-
-	sdram_addr_decoding_base =
-		mbus_unit_addr_decoding_base +
-		ARMADA_SDRAM_ADDR_DECODING_OFFSET;
-
-	addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base;
-
-	if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"))
-		addr_map_cfg.hw_io_coherency = 1;
-
-	/*
-	 * Disable, clear and configure windows.
-	 */
-	if (of_machine_is_compatible("marvell,armadaxp"))
-		orion_config_wins(&addr_map_cfg, armada_xp_addr_map_info);
-	else if (of_machine_is_compatible("marvell,armada370"))
-		orion_config_wins(&addr_map_cfg, armada_370_addr_map_info);
-	else {
-		pr_err("Unsupported SoC\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * Setup MBUS dram target info.
-	 */
-	orion_setup_cpu_mbus_target(&addr_map_cfg,
-				    sdram_addr_decoding_base);
-	return 0;
-}
-
-/* Using a early_initcall is needed so that this initialization gets
- * done before the SMP initialization, which requires the BootROM to
- * be remapped. */
-early_initcall(armada_setup_cpu_mbus);

arch/arm/mach-mvebu/armada-370-xp.c

@@ -19,6 +19,7 @@
 #include <linux/time-armada-370-xp.h>
 #include <linux/clk/mvebu.h>
 #include <linux/dma-mapping.h>
+#include <linux/mbus.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -48,12 +49,29 @@ void __init armada_370_xp_timer_and_clk_init(void)
 
 void __init armada_370_xp_init_early(void)
 {
+	char *mbus_soc_name;
+
 	/*
 	 * Some Armada 370/XP devices allocate their coherent buffers
 	 * from atomic context. Increase size of atomic coherent pool
 	 * to make sure such the allocations won't fail.
 	 */
 	init_dma_coherent_pool_size(SZ_1M);
+
+	/*
+	 * This initialization will be replaced by a DT-based
+	 * initialization once the mvebu-mbus driver gains DT support.
+	 */
+	if (of_machine_is_compatible("marvell,armada370"))
+		mbus_soc_name = "marvell,armada370-mbus";
+	else
+		mbus_soc_name = "marvell,armadaxp-mbus";
+
+	mvebu_mbus_init(mbus_soc_name,
+			ARMADA_370_XP_MBUS_WINS_BASE,
+			ARMADA_370_XP_MBUS_WINS_SIZE,
+			ARMADA_370_XP_SDRAM_WINS_BASE,
+			ARMADA_370_XP_SDRAM_WINS_SIZE);
 }
 
 static void __init armada_370_xp_dt_init(void)

arch/arm/mach-mvebu/armada-370-xp.h

@@ -16,9 +16,15 @@
 #define __MACH_ARMADA_370_XP_H
 
 #define ARMADA_370_XP_REGS_PHYS_BASE	0xd0000000
-#define ARMADA_370_XP_REGS_VIRT_BASE	IOMEM(0xfeb00000)
+#define ARMADA_370_XP_REGS_VIRT_BASE	IOMEM(0xfec00000)
 #define ARMADA_370_XP_REGS_SIZE		SZ_1M
 
+/* These defines can go away once mvebu-mbus has a DT binding */
+#define ARMADA_370_XP_MBUS_WINS_BASE    (ARMADA_370_XP_REGS_PHYS_BASE + 0x20000)
+#define ARMADA_370_XP_MBUS_WINS_SIZE    0x100
+#define ARMADA_370_XP_SDRAM_WINS_BASE   (ARMADA_370_XP_REGS_PHYS_BASE + 0x20180)
+#define ARMADA_370_XP_SDRAM_WINS_SIZE   0x20
+
 #ifdef CONFIG_SMP
 #include <linux/cpumask.h>
 

arch/arm/mach-mvebu/irq-armada-370-xp.c

@@ -44,6 +44,8 @@
 
 #define ARMADA_370_XP_MAX_PER_CPU_IRQS		(28)
 
+#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ	(5)
+
 #define ACTIVE_DOORBELLS			(8)
 
 static DEFINE_RAW_SPINLOCK(irq_controller_lock);
@@ -59,36 +61,26 @@ static struct irq_domain *armada_370_xp_mpic_domain;
  */
 static void armada_370_xp_irq_mask(struct irq_data *d)
 {
-#ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
 		writel(hwirq, main_int_base +
 				ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
 	else
 		writel(hwirq, per_cpu_int_base +
 				ARMADA_370_XP_INT_SET_MASK_OFFS);
-#else
-	writel(irqd_to_hwirq(d),
-	       per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS);
-#endif
 }
 
 static void armada_370_xp_irq_unmask(struct irq_data *d)
 {
-#ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
 		writel(hwirq, main_int_base +
 				ARMADA_370_XP_INT_SET_ENABLE_OFFS);
 	else
 		writel(hwirq, per_cpu_int_base +
 				ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
-#else
-	writel(irqd_to_hwirq(d),
-	       per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
-#endif
 }
 
 #ifdef CONFIG_SMP
@@ -144,10 +136,14 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
 				      unsigned int virq, irq_hw_number_t hw)
 {
 	armada_370_xp_irq_mask(irq_get_irq_data(virq));
-	writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
+	if (hw != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
+		writel(hw, per_cpu_int_base +
+			ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+	else
+		writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
 	irq_set_status_flags(virq, IRQ_LEVEL);
 
-	if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) {
+	if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {
 		irq_set_percpu_devid(virq);
 		irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
 					handle_percpu_devid_irq);

arch/arm/mach-mvebu/platsmp.c

@@ -21,6 +21,7 @@
 #include <linux/smp.h>
 #include <linux/clk.h>
 #include <linux/of.h>
+#include <linux/mbus.h>
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include "common.h"
@@ -109,6 +110,7 @@ void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
 	set_secondary_cpus_clock();
 	flush_cache_all();
 	set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+	mvebu_mbus_add_window("bootrom", 0xfff00000, SZ_1M);
 }
 
 struct smp_operations armada_xp_smp_ops __initdata = {

arch/arm/mach-orion5x/Makefile

-obj-y				+= common.o addr-map.o pci.o irq.o mpp.o
+obj-y				+= common.o pci.o irq.o mpp.o
 obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
 obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o

arch/arm/mach-orion5x/addr-map.c

-/*
- * arch/arm/mach-orion5x/addr-map.c
- *
- * Address map functions for Marvell Orion 5x SoCs
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-/*
- * The Orion has fully programmable address map. There's a separate address
- * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB,
- * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
- * address decode windows that allow it to access any of the Orion resources.
- *
- * CPU address decoding --
- * Linux assumes that it is the boot loader that already setup the access to
- * DDR and internal registers.
- * Setup access to PCI and PCIe IO/MEM space is issued by this file.
- * Setup access to various devices located on the device bus interface (e.g.
- * flashes, RTC, etc) should be issued by machine-setup.c according to
- * specific board population (by using orion5x_setup_*_win()).
- *
- * Non-CPU Masters address decoding --
- * Unlike the CPU, we setup the access from Orion's master interfaces to DDR
- * banks only (the typical use case).
- * Setup access for each master to DDR is issued by platform device setup.
- */
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DEV_BUS		1
-#define TARGET_PCI		3
-#define TARGET_PCIE		4
-#define TARGET_SRAM		9
-#define ATTR_PCIE_MEM		0x59
-#define ATTR_PCIE_IO		0x51
-#define ATTR_PCIE_WA		0x79
-#define ATTR_PCI_MEM		0x59
-#define ATTR_PCI_IO		0x51
-#define ATTR_DEV_CS0		0x1e
-#define ATTR_DEV_CS1		0x1d
-#define ATTR_DEV_CS2		0x1b
-#define ATTR_DEV_BOOT		0xf
-#define ATTR_SRAM		0x0
-
-static int __initdata win_alloc_count;
-
-static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
-		  const int win)
-{
-	u32 dev, rev;
-
-	orion5x_pcie_id(&dev, &rev);
-	if ((dev == MV88F5281_DEV_ID && win < 4)
-	    || (dev == MV88F5182_DEV_ID && win < 2)
-	    || (dev == MV88F5181_DEV_ID && win < 2)
-	    || (dev == MV88F6183_DEV_ID && win < 4))
-		return 1;
-
-	return 0;
-}
-
-/*
- * Description of the windows needed by the platform code
- */
-static struct orion_addr_map_cfg addr_map_cfg __initdata = {
-	.num_wins = 8,
-	.cpu_win_can_remap = cpu_win_can_remap,
-	.bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE,
-};
-
-static const struct __initdata orion_addr_map_info addr_map_info[] = {
-	/*
-	 * Setup windows for PCI+PCIe IO+MEM space.
-	 */
-	{ 0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE,
-	  TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE
-	},
-	{ 1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE,
-	  TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE
-	},
-	{ 2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE,
-	  TARGET_PCIE, ATTR_PCIE_MEM, -1
-	},
-	{ 3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
-	  TARGET_PCI, ATTR_PCI_MEM, -1
-	},
-	/* End marker */
-	{ -1, 0, 0, 0, 0, 0 }
-};
-
-void __init orion5x_setup_cpu_mbus_bridge(void)
-{
-	/*
-	 * Disable, clear and configure windows.
-	 */
-	orion_config_wins(&addr_map_cfg, addr_map_info);
-	win_alloc_count = 4;
-
-	/*
-	 * Setup MBUS dram target info.
-	 */
-	orion_setup_cpu_mbus_target(&addr_map_cfg,
-				    (void __iomem *) ORION5X_DDR_WINDOW_CPU_BASE);
-}
-
-void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
-{
-	orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
-			    TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
-}
-
-void __init orion5x_setup_dev0_win(u32 base, u32 size)
-{
-	orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
-			    TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
-}
-
-void __init orion5x_setup_dev1_win(u32 base, u32 size)
-{
-	orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
-			    TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
-}
-
-void __init orion5x_setup_dev2_win(u32 base, u32 size)
-{
-	orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
-			    TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
-}
-
-void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
-{
-	orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
-			    TARGET_PCIE, ATTR_PCIE_WA, -1);
-}
-
-void __init orion5x_setup_sram_win(void)
-{
-	orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++,
-			    ORION5X_SRAM_PHYS_BASE, ORION5X_SRAM_SIZE,
-			    TARGET_SRAM, ATTR_SRAM, -1);
-}

arch/arm/mach-orion5x/board-dt.c

@@ -41,7 +41,7 @@ static void __init orion5x_dt_init(void)
 	/*
 	 * Setup Orion address map
 	 */
-	orion5x_setup_cpu_mbus_bridge();
+	orion5x_setup_wins();
 
 	/* Setup root of clk tree */
 	clk_init();

arch/arm/mach-orion5x/common.c

@@ -34,7 +34,6 @@
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/time.h>
 #include <plat/common.h>
-#include <plat/addr-map.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -174,7 +173,8 @@ void __init orion5x_xor_init(void)
  ****************************************************************************/
 static void __init orion5x_crypto_init(void)
 {
-	orion5x_setup_sram_win();
+	mvebu_mbus_add_window("sram", ORION5X_SRAM_PHYS_BASE,
+			      ORION5X_SRAM_SIZE);
 	orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE,
 			  SZ_8K, IRQ_ORION5X_CESA);
 }
@@ -193,6 +193,9 @@ void __init orion5x_wdt_init(void)
  ****************************************************************************/
 void __init orion5x_init_early(void)
 {
+	u32 rev, dev;
+	const char *mbus_soc_name;
+
 	orion_time_set_base(TIMER_VIRT_BASE);
 
 	/*
@@ -201,6 +204,46 @@ void __init orion5x_init_early(void)
 	 * the allocations won't fail.
 	 */
 	init_dma_coherent_pool_size(SZ_1M);
+
+	/* Initialize the MBUS driver */
+	orion5x_pcie_id(&dev, &rev);
+	if (dev == MV88F5281_DEV_ID)
+		mbus_soc_name = "marvell,orion5x-88f5281-mbus";
+	else if (dev == MV88F5182_DEV_ID)
+		mbus_soc_name = "marvell,orion5x-88f5182-mbus";
+	else if (dev == MV88F5181_DEV_ID)
+		mbus_soc_name = "marvell,orion5x-88f5181-mbus";
+	else if (dev == MV88F6183_DEV_ID)
+		mbus_soc_name = "marvell,orion5x-88f6183-mbus";
+	else
+		mbus_soc_name = NULL;
+	mvebu_mbus_init(mbus_soc_name, ORION5X_BRIDGE_WINS_BASE,
+			ORION5X_BRIDGE_WINS_SZ,
+			ORION5X_DDR_WINS_BASE, ORION5X_DDR_WINS_SZ);
+}
+
+void orion5x_setup_wins(void)
+{
+	/*
+	 * The PCIe windows will no longer be statically allocated
+	 * here once Orion5x is migrated to the pci-mvebu driver.
+	 */
+	mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_IO_PHYS_BASE,
+					  ORION5X_PCIE_IO_SIZE,
+					  ORION5X_PCIE_IO_BUS_BASE,
+					  MVEBU_MBUS_PCI_IO);
+	mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_MEM_PHYS_BASE,
+					  ORION5X_PCIE_MEM_SIZE,
+					  MVEBU_MBUS_NO_REMAP,
+					  MVEBU_MBUS_PCI_MEM);
+	mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_IO_PHYS_BASE,
+					  ORION5X_PCI_IO_SIZE,
+					  ORION5X_PCI_IO_BUS_BASE,
+					  MVEBU_MBUS_PCI_IO);
+	mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_MEM_PHYS_BASE,
+					  ORION5X_PCI_MEM_SIZE,
+					  MVEBU_MBUS_NO_REMAP,
+					  MVEBU_MBUS_PCI_MEM);
 }
 
 int orion5x_tclk;
@@ -282,7 +325,7 @@ void __init orion5x_init(void)
 	/*
 	 * Setup Orion address map
 	 */
-	orion5x_setup_cpu_mbus_bridge();
+	orion5x_setup_wins();
 
 	/* Setup root of clk tree */
 	clk_init();

arch/arm/mach-orion5x/common.h

@@ -17,18 +17,7 @@ void clk_init(void);
 extern int orion5x_tclk;
 extern void orion5x_timer_init(void);
 
-/*
- * Enumerations and functions for Orion windows mapping. Used by Orion core
- * functions to map its interfaces and by the machine-setup to map its on-
- * board devices. Details in /mach-orion/addr-map.c
- */
-void orion5x_setup_cpu_mbus_bridge(void);
-void orion5x_setup_dev_boot_win(u32 base, u32 size);
-void orion5x_setup_dev0_win(u32 base, u32 size);
-void orion5x_setup_dev1_win(u32 base, u32 size);
-void orion5x_setup_dev2_win(u32 base, u32 size);
-void orion5x_setup_pcie_wa_win(u32 base, u32 size);
-void orion5x_setup_sram_win(void);
+void orion5x_setup_wins(void);
 
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);

arch/arm/mach-orion5x/d2net-setup.c

@@ -317,8 +317,8 @@ static void __init d2net_init(void)
 	d2net_sata_power_init();
 	orion5x_sata_init(&d2net_sata_data);
 
-	orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE,
-				D2NET_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", D2NET_NOR_BOOT_BASE,
+			      D2NET_NOR_BOOT_SIZE);
 	platform_device_register(&d2net_nor_flash);
 
 	platform_device_register(&d2net_gpio_buttons);

arch/arm/mach-orion5x/db88f5281-setup.c

@@ -340,16 +340,19 @@ static void __init db88f5281_init(void)
 	orion5x_uart0_init();
 	orion5x_uart1_init();
 
-	orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
-				DB88F5281_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", DB88F5281_NOR_BOOT_BASE,
+			      DB88F5281_NOR_BOOT_SIZE);
 	platform_device_register(&db88f5281_boot_flash);
 
-	orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
+	mvebu_mbus_add_window("devbus-cs0", DB88F5281_7SEG_BASE,
+			      DB88F5281_7SEG_SIZE);
 
-	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
+	mvebu_mbus_add_window("devbus-cs1", DB88F5281_NOR_BASE,
+			      DB88F5281_NOR_SIZE);
 	platform_device_register(&db88f5281_nor_flash);
 
-	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
+	mvebu_mbus_add_window("devbus-cs2", DB88F5281_NAND_BASE,
+			      DB88F5281_NAND_SIZE);
 	platform_device_register(&db88f5281_nand_flash);
 
 	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);

arch/arm/mach-orion5x/dns323-setup.c

@@ -611,7 +611,8 @@ static void __init dns323_init(void)
 	/* setup flash mapping
 	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
 	 */
-	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", DNS323_NOR_BOOT_BASE,
+			      DNS323_NOR_BOOT_SIZE);
 	platform_device_register(&dns323_nor_flash);
 
 	/* Sort out LEDs, Buttons and i2c devices */

arch/arm/mach-orion5x/edmini_v2-setup.c

@@ -154,8 +154,8 @@ void __init edmini_v2_init(void)
 	orion5x_ehci0_init();
 	orion5x_eth_init(&edmini_v2_eth_data);
 
-	orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE,
-				EDMINI_V2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", EDMINI_V2_NOR_BOOT_BASE,
+			      EDMINI_V2_NOR_BOOT_SIZE);
 	platform_device_register(&edmini_v2_nor_flash);
 
 	pr_notice("edmini_v2: USB device port, flash write and power-off "

arch/arm/mach-orion5x/include/mach/orion5x.h

@@ -66,8 +66,10 @@
  * Orion Registers Map
  ******************************************************************************/
 
+#define ORION5X_DDR_PHYS_BASE           (ORION5X_REGS_PHYS_BASE + 0x00000)
+#define  ORION5X_DDR_WINS_BASE          (ORION5X_DDR_PHYS_BASE + 0x1500)
+#define  ORION5X_DDR_WINS_SZ            (0x10)
 #define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x00000)
-#define  ORION5X_DDR_WINDOW_CPU_BASE    (ORION5X_DDR_VIRT_BASE + 0x1500)
 #define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE + 0x10000)
 #define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE + 0x10000)
 #define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE + (x))
@@ -81,6 +83,8 @@
 
 #define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE + 0x20000)
 #define ORION5X_BRIDGE_PHYS_BASE	(ORION5X_REGS_PHYS_BASE + 0x20000)
+#define  ORION5X_BRIDGE_WINS_BASE       (ORION5X_BRIDGE_PHYS_BASE)
+#define  ORION5X_BRIDGE_WINS_SZ         (0x80)
 
 #define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x30000)
 

arch/arm/mach-orion5x/kurobox_pro-setup.c

@@ -359,13 +359,13 @@ static void __init kurobox_pro_init(void)
 	orion5x_uart1_init();
 	orion5x_xor_init();
 
-	orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
-				   KUROBOX_PRO_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", KUROBOX_PRO_NOR_BOOT_BASE,
+			      KUROBOX_PRO_NOR_BOOT_SIZE);
 	platform_device_register(&kurobox_pro_nor_flash);
 
 	if (machine_is_kurobox_pro()) {
-		orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE,
-				       KUROBOX_PRO_NAND_SIZE);
+		mvebu_mbus_add_window("devbus-cs0", KUROBOX_PRO_NAND_BASE,
+				      KUROBOX_PRO_NAND_SIZE);
 		platform_device_register(&kurobox_pro_nand_flash);
 	}
 

arch/arm/mach-orion5x/ls-chl-setup.c

@@ -294,8 +294,8 @@ static void __init lschl_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	orion5x_setup_dev_boot_win(LSCHL_NOR_BOOT_BASE,
-				   LSCHL_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", LSCHL_NOR_BOOT_BASE,
+			      LSCHL_NOR_BOOT_SIZE);
 	platform_device_register(&lschl_nor_flash);
 
 	platform_device_register(&lschl_leds);

arch/arm/mach-orion5x/ls_hgl-setup.c

@@ -243,8 +243,8 @@ static void __init ls_hgl_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	orion5x_setup_dev_boot_win(LS_HGL_NOR_BOOT_BASE,
-				   LS_HGL_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", LS_HGL_NOR_BOOT_BASE,
+			      LS_HGL_NOR_BOOT_SIZE);
 	platform_device_register(&ls_hgl_nor_flash);
 
 	platform_device_register(&ls_hgl_button_device);

arch/arm/mach-orion5x/lsmini-setup.c

@@ -244,8 +244,8 @@ static void __init lsmini_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	orion5x_setup_dev_boot_win(LSMINI_NOR_BOOT_BASE,
-				   LSMINI_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", LSMINI_NOR_BOOT_BASE,
+			      LSMINI_NOR_BOOT_SIZE);
 	platform_device_register(&lsmini_nor_flash);
 
 	platform_device_register(&lsmini_button_device);

arch/arm/mach-orion5x/mss2-setup.c

@@ -241,7 +241,8 @@ static void __init mss2_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", MSS2_NOR_BOOT_BASE,
+			      MSS2_NOR_BOOT_SIZE);
 	platform_device_register(&mss2_nor_flash);
 
 	platform_device_register(&mss2_button_device);

arch/arm/mach-orion5x/mv2120-setup.c

@@ -204,7 +204,8 @@ static void __init mv2120_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", MV2120_NOR_BOOT_BASE,
+			      MV2120_NOR_BOOT_SIZE);
 	platform_device_register(&mv2120_nor_flash);
 
 	platform_device_register(&mv2120_button_device);

arch/arm/mach-orion5x/net2big-setup.c

@@ -397,8 +397,8 @@ static void __init net2big_init(void)
 	net2big_sata_power_init();
 	orion5x_sata_init(&net2big_sata_data);
 
-	orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE,
-				   NET2BIG_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", NET2BIG_NOR_BOOT_BASE,
+			      NET2BIG_NOR_BOOT_SIZE);
 	platform_device_register(&net2big_nor_flash);
 
 	platform_device_register(&net2big_gpio_buttons);

arch/arm/mach-orion5x/pci.c

@@ -157,8 +157,11 @@ static int __init pcie_setup(struct pci_sys_data *sys)
 	if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
 		printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
 				   "read transaction workaround\n");
-		orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
-					  ORION5X_PCIE_WA_SIZE);
+		mvebu_mbus_add_window_remap_flags("pcie0.0",
+						  ORION5X_PCIE_WA_PHYS_BASE,
+						  ORION5X_PCIE_WA_SIZE,
+						  MVEBU_MBUS_NO_REMAP,
+						  MVEBU_MBUS_PCI_WA);
 		pcie_ops.read = pcie_rd_conf_wa;
 	}
 
@@ -402,8 +405,9 @@ static void __init orion5x_pci_master_slave_enable(void)
 	orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7);
 }
 
-static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
+static void __init orion5x_setup_pci_wins(void)
 {
+	const struct mbus_dram_target_info *dram = mv_mbus_dram_info();
 	u32 win_enable;
 	int bus;
 	int i;
@@ -420,7 +424,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
 	bus = orion5x_pci_local_bus_nr();
 
 	for (i = 0; i < dram->num_cs; i++) {
-		struct mbus_dram_window *cs = dram->cs + i;
+		const struct mbus_dram_window *cs = dram->cs + i;
 		u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index);
 		u32 reg;
 		u32 val;
@@ -467,7 +471,7 @@ static int __init pci_setup(struct pci_sys_data *sys)
 	/*
 	 * Point PCI unit MBUS decode windows to DRAM space.
 	 */
-	orion5x_setup_pci_wins(&orion_mbus_dram_info);
+	orion5x_setup_pci_wins();
 
 	/*
 	 * Master + Slave enable

arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c

@@ -123,8 +123,8 @@ static void __init rd88f5181l_fxo_init(void)
 	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
-	orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
-				   RD88F5181L_FXO_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", RD88F5181L_FXO_NOR_BOOT_BASE,
+			      RD88F5181L_FXO_NOR_BOOT_SIZE);
 	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
 }
 

arch/arm/mach-orion5x/rd88f5181l-ge-setup.c

@@ -130,8 +130,8 @@ static void __init rd88f5181l_ge_init(void)
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
-	orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
-				   RD88F5181L_GE_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", RD88F5181L_GE_NOR_BOOT_BASE,
+			      RD88F5181L_GE_NOR_BOOT_SIZE);
 	platform_device_register(&rd88f5181l_ge_nor_boot_flash);
 
 	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);

arch/arm/mach-orion5x/rd88f5182-setup.c

@@ -264,10 +264,11 @@ static void __init rd88f5182_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
-				   RD88F5182_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", RD88F5182_NOR_BOOT_BASE,
+			      RD88F5182_NOR_BOOT_SIZE);
 
-	orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
+	mvebu_mbus_add_window("devbus-cs1", RD88F5182_NOR_BASE,
+			      RD88F5182_NOR_SIZE);
 	platform_device_register(&rd88f5182_nor_flash);
 	platform_device_register(&rd88f5182_gpio_leds);
 

arch/arm/mach-orion5x/terastation_pro2-setup.c

@@ -329,8 +329,8 @@ static void __init tsp2_init(void)
 	/*
 	 * Configure peripherals.
 	 */
-	orion5x_setup_dev_boot_win(TSP2_NOR_BOOT_BASE,
-				   TSP2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", TSP2_NOR_BOOT_BASE,
+			      TSP2_NOR_BOOT_SIZE);
 	platform_device_register(&tsp2_nor_flash);
 
 	orion5x_ehci0_init();

arch/arm/mach-orion5x/ts209-setup.c

@@ -286,8 +286,8 @@ static void __init qnap_ts209_init(void)
 	/*
 	 * Configure peripherals.
 	 */
-	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
-				   QNAP_TS209_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", QNAP_TS209_NOR_BOOT_BASE,
+			      QNAP_TS209_NOR_BOOT_SIZE);
 	platform_device_register(&qnap_ts209_nor_flash);
 
 	orion5x_ehci0_init();

arch/arm/mach-orion5x/ts409-setup.c

@@ -277,8 +277,8 @@ static void __init qnap_ts409_init(void)
 	/*
 	 * Configure peripherals.
 	 */
-	orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
-				   QNAP_TS409_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", QNAP_TS409_NOR_BOOT_BASE,
+			      QNAP_TS409_NOR_BOOT_SIZE);
 	platform_device_register(&qnap_ts409_nor_flash);
 
 	orion5x_ehci0_init();

arch/arm/mach-orion5x/wnr854t-setup.c

@@ -127,8 +127,8 @@ static void __init wnr854t_init(void)
 	orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
-	orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
-				   WNR854T_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", WNR854T_NOR_BOOT_BASE,
+			      WNR854T_NOR_BOOT_SIZE);
 	platform_device_register(&wnr854t_nor_flash);
 }
 

arch/arm/mach-orion5x/wrt350n-v2-setup.c

@@ -213,8 +213,8 @@ static void __init wrt350n_v2_init(void)
 	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
-	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
-				   WRT350N_V2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window("devbus-boot", WRT350N_V2_NOR_BOOT_BASE,
+			      WRT350N_V2_NOR_BOOT_SIZE);
 	platform_device_register(&wrt350n_v2_nor_flash);
 	platform_device_register(&wrt350n_v2_leds);
 	platform_device_register(&wrt350n_v2_button_device);

arch/arm/plat-orion/Makefile

@@ -3,8 +3,6 @@
 #
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
 
-obj-y                             += addr-map.o
-
 orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o
 obj-$(CONFIG_PLAT_ORION_LEGACY)   += irq.o pcie.o time.o common.o mpp.o
 obj-$(CONFIG_PLAT_ORION_LEGACY)   += $(orion-gpio-y)

arch/arm/plat-orion/addr-map.c

-/*
- * arch/arm/plat-orion/addr-map.c
- *
- * Address map functions for Marvell Orion based SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <plat/addr-map.h>
-
-struct mbus_dram_target_info orion_mbus_dram_info;
-
-const struct mbus_dram_target_info *mv_mbus_dram_info(void)
-{
-	return &orion_mbus_dram_info;
-}
-EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
-
-/*
- * DDR target is the same on all Orion platforms.
- */
-#define TARGET_DDR		0
-
-/*
- * Helpers to get DDR bank info
- */
-#define DDR_BASE_CS_OFF(n)	(0x0000 + ((n) << 3))
-#define DDR_SIZE_CS_OFF(n)	(0x0004 + ((n) << 3))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define WIN_CTRL_OFF		0x0000
-#define WIN_BASE_OFF		0x0004
-#define WIN_REMAP_LO_OFF	0x0008
-#define WIN_REMAP_HI_OFF	0x000c
-
-#define ATTR_HW_COHERENCY	(0x1 << 4)
-
-/*
- * Default implementation
- */
-static void __init __iomem *
-orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
-{
-	return cfg->bridge_virt_base + (win << 4);
-}
-
-/*
- * Default implementation
- */
-static int __init orion_cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
-					  const int win)
-{
-	if (win < cfg->remappable_wins)
-		return 1;
-
-	return 0;
-}
-
-void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
-				const int win, const u32 base,
-				const u32 size, const u8 target,
-				const u8 attr, const int remap)
-{
-	void __iomem *addr = cfg->win_cfg_base(cfg, win);
-	u32 ctrl, base_high, remap_addr;
-
-	if (win >= cfg->num_wins) {
-		printk(KERN_ERR "setup_cpu_win: trying to allocate window "
-		       "%d when only %d allowed\n", win, cfg->num_wins);
-	}
-
-	base_high = base & 0xffff0000;
-	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-
-	writel(base_high, addr + WIN_BASE_OFF);
-	writel(ctrl, addr + WIN_CTRL_OFF);
-	if (cfg->cpu_win_can_remap(cfg, win)) {
-		if (remap < 0)
-			remap_addr = base;
-		else
-			remap_addr = remap;
-		writel(remap_addr & 0xffff0000, addr + WIN_REMAP_LO_OFF);
-		writel(0, addr + WIN_REMAP_HI_OFF);
-	}
-}
-
-/*
- * Configure a number of windows.
- */
-static void __init orion_setup_cpu_wins(const struct orion_addr_map_cfg * cfg,
-					const struct orion_addr_map_info *info)
-{
-	while (info->win != -1) {
-		orion_setup_cpu_win(cfg, info->win, info->base, info->size,
-				    info->target, info->attr, info->remap);
-		info++;
-	}
-}
-
-static void __init orion_disable_wins(const struct orion_addr_map_cfg * cfg)
-{
-	void __iomem *addr;
-	int i;
-
-	for (i = 0; i < cfg->num_wins; i++) {
-		addr = cfg->win_cfg_base(cfg, i);
-
-		writel(0, addr + WIN_BASE_OFF);
-		writel(0, addr + WIN_CTRL_OFF);
-		if (cfg->cpu_win_can_remap(cfg, i)) {
-			writel(0, addr + WIN_REMAP_LO_OFF);
-			writel(0, addr + WIN_REMAP_HI_OFF);
-		}
-	}
-}
-
-/*
- * Disable, clear and configure windows.
- */
-void __init orion_config_wins(struct orion_addr_map_cfg * cfg,
-			      const struct orion_addr_map_info *info)
-{
-	if (!cfg->cpu_win_can_remap)
-		cfg->cpu_win_can_remap = orion_cpu_win_can_remap;
-
-	if (!cfg->win_cfg_base)
-		cfg->win_cfg_base = orion_win_cfg_base;
-
-	orion_disable_wins(cfg);
-
-	if (info)
-		orion_setup_cpu_wins(cfg, info);
-}
-
-/*
- * Setup MBUS dram target info.
- */
-void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
-					const void __iomem *ddr_window_cpu_base)
-{
-	int i;
-	int cs;
-
-	orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
-	for (i = 0, cs = 0; i < 4; i++) {
-		u32 base = readl(ddr_window_cpu_base + DDR_BASE_CS_OFF(i));
-		u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
-
-		/*
-		 * We only take care of entries for which the chip
-		 * select is enabled, and that don't have high base
-		 * address bits set (devices can only access the first
-		 * 32 bits of the memory).
-		 */
-		if ((size & 1) && !(base & 0xF)) {
-			struct mbus_dram_window *w;
-
-			w = &orion_mbus_dram_info.cs[cs++];
-			w->cs_index = i;
-			w->mbus_attr = 0xf & ~(1 << i);
-			if (cfg->hw_io_coherency)
-				w->mbus_attr |= ATTR_HW_COHERENCY;
-			w->base = base & 0xffff0000;
-			w->size = (size | 0x0000ffff) + 1;
-		}
-	}
-	orion_mbus_dram_info.num_cs = cs;
-}

arch/arm/plat-orion/gpio.c

@@ -439,6 +439,64 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 	}
 }
 
+#ifdef CONFIG_DEBUG_FS
+#include <linux/seq_file.h>
+
+static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct orion_gpio_chip *ochip =
+		container_of(chip, struct orion_gpio_chip, chip);
+	u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk;
+	int i;
+
+	out	= readl_relaxed(GPIO_OUT(ochip));
+	io_conf	= readl_relaxed(GPIO_IO_CONF(ochip));
+	blink	= readl_relaxed(GPIO_BLINK_EN(ochip));
+	in_pol	= readl_relaxed(GPIO_IN_POL(ochip));
+	data_in	= readl_relaxed(GPIO_DATA_IN(ochip));
+	cause	= readl_relaxed(GPIO_EDGE_CAUSE(ochip));
+	edg_msk	= readl_relaxed(GPIO_EDGE_MASK(ochip));
+	lvl_msk	= readl_relaxed(GPIO_LEVEL_MASK(ochip));
+
+	for (i = 0; i < chip->ngpio; i++) {
+		const char *label;
+		u32 msk;
+		bool is_out;
+
+		label = gpiochip_is_requested(chip, i);
+		if (!label)
+			continue;
+
+		msk = 1 << i;
+		is_out = !(io_conf & msk);
+
+		seq_printf(s, " gpio-%-3d (%-20.20s)", chip->base + i, label);
+
+		if (is_out) {
+			seq_printf(s, " out %s %s\n",
+				   out & msk ? "hi" : "lo",
+				   blink & msk ? "(blink )" : "");
+			continue;
+		}
+
+		seq_printf(s, " in  %s (act %s) - IRQ",
+			   (data_in ^ in_pol) & msk  ? "hi" : "lo",
+			   in_pol & msk ? "lo" : "hi");
+		if (!((edg_msk | lvl_msk) & msk)) {
+			seq_printf(s, " disabled\n");
+			continue;
+		}
+		if (edg_msk & msk)
+			seq_printf(s, " edge ");
+		if (lvl_msk & msk)
+			seq_printf(s, " level");
+		seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear  ");
+	}
+}
+#else
+#define orion_gpio_dbg_show NULL
+#endif
+
 void __init orion_gpio_init(struct device_node *np,
 			    int gpio_base, int ngpio,
 			    void __iomem *base, int mask_offset,
@@ -471,6 +529,7 @@ void __init orion_gpio_init(struct device_node *np,
 #ifdef CONFIG_OF
 	ochip->chip.of_node = np;
 #endif
+	ochip->chip.dbg_show = orion_gpio_dbg_show;
 
 	spin_lock_init(&ochip->lock);
 	ochip->base = (void __iomem *)base;

arch/arm/plat-orion/pcie.c

@@ -120,12 +120,14 @@ void __init orion_pcie_reset(void __iomem *base)
  * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
  * WIN[0-3] -> DRAM bank[0-3]
  */
-static void __init orion_pcie_setup_wins(void __iomem *base,
-					 struct mbus_dram_target_info *dram)
+static void __init orion_pcie_setup_wins(void __iomem *base)
 {
+	const struct mbus_dram_target_info *dram;
 	u32 size;
 	int i;
 
+	dram = mv_mbus_dram_info();
+
 	/*
 	 * First, disable and clear BARs and windows.
 	 */
@@ -150,7 +152,7 @@ static void __init orion_pcie_setup_wins(void __iomem *base,
 	 */
 	size = 0;
 	for (i = 0; i < dram->num_cs; i++) {
-		struct mbus_dram_window *cs = dram->cs + i;
+		const struct mbus_dram_window *cs = dram->cs + i;
 
 		writel(cs->base & 0xffff0000, base + PCIE_WIN04_BASE_OFF(i));
 		writel(0, base + PCIE_WIN04_REMAP_OFF(i));
@@ -184,7 +186,7 @@ void __init orion_pcie_setup(void __iomem *base)
 	/*
 	 * Point PCIe unit MBUS decode windows to DRAM space.
 	 */
-	orion_pcie_setup_wins(base, &orion_mbus_dram_info);
+	orion_pcie_setup_wins(base);
 
 	/*
 	 * Master + slave enable.

drivers/bus/Kconfig

@@ -4,6 +4,13 @@
 
 menu "Bus devices"
 
+config MVEBU_MBUS
+	bool
+	depends on PLAT_ORION
+	help
+	  Driver needed for the MBus configuration on Marvell EBU SoCs
+	  (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
+
 config OMAP_OCP2SCP
 	tristate "OMAP OCP2SCP DRIVER"
 	depends on ARCH_OMAP2PLUS

drivers/bus/Makefile

@@ -2,6 +2,7 @@
 # Makefile for the bus drivers.
 #
 
+obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
 obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
 
 # Interconnect bus driver for OMAP SoCs.

drivers/bus/mvebu-mbus.c

+/*
+ * Address map functions for Marvell EBU SoCs (Kirkwood, Armada
+ * 370/XP, Dove, Orion5x and MV78xx0)
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Marvell EBU SoCs have a configurable physical address space:
+ * the physical address at which certain devices (PCIe, NOR, NAND,
+ * etc.) sit can be configured. The configuration takes place through
+ * two sets of registers:
+ *
+ * - One to configure the access of the CPU to the devices. Depending
+ *   on the families, there are between 8 and 20 configurable windows,
+ *   each can be use to create a physical memory window that maps to a
+ *   specific device. Devices are identified by a tuple (target,
+ *   attribute).
+ *
+ * - One to configure the access to the CPU to the SDRAM. There are
+ *   either 2 (for Dove) or 4 (for other families) windows to map the
+ *   SDRAM into the physical address space.
+ *
+ * This driver:
+ *
+ * - Reads out the SDRAM address decoding windows at initialization
+ *   time, and fills the mvebu_mbus_dram_info structure with these
+ *   informations. The exported function mv_mbus_dram_info() allow
+ *   device drivers to get those informations related to the SDRAM
+ *   address decoding windows. This is because devices also have their
+ *   own windows (configured through registers that are part of each
+ *   device register space), and therefore the drivers for Marvell
+ *   devices have to configure those device -> SDRAM windows to ensure
+ *   that DMA works properly.
+ *
+ * - Provides an API for platform code or device drivers to
+ *   dynamically add or remove address decoding windows for the CPU ->
+ *   device accesses. This API is mvebu_mbus_add_window(),
+ *   mvebu_mbus_add_window_remap_flags() and
+ *   mvebu_mbus_del_window(). Since the (target, attribute) values
+ *   differ from one SoC family to another, the API uses a 'const char
+ *   *' string to identify devices, and this driver is responsible for
+ *   knowing the mapping between the name of a device and its
+ *   corresponding (target, attribute) in the current SoC family.
+ *
+ * - Provides a debugfs interface in /sys/kernel/debug/mvebu-mbus/ to
+ *   see the list of CPU -> SDRAM windows and their configuration
+ *   (file 'sdram') and the list of CPU -> devices windows and their
+ *   configuration (file 'devices').
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/debugfs.h>
+
+/*
+ * DDR target is the same on all platforms.
+ */
+#define TARGET_DDR		0
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_CTRL_OFF		0x0000
+#define   WIN_CTRL_ENABLE       BIT(0)
+#define   WIN_CTRL_TGT_MASK     0xf0
+#define   WIN_CTRL_TGT_SHIFT    4
+#define   WIN_CTRL_ATTR_MASK    0xff00
+#define   WIN_CTRL_ATTR_SHIFT   8
+#define   WIN_CTRL_SIZE_MASK    0xffff0000
+#define   WIN_CTRL_SIZE_SHIFT   16
+#define WIN_BASE_OFF		0x0004
+#define   WIN_BASE_LOW          0xffff0000
+#define   WIN_BASE_HIGH         0xf
+#define WIN_REMAP_LO_OFF	0x0008
+#define   WIN_REMAP_LOW         0xffff0000
+#define WIN_REMAP_HI_OFF	0x000c
+
+#define ATTR_HW_COHERENCY	(0x1 << 4)
+
+#define DDR_BASE_CS_OFF(n)	(0x0000 + ((n) << 3))
+#define  DDR_BASE_CS_HIGH_MASK  0xf
+#define  DDR_BASE_CS_LOW_MASK   0xff000000
+#define DDR_SIZE_CS_OFF(n)	(0x0004 + ((n) << 3))
+#define  DDR_SIZE_ENABLED       BIT(0)
+#define  DDR_SIZE_CS_MASK       0x1c
+#define  DDR_SIZE_CS_SHIFT      2
+#define  DDR_SIZE_MASK          0xff000000
+
+#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4)
+
+struct mvebu_mbus_mapping {
+	const char *name;
+	u8 target;
+	u8 attr;
+	u8 attrmask;
+};
+
+/*
+ * Masks used for the 'attrmask' field of mvebu_mbus_mapping. They
+ * allow to get the real attribute value, discarding the special bits
+ * used to select a PCI MEM region or a PCI WA region. This allows the
+ * debugfs code to reverse-match the name of a device from its
+ * target/attr values.
+ *
+ * For all devices except PCI, all bits of 'attr' must be
+ * considered. For most SoCs, only bit 3 should be ignored (it allows
+ * to select between PCI MEM and PCI I/O). On Orion5x however, there
+ * is the special bit 5 to select a PCI WA region.
+ */
+#define MAPDEF_NOMASK       0xff
+#define MAPDEF_PCIMASK      0xf7
+#define MAPDEF_ORIONPCIMASK 0xd7
+
+/* Macro used to define one mvebu_mbus_mapping entry */
+#define MAPDEF(__n, __t, __a, __m) \
+	{ .name = __n, .target = __t, .attr = __a, .attrmask = __m }
+
+struct mvebu_mbus_state;
+
+struct mvebu_mbus_soc_data {
+	unsigned int num_wins;
+	unsigned int num_remappable_wins;
+	unsigned int (*win_cfg_offset)(const int win);
+	void (*setup_cpu_target)(struct mvebu_mbus_state *s);
+	int (*show_cpu_target)(struct mvebu_mbus_state *s,
+			       struct seq_file *seq, void *v);
+	const struct mvebu_mbus_mapping *map;
+};
+
+struct mvebu_mbus_state {
+	void __iomem *mbuswins_base;
+	void __iomem *sdramwins_base;
+	struct dentry *debugfs_root;
+	struct dentry *debugfs_sdram;
+	struct dentry *debugfs_devs;
+	const struct mvebu_mbus_soc_data *soc;
+	int hw_io_coherency;
+};
+
+static struct mvebu_mbus_state mbus_state;
+
+static struct mbus_dram_target_info mvebu_mbus_dram_info;
+const struct mbus_dram_target_info *mv_mbus_dram_info(void)
+{
+	return &mvebu_mbus_dram_info;
+}
+EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
+
+/*
+ * Functions to manipulate the address decoding windows
+ */
+
+static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus,
+				   int win, int *enabled, u64 *base,
+				   u32 *size, u8 *target, u8 *attr,
+				   u64 *remap)
+{
+	void __iomem *addr = mbus->mbuswins_base +
+		mbus->soc->win_cfg_offset(win);
+	u32 basereg = readl(addr + WIN_BASE_OFF);
+	u32 ctrlreg = readl(addr + WIN_CTRL_OFF);
+
+	if (!(ctrlreg & WIN_CTRL_ENABLE)) {
+		*enabled = 0;
+		return;
+	}
+
+	*enabled = 1;
+	*base = ((u64)basereg & WIN_BASE_HIGH) << 32;
+	*base |= (basereg & WIN_BASE_LOW);
+	*size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1;
+
+	if (target)
+		*target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT;
+
+	if (attr)
+		*attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT;
+
+	if (remap) {
+		if (win < mbus->soc->num_remappable_wins) {
+			u32 remap_low = readl(addr + WIN_REMAP_LO_OFF);
+			u32 remap_hi  = readl(addr + WIN_REMAP_HI_OFF);
+			*remap = ((u64)remap_hi << 32) | remap_low;
+		} else
+			*remap = 0;
+	}
+}
+
+static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus,
+				      int win)
+{
+	void __iomem *addr;
+
+	addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win);
+
+	writel(0, addr + WIN_BASE_OFF);
+	writel(0, addr + WIN_CTRL_OFF);
+	if (win < mbus->soc->num_remappable_wins) {
+		writel(0, addr + WIN_REMAP_LO_OFF);
+		writel(0, addr + WIN_REMAP_HI_OFF);
+	}
+}
+
+/* Checks whether the given window number is available */
+static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus,
+				     const int win)
+{
+	void __iomem *addr = mbus->mbuswins_base +
+		mbus->soc->win_cfg_offset(win);
+	u32 ctrl = readl(addr + WIN_CTRL_OFF);
+	return !(ctrl & WIN_CTRL_ENABLE);
+}
+
+/*
+ * Checks whether the given (base, base+size) area doesn't overlap an
+ * existing region
+ */
+static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus,
+				       phys_addr_t base, size_t size,
+				       u8 target, u8 attr)
+{
+	u64 end = (u64)base + size;
+	int win;
+
+	for (win = 0; win < mbus->soc->num_wins; win++) {
+		u64 wbase, wend;
+		u32 wsize;
+		u8 wtarget, wattr;
+		int enabled;
+
+		mvebu_mbus_read_window(mbus, win,
+				       &enabled, &wbase, &wsize,
+				       &wtarget, &wattr, NULL);
+
+		if (!enabled)
+			continue;
+
+		wend = wbase + wsize;
+
+		/*
+		 * Check if the current window overlaps with the
+		 * proposed physical range
+		 */
+		if ((u64)base < wend && end > wbase)
+			return 0;
+
+		/*
+		 * Check if target/attribute conflicts
+		 */
+		if (target == wtarget && attr == wattr)
+			return 0;
+	}
+
+	return 1;
+}
+
+static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus,
+				  phys_addr_t base, size_t size)
+{
+	int win;
+
+	for (win = 0; win < mbus->soc->num_wins; win++) {
+		u64 wbase;
+		u32 wsize;
+		int enabled;
+
+		mvebu_mbus_read_window(mbus, win,
+				       &enabled, &wbase, &wsize,
+				       NULL, NULL, NULL);
+
+		if (!enabled)
+			continue;
+
+		if (base == wbase && size == wsize)
+			return win;
+	}
+
+	return -ENODEV;
+}
+
+static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus,
+				   int win, phys_addr_t base, size_t size,
+				   phys_addr_t remap, u8 target,
+				   u8 attr)
+{
+	void __iomem *addr = mbus->mbuswins_base +
+		mbus->soc->win_cfg_offset(win);
+	u32 ctrl, remap_addr;
+
+	ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
+		(attr << WIN_CTRL_ATTR_SHIFT)    |
+		(target << WIN_CTRL_TGT_SHIFT)   |
+		WIN_CTRL_ENABLE;
+
+	writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF);
+	writel(ctrl, addr + WIN_CTRL_OFF);
+	if (win < mbus->soc->num_remappable_wins) {
+		if (remap == MVEBU_MBUS_NO_REMAP)
+			remap_addr = base;
+		else
+			remap_addr = remap;
+		writel(remap_addr & WIN_REMAP_LOW, addr + WIN_REMAP_LO_OFF);
+		writel(0, addr + WIN_REMAP_HI_OFF);
+	}
+
+	return 0;
+}
+
+static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus,
+				   phys_addr_t base, size_t size,
+				   phys_addr_t remap, u8 target,
+				   u8 attr)
+{
+	int win;
+
+	if (remap == MVEBU_MBUS_NO_REMAP) {
+		for (win = mbus->soc->num_remappable_wins;
+		     win < mbus->soc->num_wins; win++)
+			if (mvebu_mbus_window_is_free(mbus, win))
+				return mvebu_mbus_setup_window(mbus, win, base,
+							       size, remap,
+							       target, attr);
+	}
+
+
+	for (win = 0; win < mbus->soc->num_wins; win++)
+		if (mvebu_mbus_window_is_free(mbus, win))
+			return mvebu_mbus_setup_window(mbus, win, base, size,
+						       remap, target, attr);
+
+	return -ENOMEM;
+}
+
+/*
+ * Debugfs debugging
+ */
+
+/* Common function used for Dove, Kirkwood, Armada 370/XP and Orion 5x */
+static int mvebu_sdram_debug_show_orion(struct mvebu_mbus_state *mbus,
+					struct seq_file *seq, void *v)
+{
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		u32 basereg = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+		u32 sizereg = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
+		u64 base;
+		u32 size;
+
+		if (!(sizereg & DDR_SIZE_ENABLED)) {
+			seq_printf(seq, "[%d] disabled\n", i);
+			continue;
+		}
+
+		base = ((u64)basereg & DDR_BASE_CS_HIGH_MASK) << 32;
+		base |= basereg & DDR_BASE_CS_LOW_MASK;
+		size = (sizereg | ~DDR_SIZE_MASK);
+
+		seq_printf(seq, "[%d] %016llx - %016llx : cs%d\n",
+			   i, (unsigned long long)base,
+			   (unsigned long long)base + size + 1,
+			   (sizereg & DDR_SIZE_CS_MASK) >> DDR_SIZE_CS_SHIFT);
+	}
+
+	return 0;
+}
+
+/* Special function for Dove */
+static int mvebu_sdram_debug_show_dove(struct mvebu_mbus_state *mbus,
+				       struct seq_file *seq, void *v)
+{
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i));
+		u64 base;
+		u32 size;
+
+		if (!(map & 1)) {
+			seq_printf(seq, "[%d] disabled\n", i);
+			continue;
+		}
+
+		base = map & 0xff800000;
+		size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
+
+		seq_printf(seq, "[%d] %016llx - %016llx : cs%d\n",
+			   i, (unsigned long long)base,
+			   (unsigned long long)base + size, i);
+	}
+
+	return 0;
+}
+
+static int mvebu_sdram_debug_show(struct seq_file *seq, void *v)
+{
+	struct mvebu_mbus_state *mbus = &mbus_state;
+	return mbus->soc->show_cpu_target(mbus, seq, v);
+}
+
+static int mvebu_sdram_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mvebu_sdram_debug_show, inode->i_private);
+}
+
+static const struct file_operations mvebu_sdram_debug_fops = {
+	.open = mvebu_sdram_debug_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static int mvebu_devs_debug_show(struct seq_file *seq, void *v)
+{
+	struct mvebu_mbus_state *mbus = &mbus_state;
+	int win;
+
+	for (win = 0; win < mbus->soc->num_wins; win++) {
+		u64 wbase, wremap;
+		u32 wsize;
+		u8 wtarget, wattr;
+		int enabled, i;
+		const char *name;
+
+		mvebu_mbus_read_window(mbus, win,
+				       &enabled, &wbase, &wsize,
+				       &wtarget, &wattr, &wremap);
+
+		if (!enabled) {
+			seq_printf(seq, "[%02d] disabled\n", win);
+			continue;
+		}
+
+
+		for (i = 0; mbus->soc->map[i].name; i++)
+			if (mbus->soc->map[i].target == wtarget &&
+			    mbus->soc->map[i].attr ==
+			    (wattr & mbus->soc->map[i].attrmask))
+				break;
+
+		name = mbus->soc->map[i].name ?: "unknown";
+
+		seq_printf(seq, "[%02d] %016llx - %016llx : %s",
+			   win, (unsigned long long)wbase,
+			   (unsigned long long)(wbase + wsize), name);
+
+		if (win < mbus->soc->num_remappable_wins) {
+			seq_printf(seq, " (remap %016llx)\n",
+				   (unsigned long long)wremap);
+		} else
+			seq_printf(seq, "\n");
+	}
+
+	return 0;
+}
+
+static int mvebu_devs_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mvebu_devs_debug_show, inode->i_private);
+}
+
+static const struct file_operations mvebu_devs_debug_fops = {
+	.open = mvebu_devs_debug_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+/*
+ * SoC-specific functions and definitions
+ */
+
+static unsigned int orion_mbus_win_offset(int win)
+{
+	return win << 4;
+}
+
+static unsigned int armada_370_xp_mbus_win_offset(int win)
+{
+	/* The register layout is a bit annoying and the below code
+	 * tries to cope with it.
+	 * - At offset 0x0, there are the registers for the first 8
+	 *   windows, with 4 registers of 32 bits per window (ctrl,
+	 *   base, remap low, remap high)
+	 * - Then at offset 0x80, there is a hole of 0x10 bytes for
+	 *   the internal registers base address and internal units
+	 *   sync barrier register.
+	 * - Then at offset 0x90, there the registers for 12
+	 *   windows, with only 2 registers of 32 bits per window
+	 *   (ctrl, base).
+	 */
+	if (win < 8)
+		return win << 4;
+	else
+		return 0x90 + ((win - 8) << 3);
+}
+
+static unsigned int mv78xx0_mbus_win_offset(int win)
+{
+	if (win < 8)
+		return win << 4;
+	else
+		return 0x900 + ((win - 8) << 4);
+}
+
+static void __init
+mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
+{
+	int i;
+	int cs;
+
+	mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+	for (i = 0, cs = 0; i < 4; i++) {
+		u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+		u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
+
+		/*
+		 * We only take care of entries for which the chip
+		 * select is enabled, and that don't have high base
+		 * address bits set (devices can only access the first
+		 * 32 bits of the memory).
+		 */
+		if ((size & DDR_SIZE_ENABLED) &&
+		    !(base & DDR_BASE_CS_HIGH_MASK)) {
+			struct mbus_dram_window *w;
+
+			w = &mvebu_mbus_dram_info.cs[cs++];
+			w->cs_index = i;
+			w->mbus_attr = 0xf & ~(1 << i);
+			if (mbus->hw_io_coherency)
+				w->mbus_attr |= ATTR_HW_COHERENCY;
+			w->base = base & DDR_BASE_CS_LOW_MASK;
+			w->size = (size | ~DDR_SIZE_MASK) + 1;
+		}
+	}
+	mvebu_mbus_dram_info.num_cs = cs;
+}
+
+static void __init
+mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus)
+{
+	int i;
+	int cs;
+
+	mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+	for (i = 0, cs = 0; i < 2; i++) {
+		u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i));
+
+		/*
+		 * Chip select enabled?
+		 */
+		if (map & 1) {
+			struct mbus_dram_window *w;
+
+			w = &mvebu_mbus_dram_info.cs[cs++];
+			w->cs_index = i;
+			w->mbus_attr = 0; /* CS address decoding done inside */
+					  /* the DDR controller, no need to  */
+					  /* provide attributes */
+			w->base = map & 0xff800000;
+			w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
+		}
+	}
+
+	mvebu_mbus_dram_info.num_cs = cs;
+}
+
+static const struct mvebu_mbus_mapping armada_370_map[] = {
+	MAPDEF("bootrom",     1, 0xe0, MAPDEF_NOMASK),
+	MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK),
+	MAPDEF("devbus-cs0",  1, 0x3e, MAPDEF_NOMASK),
+	MAPDEF("devbus-cs1",  1, 0x3d, MAPDEF_NOMASK),
+	MAPDEF("devbus-cs2",  1, 0x3b, MAPDEF_NOMASK),
+	MAPDEF("devbus-cs3",  1, 0x37, MAPDEF_NOMASK),
+	MAPDEF("pcie0.0",     4, 0xe0, MAPDEF_PCIMASK),
+	MAPDEF("pcie1.0",     8, 0xe0, MAPDEF_PCIMASK),
+	{},
+};
+
+static const struct mvebu_mbus_soc_data armada_370_mbus_data = {
+	.num_wins            = 20,
+	.num_remappable_wins = 8,
+	.win_cfg_offset      = armada_370_xp_mbus_win_offset,
+	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
+	.show_cpu_target     = mvebu_sdram_debug_show_orion,
+	.map                 = armada_370_map,
+};
+
+static const struct mvebu_mbus_mapping armada_xp_map[] = {
+	MAPDEF("bootrom",     1, 0x1d, MAPDEF_NOMASK),
+	MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK),
+	MAPDEF("devbus-cs0",  1, 0x3e, MAPDEF_NOMASK),
+	MAPDEF("devbus-cs1",  1, 0x3d, MAPDEF_NOMASK),
+	MAPDEF("devbus-cs2",  1, 0x3b, MAPDEF_NOMASK),
+	MAPDEF("devbus-cs3",  1, 0x37, MAPDEF_NOMASK),
+	MAPDEF("pcie0.0",     4, 0xe0, MAPDEF_PCIMASK),
+	MAPDEF("pcie0.1",     4, 0xd0, MAPDEF_PCIMASK),
+	MAPDEF("pcie0.2",     4, 0xb0, MAPDEF_PCIMASK),
+	MAPDEF("pcie0.3",     4, 0x70, MAPDEF_PCIMASK),
+	MAPDEF("pcie1.0",     8, 0xe0, MAPDEF_PCIMASK),
+	MAPDEF("pcie1.1",     8, 0xd0, MAPDEF_PCIMASK),
+	MAPDEF("pcie1.2",     8, 0xb0, MAPDEF_PCIMASK),
+	MAPDEF("pcie1.3",     8, 0x70, MAPDEF_PCIMASK),
+	MAPDEF("pcie2.0",     4, 0xf0, MAPDEF_PCIMASK),
+	MAPDEF("pcie3.0",     8, 0xf0, MAPDEF_PCIMASK),
+	{},
+};
+
+static const struct mvebu_mbus_soc_data armada_xp_mbus_data = {
+	.num_wins            = 20,
+	.num_remappable_wins = 8,
+	.win_cfg_offset      = armada_370_xp_mbus_win_offset,
+	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
+	.show_cpu_target     = mvebu_sdram_debug_show_orion,
+	.map                 = armada_xp_map,
+};
+
+static const struct mvebu_mbus_mapping kirkwood_map[] = {
+	MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
+	MAPDEF("pcie1.0", 4, 0xd0, MAPDEF_PCIMASK),
+	MAPDEF("sram",    3, 0x01, MAPDEF_NOMASK),
+	MAPDEF("nand",    1, 0x2f, MAPDEF_NOMASK),
+	{},
+};
+
+static const struct mvebu_mbus_soc_data kirkwood_mbus_data = {
+	.num_wins            = 8,
+	.num_remappable_wins = 4,
+	.win_cfg_offset      = orion_mbus_win_offset,
+	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
+	.show_cpu_target     = mvebu_sdram_debug_show_orion,
+	.map                 = kirkwood_map,
+};
+
+static const struct mvebu_mbus_mapping dove_map[] = {
+	MAPDEF("pcie0.0",    0x4, 0xe0, MAPDEF_PCIMASK),
+	MAPDEF("pcie1.0",    0x8, 0xe0, MAPDEF_PCIMASK),
+	MAPDEF("cesa",       0x3, 0x01, MAPDEF_NOMASK),
+	MAPDEF("bootrom",    0x1, 0xfd, MAPDEF_NOMASK),
+	MAPDEF("scratchpad", 0xd, 0x0, MAPDEF_NOMASK),
+	{},
+};
+
+static const struct mvebu_mbus_soc_data dove_mbus_data = {
+	.num_wins            = 8,
+	.num_remappable_wins = 4,
+	.win_cfg_offset      = orion_mbus_win_offset,
+	.setup_cpu_target    = mvebu_mbus_dove_setup_cpu_target,
+	.show_cpu_target     = mvebu_sdram_debug_show_dove,
+	.map                 = dove_map,
+};
+
+static const struct mvebu_mbus_mapping orion5x_map[] = {
+	MAPDEF("pcie0.0",     4, 0x51, MAPDEF_ORIONPCIMASK),
+	MAPDEF("pci0.0",      3, 0x51, MAPDEF_ORIONPCIMASK),
+	MAPDEF("devbus-boot", 1, 0x0f, MAPDEF_NOMASK),
+	MAPDEF("devbus-cs0",  1, 0x1e, MAPDEF_NOMASK),
+	MAPDEF("devbus-cs1",  1, 0x1d, MAPDEF_NOMASK),
+	MAPDEF("devbus-cs2",  1, 0x1b, MAPDEF_NOMASK),
+	MAPDEF("sram",        0, 0x00, MAPDEF_NOMASK),
+	{},
+};
+
+/*
+ * Some variants of Orion5x have 4 remappable windows, some other have
+ * only two of them.
+ */
+static const struct mvebu_mbus_soc_data orion5x_4win_mbus_data = {
+	.num_wins            = 8,
+	.num_remappable_wins = 4,
+	.win_cfg_offset      = orion_mbus_win_offset,
+	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
+	.show_cpu_target     = mvebu_sdram_debug_show_orion,
+	.map                 = orion5x_map,
+};
+
+static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = {
+	.num_wins            = 8,
+	.num_remappable_wins = 2,
+	.win_cfg_offset      = orion_mbus_win_offset,
+	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
+	.show_cpu_target     = mvebu_sdram_debug_show_orion,
+	.map                 = orion5x_map,
+};
+
+static const struct mvebu_mbus_mapping mv78xx0_map[] = {
+	MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
+	MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK),
+	MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK),
+	MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK),
+	MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK),
+	MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK),
+	MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK),
+	MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK),
+	MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK),
+	MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK),
+	{},
+};
+
+static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = {
+	.num_wins            = 14,
+	.num_remappable_wins = 8,
+	.win_cfg_offset      = mv78xx0_mbus_win_offset,
+	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
+	.show_cpu_target     = mvebu_sdram_debug_show_orion,
+	.map                 = mv78xx0_map,
+};
+
+/*
+ * The driver doesn't yet have a DT binding because the details of
+ * this DT binding still need to be sorted out. However, as a
+ * preparation, we already use of_device_id to match a SoC description
+ * string against the SoC specific details of this driver.
+ */
+static const struct of_device_id of_mvebu_mbus_ids[] = {
+	{ .compatible = "marvell,armada370-mbus",
+	  .data = &armada_370_mbus_data, },
+	{ .compatible = "marvell,armadaxp-mbus",
+	  .data = &armada_xp_mbus_data, },
+	{ .compatible = "marvell,kirkwood-mbus",
+	  .data = &kirkwood_mbus_data, },
+	{ .compatible = "marvell,dove-mbus",
+	  .data = &dove_mbus_data, },
+	{ .compatible = "marvell,orion5x-88f5281-mbus",
+	  .data = &orion5x_4win_mbus_data, },
+	{ .compatible = "marvell,orion5x-88f5182-mbus",
+	  .data = &orion5x_2win_mbus_data, },
+	{ .compatible = "marvell,orion5x-88f5181-mbus",
+	  .data = &orion5x_2win_mbus_data, },
+	{ .compatible = "marvell,orion5x-88f6183-mbus",
+	  .data = &orion5x_4win_mbus_data, },
+	{ .compatible = "marvell,mv78xx0-mbus",
+	  .data = &mv78xx0_mbus_data, },
+	{ },
+};
+
+/*
+ * Public API of the driver
+ */
+int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base,
+				      size_t size, phys_addr_t remap,
+				      unsigned int flags)
+{
+	struct mvebu_mbus_state *s = &mbus_state;
+	u8 target, attr;
+	int i;
+
+	if (!s->soc->map)
+		return -ENODEV;
+
+	for (i = 0; s->soc->map[i].name; i++)
+		if (!strcmp(s->soc->map[i].name, devname))
+			break;
+
+	if (!s->soc->map[i].name) {
+		pr_err("mvebu-mbus: unknown device '%s'\n", devname);
+		return -ENODEV;
+	}
+
+	target = s->soc->map[i].target;
+	attr   = s->soc->map[i].attr;
+
+	if (flags == MVEBU_MBUS_PCI_MEM)
+		attr |= 0x8;
+	else if (flags == MVEBU_MBUS_PCI_WA)
+		attr |= 0x28;
+
+	if (!mvebu_mbus_window_conflicts(s, base, size, target, attr)) {
+		pr_err("mvebu-mbus: cannot add window '%s', conflicts with another window\n",
+		       devname);
+		return -EINVAL;
+	}
+
+	return mvebu_mbus_alloc_window(s, base, size, remap, target, attr);
+
+}
+
+int mvebu_mbus_add_window(const char *devname, phys_addr_t base, size_t size)
+{
+	return mvebu_mbus_add_window_remap_flags(devname, base, size,
+						 MVEBU_MBUS_NO_REMAP, 0);
+}
+
+int mvebu_mbus_del_window(phys_addr_t base, size_t size)
+{
+	int win;
+
+	win = mvebu_mbus_find_window(&mbus_state, base, size);
+	if (win < 0)
+		return win;
+
+	mvebu_mbus_disable_window(&mbus_state, win);
+	return 0;
+}
+
+static __init int mvebu_mbus_debugfs_init(void)
+{
+	struct mvebu_mbus_state *s = &mbus_state;
+
+	/*
+	 * If no base has been initialized, doesn't make sense to
+	 * register the debugfs entries. We may be on a multiplatform
+	 * kernel that isn't running a Marvell EBU SoC.
+	 */
+	if (!s->mbuswins_base)
+		return 0;
+
+	s->debugfs_root = debugfs_create_dir("mvebu-mbus", NULL);
+	if (s->debugfs_root) {
+		s->debugfs_sdram = debugfs_create_file("sdram", S_IRUGO,
+						       s->debugfs_root, NULL,
+						       &mvebu_sdram_debug_fops);
+		s->debugfs_devs = debugfs_create_file("devices", S_IRUGO,
+						      s->debugfs_root, NULL,
+						      &mvebu_devs_debug_fops);
+	}
+
+	return 0;
+}
+fs_initcall(mvebu_mbus_debugfs_init);
+
+int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base,
+			   size_t mbuswins_size,
+			   phys_addr_t sdramwins_phys_base,
+			   size_t sdramwins_size)
+{
+	struct mvebu_mbus_state *mbus = &mbus_state;
+	const struct of_device_id *of_id;
+	int win;
+
+	for (of_id = of_mvebu_mbus_ids; of_id->compatible; of_id++)
+		if (!strcmp(of_id->compatible, soc))
+			break;
+
+	if (!of_id->compatible) {
+		pr_err("mvebu-mbus: could not find a matching SoC family\n");
+		return -ENODEV;
+	}
+
+	mbus->soc = of_id->data;
+
+	mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size);
+	if (!mbus->mbuswins_base)
+		return -ENOMEM;
+
+	mbus->sdramwins_base = ioremap(sdramwins_phys_base, sdramwins_size);
+	if (!mbus->sdramwins_base) {
+		iounmap(mbus_state.mbuswins_base);
+		return -ENOMEM;
+	}
+
+	if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"))
+		mbus->hw_io_coherency = 1;
+
+	for (win = 0; win < mbus->soc->num_wins; win++)
+		mvebu_mbus_disable_window(mbus, win);
+
+	mbus->soc->setup_cpu_target(mbus);
+
+	return 0;
+}

include/linux/mbus.h

@@ -32,6 +32,20 @@ struct mbus_dram_target_info
 	} cs[4];
 };
 
+/* Flags for PCI/PCIe address decoding regions */
+#define MVEBU_MBUS_PCI_IO  0x1
+#define MVEBU_MBUS_PCI_MEM 0x2
+#define MVEBU_MBUS_PCI_WA  0x3
+
+/*
+ * Magic value that explicits that we don't need a remapping-capable
+ * address decoding window.
+ */
+#define MVEBU_MBUS_NO_REMAP (0xffffffff)
+
+/* Maximum size of a mbus window name */
+#define MVEBU_MBUS_MAX_WINNAME_SZ 32
+
 /*
  * The Marvell mbus is to be found only on SOCs from the Orion family
  * at the moment.  Provide a dummy stub for other architectures.
@@ -44,4 +58,15 @@ static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void)
 	return NULL;
 }
 #endif
-#endif
+
+int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base,
+				      size_t size, phys_addr_t remap,
+				      unsigned int flags);
+int mvebu_mbus_add_window(const char *devname, phys_addr_t base,
+			  size_t size);
+int mvebu_mbus_del_window(phys_addr_t base, size_t size);
+int mvebu_mbus_init(const char *soc, phys_addr_t mbus_phys_base,
+		    size_t mbus_size, phys_addr_t sdram_phys_base,
+		    size_t sdram_size);
+
+#endif /* __LINUX_MBUS_H */