Commit dd477003 authored by Matt Carlson's avatar Matt Carlson Committed by David S. Miller

tg3: Add TG3_FLG3_USE_PHYLIB

This patch introduces the TG3_FLG3_USE_PHYLIB flag and applies it to
some select places.  This work makes later patches a little easier to
read.
Signed-off-by: default avatarMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarBenjamin Li <benli@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f51f3562
......@@ -1605,7 +1605,7 @@ static void tg3_power_down_phy(struct tg3 *tp)
tw32_f(GRC_MISC_CFG, val | GRC_MISC_CFG_EPHY_IDDQ);
udelay(40);
return;
} else {
} else if (!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)) {
tg3_writephy(tp, MII_TG3_EXT_CTRL,
MII_TG3_EXT_CTRL_FORCE_LED_OFF);
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
......@@ -1687,18 +1687,22 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
tw32(TG3PCI_MISC_HOST_CTRL,
misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT);
if (tp->link_config.phy_is_low_power == 0) {
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
tp->link_config.phy_is_low_power = 1;
tp->link_config.orig_speed = tp->link_config.speed;
tp->link_config.orig_duplex = tp->link_config.duplex;
tp->link_config.orig_autoneg = tp->link_config.autoneg;
}
} else {
if (tp->link_config.phy_is_low_power == 0) {
tp->link_config.phy_is_low_power = 1;
tp->link_config.orig_speed = tp->link_config.speed;
tp->link_config.orig_duplex = tp->link_config.duplex;
tp->link_config.orig_autoneg = tp->link_config.autoneg;
}
if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) {
tp->link_config.speed = SPEED_10;
tp->link_config.duplex = DUPLEX_HALF;
tp->link_config.autoneg = AUTONEG_ENABLE;
tg3_setup_phy(tp, 0);
if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) {
tp->link_config.speed = SPEED_10;
tp->link_config.duplex = DUPLEX_HALF;
tp->link_config.autoneg = AUTONEG_ENABLE;
tg3_setup_phy(tp, 0);
}
}
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
......@@ -1729,8 +1733,10 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
u32 mac_mode;
if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x5a);
udelay(40);
if (!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)) {
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x5a);
udelay(40);
}
if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)
mac_mode = MAC_MODE_PORT_MODE_GMII;
......@@ -3821,7 +3827,15 @@ static int tg3_poll_work(struct tg3 *tp, int work_done, int budget)
sblk->status = SD_STATUS_UPDATED |
(sblk->status & ~SD_STATUS_LINK_CHG);
spin_lock(&tp->lock);
tg3_setup_phy(tp, 0);
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
tw32_f(MAC_STATUS,
(MAC_STATUS_SYNC_CHANGED |
MAC_STATUS_CFG_CHANGED |
MAC_STATUS_MI_COMPLETION |
MAC_STATUS_LNKSTATE_CHANGED));
udelay(40);
} else
tg3_setup_phy(tp, 0);
spin_unlock(&tp->lock);
}
}
......@@ -6602,7 +6616,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tg3_abort_hw(tp, 1);
}
if (reset_phy)
if (reset_phy &&
!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB))
tg3_phy_reset(tp);
err = tg3_chip_reset(tp);
......@@ -7153,13 +7168,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tw32_f(MAC_RX_MODE, tp->rx_mode);
udelay(10);
if (tp->link_config.phy_is_low_power) {
tp->link_config.phy_is_low_power = 0;
tp->link_config.speed = tp->link_config.orig_speed;
tp->link_config.duplex = tp->link_config.orig_duplex;
tp->link_config.autoneg = tp->link_config.orig_autoneg;
}
tp->mi_mode &= ~MAC_MI_MODE_AUTO_POLL;
tw32_f(MAC_MI_MODE, tp->mi_mode);
udelay(80);
......@@ -7210,19 +7218,28 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
}
err = tg3_setup_phy(tp, 0);
if (err)
return err;
if (!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)) {
if (tp->link_config.phy_is_low_power) {
tp->link_config.phy_is_low_power = 0;
tp->link_config.speed = tp->link_config.orig_speed;
tp->link_config.duplex = tp->link_config.orig_duplex;
tp->link_config.autoneg = tp->link_config.orig_autoneg;
}
if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) {
u32 tmp;
err = tg3_setup_phy(tp, 0);
if (err)
return err;
/* Clear CRC stats. */
if (!tg3_readphy(tp, MII_TG3_TEST1, &tmp)) {
tg3_writephy(tp, MII_TG3_TEST1,
tmp | MII_TG3_TEST1_CRC_EN);
tg3_readphy(tp, 0x14, &tmp);
if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) {
u32 tmp;
/* Clear CRC stats. */
if (!tg3_readphy(tp, MII_TG3_TEST1, &tmp)) {
tg3_writephy(tp, MII_TG3_TEST1,
tmp | MII_TG3_TEST1_CRC_EN);
tg3_readphy(tp, 0x14, &tmp);
}
}
}
......@@ -9644,7 +9661,8 @@ static int tg3_test_loopback(struct tg3 *tp)
tw32(TG3_CPMU_MUTEX_GNT, CPMU_MUTEX_GNT_DRIVER);
}
if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)) {
if (tg3_run_loopback(tp, TG3_PHY_LOOPBACK))
err |= TG3_PHY_LOOPBACK_FAILED;
}
......
......@@ -2480,6 +2480,7 @@ struct tg3 {
#define TG3_FLG3_ENABLE_APE 0x00000002
#define TG3_FLG3_5761_5784_AX_FIXES 0x00000004
#define TG3_FLG3_5701_DMA_BUG 0x00000008
#define TG3_FLG3_USE_PHYLIB 0x00000010
struct timer_list timer;
u16 timer_counter;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment