Commit dc57aef5 authored by Ricardo Neri's avatar Ricardo Neri Committed by Paul Walmsley

ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled

As per the OMAP4 documentation, audio over HDMI must be transmitted in
no-idle mode. This patch adds the HWMOD_SWSUP_SIDLE so that omap_hwmod uses
no-idle/force-idle settings instead of smart-idle mode.

This is required as the DSS interface clock is used as functional clock
for the HDMI wrapper audio FIFO. If no-idle mode is not used, audio could
be choppy, have bad quality or not be audible at all.
Signed-off-by: default avatarRicardo Neri <ricardo.neri@ti.com>
[b-cousson@ti.com: Update the subject and align the .flags
location with the script template]
Signed-off-by: default avatarBenoit Cousson <b-cousson@ti.com>
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
parent 65e25976
...@@ -853,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { ...@@ -853,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
.name = "dss_hdmi", .name = "dss_hdmi",
.class = &omap44xx_hdmi_hwmod_class, .class = &omap44xx_hdmi_hwmod_class,
.clkdm_name = "l3_dss_clkdm", .clkdm_name = "l3_dss_clkdm",
/*
* HDMI audio requires to use no-idle mode. Hence,
* set idle mode by software.
*/
.flags = HWMOD_SWSUP_SIDLE,
.mpu_irqs = omap44xx_dss_hdmi_irqs, .mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.main_clk = "dss_48mhz_clk", .main_clk = "dss_48mhz_clk",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment