Merge bk://kernel.bkbits.net/gregkh/linux/i2c-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Documentation/i2c/dev-interface

@@ -3,7 +3,7 @@ possible to access all devices on an adapter from userspace, through
 the /dev interface. You need to load module i2c-dev for this.
 
 Each registered i2c adapter gets a number, counting from 0. You can
-examine /proc/bus/i2c to see what number corresponds to which adapter.
+examine /sys/class/i2c-dev/ to see what number corresponds to which adapter.
 I2C device files are character device files with major device number 89
 and a minor device number corresponding to the number assigned as 
 explained above. They should be called "i2c-%d" (i2c-0, i2c-1, ..., 
@@ -19,7 +19,7 @@ Yes, I know, you should never include kernel header files, but until glibc
 knows about i2c, there is not much choice.
 
 Now, you have to decide which adapter you want to access. You should
-inspect /proc/bus/i2c to decide this. Adapter numbers are assigned
+inspect /sys/class/i2c-dev/ to decide this. Adapter numbers are assigned
 somewhat dynamically, so you can not even assume /dev/i2c-0 is the
 first adapter.
 

drivers/i2c/chips/rtc8564.c

@@ -66,8 +66,11 @@ static unsigned short normal_addr[] = { 0x51, I2C_CLIENT_END };
 
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_addr,
+	.normal_i2c_range	= ignore,
 	.probe			= ignore,
+	.probe_range		= ignore,
 	.ignore			= ignore,
+	.ignore_range		= ignore,
 	.force			= ignore,
 };
 

drivers/i2c/i2c-core.c

@@ -760,7 +760,7 @@ int i2c_probe(struct i2c_adapter *adapter,
 			if (addr == address_data->normal_i2c[i]) {
 				found = 1;
 				dev_dbg(&adapter->dev, "found normal i2c entry for adapter %d, "
-					"addr %02x", adap_id,addr);
+					"addr %02x\n", adap_id, addr);
 			}
 		}
 
@@ -1021,6 +1021,22 @@ s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value)
 	                      I2C_SMBUS_WORD_DATA,&data);
 }
 
+/* Returns the number of bytes transferred */
+s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command,
+			       u8 length, u8 *values)
+{
+	union i2c_smbus_data data;
+	int i;
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+	for (i = 1; i <= length; i++)
+		data.block[i] = values[i-1];
+	data.block[0] = length;
+	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
+			      I2C_SMBUS_WRITE,command,
+			      I2C_SMBUS_BLOCK_DATA,&data);
+}
+
 /* Returns the number of read bytes */
 s32 i2c_smbus_block_process_call(struct i2c_client *client, u8 command, u8 length, u8 *values)
 {
@@ -1279,6 +1295,7 @@ EXPORT_SYMBOL(i2c_smbus_read_byte_data);
 EXPORT_SYMBOL(i2c_smbus_write_byte_data);
 EXPORT_SYMBOL(i2c_smbus_read_word_data);
 EXPORT_SYMBOL(i2c_smbus_write_word_data);
+EXPORT_SYMBOL(i2c_smbus_write_block_data);
 EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
 
 EXPORT_SYMBOL(i2c_get_functionality);

drivers/i2c/i2c-dev.c

@@ -539,7 +539,7 @@ static int __init i2c_dev_init(void)
 out_unreg_chrdev:
 	unregister_chrdev(I2C_MAJOR, "i2c");
 out:
-	printk(KERN_ERR "%s: Driver Initialisation failed", __FILE__);
+	printk(KERN_ERR "%s: Driver Initialisation failed\n", __FILE__);
 	return res;
 }
 

drivers/i2c/i2c-sensor-detect.c

@@ -115,7 +115,7 @@ int i2c_detect(struct i2c_adapter *adapter,
 			for (i = 0; !found && (normal_i2c[i] != I2C_CLIENT_END); i += 1) {
 				if (addr == normal_i2c[i]) {
 					found = 1;
-					dev_dbg(&adapter->dev, "found normal i2c entry for adapter %d, addr %02x", adapter_id, addr);
+					dev_dbg(&adapter->dev, "found normal i2c entry for adapter %d, addr %02x\n", adapter_id, addr);
 				}
 			}
 		}

include/linux/i2c.h

@@ -88,20 +88,12 @@ extern s32 i2c_smbus_write_byte_data(struct i2c_client * client,
 extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command);
 extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
                                      u8 command, u16 value);
-extern s32 i2c_smbus_process_call(struct i2c_client * client,
-                                  u8 command, u16 value);
-/* Returns the number of read bytes */
-extern s32 i2c_smbus_read_block_data(struct i2c_client * client,
-                                     u8 command, u8 *values);
+/* Returns the number of bytes transferred */
 extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
 				      u8 command, u8 length,
 				      u8 *values);
 extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
 					 u8 command, u8 *values);
-extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
-                                          u8 command, u8 length,
-                                          u8 *values);
-
 
 /*
  * A driver is capable of handling one or more physical devices present on

sound/ppc/daca.c

@@ -56,10 +56,11 @@ static int daca_init_client(pmac_keywest_t *i2c)
 	unsigned short wdata = 0x00;
 	/* SR: no swap, 1bit delay, 32-48kHz */
 	/* GCFG: power amp inverted, DAC on */
-	if (snd_pmac_keywest_write_byte(i2c, DACA_REG_SR, 0x08) < 0 ||
-	    snd_pmac_keywest_write_byte(i2c, DACA_REG_GCFG, 0x05) < 0)
+	if (i2c_smbus_write_byte_data(i2c->client, DACA_REG_SR, 0x08) < 0 ||
+	    i2c_smbus_write_byte_data(i2c->client, DACA_REG_GCFG, 0x05) < 0)
 		return -EINVAL;
-	return snd_pmac_keywest_write(i2c, DACA_REG_AVOL, 2, (unsigned char*)&wdata);
+	return i2c_smbus_write_block_data(i2c->client, DACA_REG_AVOL,
+					  2, (unsigned char*)&wdata);
 }
 
 /*
@@ -81,7 +82,8 @@ static int daca_set_volume(pmac_daca_t *mix)
 	else
 		data[1] = mix->right_vol;
 	data[1] |= mix->deemphasis ? 0x40 : 0;
-	if (snd_pmac_keywest_write(&mix->i2c, DACA_REG_AVOL, 2, data) < 0) {
+	if (i2c_smbus_write_block_data(mix->i2c.client, DACA_REG_AVOL,
+				       2, data) < 0) {
 		snd_printk("failed to set volume \n");
 		return -EINVAL;
 	}
@@ -188,7 +190,7 @@ static int daca_put_amp(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol
 	change = mix->amp_on != ucontrol->value.integer.value[0];
 	if (change) {
 		mix->amp_on = ucontrol->value.integer.value[0];
-		snd_pmac_keywest_write_byte(&mix->i2c, DACA_REG_GCFG,
+		i2c_smbus_write_byte_data(mix->i2c.client, DACA_REG_GCFG,
 					  mix->amp_on ? 0x05 : 0x04);
 	}
 	return change;
@@ -220,8 +222,8 @@ static snd_kcontrol_new_t daca_mixers[] = {
 static void daca_resume(pmac_t *chip)
 {
 	pmac_daca_t *mix = chip->mixer_data;
-	snd_pmac_keywest_write_byte(&mix->i2c, DACA_REG_SR, 0x08);
-	snd_pmac_keywest_write_byte(&mix->i2c, DACA_REG_GCFG,
+	i2c_smbus_write_byte_data(mix->i2c.client, DACA_REG_SR, 0x08);
+	i2c_smbus_write_byte_data(mix->i2c.client, DACA_REG_GCFG,
 				  mix->amp_on ? 0x05 : 0x04);
 	daca_set_volume(mix);
 }

sound/ppc/pmac.h

@@ -199,8 +199,6 @@ typedef struct snd_pmac_keywest {
 
 int snd_pmac_keywest_init(pmac_keywest_t *i2c);
 void snd_pmac_keywest_cleanup(pmac_keywest_t *i2c);
-#define snd_pmac_keywest_write(i2c,cmd,len,data) i2c_smbus_write_block_data((i2c)->client, cmd, len, data)
-#define snd_pmac_keywest_write_byte(i2c,cmd,data) i2c_smbus_write_byte_data((i2c)->client, cmd, data)
 
 /* misc */
 int snd_pmac_boolean_stereo_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo);

sound/ppc/tumbler.c

@@ -109,7 +109,8 @@ static int send_init_client(pmac_keywest_t *i2c, unsigned int *regs)
 	while (*regs > 0) {
 		int err, count = 10;
 		do {
-			err =  snd_pmac_keywest_write_byte(i2c, regs[0], regs[1]);
+			err = i2c_smbus_write_byte_data(i2c->client,
+							regs[0], regs[1]);
 			if (err >= 0)
 				break;
 			mdelay(10);
@@ -220,7 +221,8 @@ static int tumbler_set_master_volume(pmac_tumbler_t *mix)
 	block[4] = (right_vol >> 8)  & 0xff;
 	block[5] = (right_vol >> 0)  & 0xff;
   
-	if (snd_pmac_keywest_write(&mix->i2c, TAS_REG_VOL, 6, block) < 0) {
+	if (i2c_smbus_write_block_data(mix->i2c.client, TAS_REG_VOL,
+				       6, block) < 0) {
 		snd_printk("failed to set volume \n");
 		return -EINVAL;
 	}
@@ -320,7 +322,8 @@ static int tumbler_set_drc(pmac_tumbler_t *mix)
 		val[1] = 0;
 	}
 
-	if (snd_pmac_keywest_write(&mix->i2c, TAS_REG_DRC, 2, val) < 0) {
+	if (i2c_smbus_write_block_data(mix->i2c.client, TAS_REG_DRC,
+				       2, val) < 0) {
 		snd_printk("failed to set DRC\n");
 		return -EINVAL;
 	}
@@ -355,7 +358,8 @@ static int snapper_set_drc(pmac_tumbler_t *mix)
 	val[4] = 0x60;
 	val[5] = 0xa0;
 
-	if (snd_pmac_keywest_write(&mix->i2c, TAS_REG_DRC, 6, val) < 0) {
+	if (i2c_smbus_write_block_data(mix->i2c.client, TAS_REG_DRC,
+				       6, val) < 0) {
 		snd_printk("failed to set DRC\n");
 		return -EINVAL;
 	}
@@ -459,7 +463,8 @@ static int tumbler_set_mono_volume(pmac_tumbler_t *mix, struct tumbler_mono_vol
 	vol = info->table[vol];
 	for (i = 0; i < info->bytes; i++)
 		block[i] = (vol >> ((info->bytes - i - 1) * 8)) & 0xff;
-	if (snd_pmac_keywest_write(&mix->i2c, info->reg, info->bytes, block) < 0) {
+	if (i2c_smbus_write_block_data(mix->i2c.client, info->reg,
+				       info->bytes, block) < 0) {
 		snd_printk("failed to set mono volume %d\n", info->index);
 		return -EINVAL;
 	}
@@ -588,7 +593,7 @@ static int snapper_set_mix_vol1(pmac_tumbler_t *mix, int idx, int ch, int reg)
 		for (j = 0; j < 3; j++)
 			block[i * 3 + j] = (vol >> ((2 - j) * 8)) & 0xff;
 	}
-	if (snd_pmac_keywest_write(&mix->i2c, reg, 9, block) < 0) {
+	if (i2c_smbus_write_block_data(mix->i2c.client, reg, 9, block) < 0) {
 		snd_printk("failed to set mono volume %d\n", reg);
 		return -EINVAL;
 	}
@@ -689,7 +694,7 @@ static int snapper_set_capture_source(pmac_tumbler_t *mix)
 {
 	if (! mix->i2c.client)
 		return -ENODEV;
-	return snd_pmac_keywest_write_byte(&mix->i2c, TAS_REG_ACS,
+	return i2c_smbus_write_byte_data(mix->i2c.client, TAS_REG_ACS,
 					 mix->capture_source ? 2 : 0);
 }