pinctrl: intel: Fix 2 kOhm bias which is 833 Ohm
2 kOhm bias was never an option in Intel GPIO hardware, the available matrix is: 000 none 001 1 kOhm (if available) 010 5 kOhm 100 20 kOhm As easy to get the 3 resistors are gated separately and according to parallel circuits calculations we may get combinations of the above where the result is always strictly less than minimal resistance. Hence, additional values can be: 011 ~833.3 Ohm 101 ~952.4 Ohm 110 ~4 kOhm 111 ~800 Ohm That said, convert TERM definitions to be the bit masks to reflect the above. While at it, enable the same setting for pull down case. Fixes: 7981c001 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support") Cc: Jamie McClymont <jamie@kwiius.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Showing
Please register or sign in to comment