Commit dc4cac67 authored by Forest Crossman's avatar Forest Crossman Committed by Mauro Carvalho Chehab

media: cx23885: Add support for AVerMedia CE310B

The AVerMedia CE310B is a simple composite + S-Video + stereo audio
capture card, and uses only the CX23888 to perform all of these
functions.

I've tested both video inputs and the audio interface and confirmed that
they're all working. However, there are some issues:

* Sometimes when I switch inputs the video signal turns black and can't
  be recovered until the system is rebooted. I haven't been able to
  determine the cause of this behavior, nor have I found a solution to
  fix it or any workarounds other than rebooting.
* The card sometimes seems to have trouble syncing to the video signal,
  and some of the VBI data appears as noise at the top of the frame, but
  I assume that to be a result of my very noisy RF environment and the
  card's unshielded input traces rather than a configuration issue.
Signed-off-by: default avatarForest Crossman <cyrozap@gmail.com>
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+huawei@kernel.org>
parent 76669f2e
......@@ -801,6 +801,25 @@ struct cx23885_board cx23885_boards[] = {
.name = "Hauppauge WinTV-Starburst2",
.portb = CX23885_MPEG_DVB,
},
[CX23885_BOARD_AVERMEDIA_CE310B] = {
.name = "AVerMedia CE310B",
.porta = CX23885_ANALOG_VIDEO,
.force_bff = 1,
.input = {{
.type = CX23885_VMUX_COMPOSITE1,
.vmux = CX25840_VIN1_CH1 |
CX25840_NONE_CH2 |
CX25840_NONE0_CH3,
.amux = CX25840_AUDIO7,
}, {
.type = CX23885_VMUX_SVIDEO,
.vmux = CX25840_VIN8_CH1 |
CX25840_NONE_CH2 |
CX25840_VIN7_CH3 |
CX25840_SVIDEO_ON,
.amux = CX25840_AUDIO7,
} },
},
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
......@@ -1124,6 +1143,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x0070,
.subdevice = 0xf02a,
.card = CX23885_BOARD_HAUPPAUGE_STARBURST2,
}, {
.subvendor = 0x1461,
.subdevice = 0x3100,
.card = CX23885_BOARD_AVERMEDIA_CE310B,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
......@@ -2348,6 +2371,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_T982:
case CX23885_BOARD_VIEWCAST_260E:
case CX23885_BOARD_VIEWCAST_460E:
case CX23885_BOARD_AVERMEDIA_CE310B:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", 0x88 >> 1, NULL);
......
......@@ -257,7 +257,8 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
(dev->board == CX23885_BOARD_MYGICA_X8507) ||
(dev->board == CX23885_BOARD_AVERMEDIA_HC81R) ||
(dev->board == CX23885_BOARD_VIEWCAST_260E) ||
(dev->board == CX23885_BOARD_VIEWCAST_460E)) {
(dev->board == CX23885_BOARD_VIEWCAST_460E) ||
(dev->board == CX23885_BOARD_AVERMEDIA_CE310B)) {
/* Configure audio routing */
v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
INPUT(input)->amux, 0, 0);
......
......@@ -101,6 +101,7 @@
#define CX23885_BOARD_HAUPPAUGE_STARBURST2 59
#define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885 60
#define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885 61
#define CX23885_BOARD_AVERMEDIA_CE310B 62
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment