Commit ddaf5a5b authored by Johannes Berg's avatar Johannes Berg

iwlwifi: enable communication with WoWLAN firmware

On resuming, the opmode may have to be able to talk
to the WoWLAN/D3 firmware in order to query it about
its status and wakeup reasons. To do that, the opmode
has to call the new d3_resume() transport API which
will set up the device for command communcation.
Reviewed-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent 22dc3c95
......@@ -206,7 +206,8 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv,
#ifdef CONFIG_PM_SLEEP
if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len &&
priv->trans->ops->wowlan_suspend &&
priv->trans->ops->d3_suspend &&
priv->trans->ops->d3_resume &&
device_can_wakeup(priv->trans->dev)) {
hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT |
WIPHY_WOWLAN_DISCONNECT |
......@@ -426,7 +427,7 @@ static int iwlagn_mac_suspend(struct ieee80211_hw *hw,
if (ret)
goto error;
iwl_trans_wowlan_suspend(priv->trans);
iwl_trans_d3_suspend(priv->trans);
goto out;
......
......@@ -225,6 +225,8 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl)
#define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008)
#define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG)
#define FW_RSCSR_CHNL0_RXDCB_RDPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x00c)
#define FH_RSCSR_CHNL0_RDPTR FW_RSCSR_CHNL0_RXDCB_RDPTR_REG
/**
* Rx Config/Status Registers (RCSR)
......@@ -257,6 +259,8 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl)
#define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND)
#define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0)
#define FH_MEM_RCSR_CHNL0_RBDCB_WPTR (FH_MEM_RCSR_CHNL0 + 0x8)
#define FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ (FH_MEM_RCSR_CHNL0 + 0x10)
#define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */
#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */
......
......@@ -307,6 +307,16 @@ static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r)
#define IWL_MAX_TID_COUNT 8
#define IWL_FRAME_LIMIT 64
/**
* enum iwl_wowlan_status - WoWLAN image/device status
* @IWL_D3_STATUS_ALIVE: firmware is still running after resume
* @IWL_D3_STATUS_RESET: device was reset while suspended
*/
enum iwl_d3_status {
IWL_D3_STATUS_ALIVE,
IWL_D3_STATUS_RESET,
};
/**
* struct iwl_trans_config - transport configuration
*
......@@ -363,9 +373,12 @@ struct iwl_trans;
* May sleep
* @stop_device:stops the whole device (embedded CPU put to reset)
* May sleep
* @wowlan_suspend: put the device into the correct mode for WoWLAN during
* @d3_suspend: put the device into the correct mode for WoWLAN during
* suspend. This is optional, if not implemented WoWLAN will not be
* supported. This callback may sleep.
* @d3_resume: resume the device after WoWLAN, enabling the opmode to
* talk to the WoWLAN image to get its status. This is optional, if not
* implemented WoWLAN will not be supported. This callback may sleep.
* @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted.
* If RFkill is asserted in the middle of a SYNC host command, it must
* return -ERFKILL straight away.
......@@ -409,7 +422,8 @@ struct iwl_trans_ops {
void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr);
void (*stop_device)(struct iwl_trans *trans);
void (*wowlan_suspend)(struct iwl_trans *trans);
void (*d3_suspend)(struct iwl_trans *trans);
int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status);
int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
......@@ -562,10 +576,17 @@ static inline void iwl_trans_stop_device(struct iwl_trans *trans)
trans->state = IWL_TRANS_NO_FW;
}
static inline void iwl_trans_wowlan_suspend(struct iwl_trans *trans)
static inline void iwl_trans_d3_suspend(struct iwl_trans *trans)
{
might_sleep();
trans->ops->d3_suspend(trans);
}
static inline int iwl_trans_d3_resume(struct iwl_trans *trans,
enum iwl_d3_status *status)
{
might_sleep();
trans->ops->wowlan_suspend(trans);
return trans->ops->d3_resume(trans, status);
}
static inline int iwl_trans_send_cmd(struct iwl_trans *trans,
......
......@@ -357,6 +357,8 @@ void iwl_pcie_hcmd_complete(struct iwl_trans *trans,
struct iwl_rx_cmd_buffer *rxb, int handler_status);
void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn,
struct sk_buff_head *skbs);
void iwl_trans_pcie_tx_reset(struct iwl_trans *trans);
/*****************************************************
* Error handling
******************************************************/
......
......@@ -455,6 +455,10 @@ static void iwl_pcie_rx_hw_init(struct iwl_trans *trans, struct iwl_rxq *rxq)
/* Stop Rx DMA */
iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
/* reset and flush pointers */
iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_RBDCB_WPTR, 0);
iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ, 0);
iwl_write_direct32(trans, FH_RSCSR_CHNL0_RDPTR, 0);
/* Reset driver's Rx queue write index */
iwl_write_direct32(trans, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
......@@ -491,7 +495,6 @@ int iwl_pcie_rx_init(struct iwl_trans *trans)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
struct iwl_rxq *rxq = &trans_pcie->rxq;
int i, err;
unsigned long flags;
......@@ -518,6 +521,7 @@ int iwl_pcie_rx_init(struct iwl_trans *trans)
rxq->read = rxq->write = 0;
rxq->write_actual = 0;
rxq->free_count = 0;
memset(rxq->rb_stts, 0, sizeof(*rxq->rb_stts));
spin_unlock_irqrestore(&rxq->lock, flags);
iwl_pcie_rx_replenish(trans);
......
......@@ -75,21 +75,16 @@
#include "iwl-agn-hw.h"
#include "internal.h"
static void iwl_pcie_set_pwr_vmain(struct iwl_trans *trans)
static void iwl_pcie_set_pwr(struct iwl_trans *trans, bool vaux)
{
/*
* (for documentation purposes)
* to set power to V_AUX, do:
if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG,
APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
~APMG_PS_CTRL_MSK_PWR_SRC);
*/
iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG,
APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
~APMG_PS_CTRL_MSK_PWR_SRC);
if (vaux && pci_pme_capable(to_pci_dev(trans->dev), PCI_D3cold))
iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG,
APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
~APMG_PS_CTRL_MSK_PWR_SRC);
else
iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG,
APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
~APMG_PS_CTRL_MSK_PWR_SRC);
}
/* PCI registers */
......@@ -259,7 +254,7 @@ static int iwl_pcie_nic_init(struct iwl_trans *trans)
spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
iwl_pcie_set_pwr_vmain(trans);
iwl_pcie_set_pwr(trans, false);
iwl_op_mode_nic_config(trans->op_mode);
......@@ -545,15 +540,76 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
clear_bit(STATUS_RFKILL, &trans_pcie->status);
}
static void iwl_trans_pcie_wowlan_suspend(struct iwl_trans *trans)
static void iwl_trans_pcie_d3_suspend(struct iwl_trans *trans)
{
/* let the ucode operate on its own */
iwl_write32(trans, CSR_UCODE_DRV_GP1_SET,
CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE);
iwl_disable_interrupts(trans);
iwl_pcie_disable_ict(trans);
iwl_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
iwl_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
/*
* reset TX queues -- some of their registers reset during S3
* so if we don't reset everything here the D3 image would try
* to execute some invalid memory upon resume
*/
iwl_trans_pcie_tx_reset(trans);
iwl_pcie_set_pwr(trans, true);
}
static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans,
enum iwl_d3_status *status)
{
u32 val;
int ret;
iwl_pcie_set_pwr(trans, false);
val = iwl_read32(trans, CSR_RESET);
if (val & CSR_RESET_REG_FLAG_NEVO_RESET) {
*status = IWL_D3_STATUS_RESET;
return 0;
}
/*
* Also enables interrupts - none will happen as the device doesn't
* know we're waking it up, only when the opmode actually tells it
* after this call.
*/
iwl_pcie_reset_ict(trans);
iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
25000);
if (ret) {
IWL_ERR(trans, "Failed to resume the device (mac ready)\n");
return ret;
}
iwl_trans_pcie_tx_reset(trans);
ret = iwl_pcie_rx_init(trans);
if (ret) {
IWL_ERR(trans, "Failed to resume the device (RX reset)\n");
return ret;
}
iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE);
*status = IWL_D3_STATUS_ALIVE;
return 0;
}
static int iwl_trans_pcie_start_hw(struct iwl_trans *trans)
......@@ -1279,7 +1335,8 @@ static const struct iwl_trans_ops trans_ops_pcie = {
.start_fw = iwl_trans_pcie_start_fw,
.stop_device = iwl_trans_pcie_stop_device,
.wowlan_suspend = iwl_trans_pcie_wowlan_suspend,
.d3_suspend = iwl_trans_pcie_d3_suspend,
.d3_resume = iwl_trans_pcie_d3_resume,
.send_cmd = iwl_trans_pcie_send_hcmd,
......
......@@ -692,6 +692,29 @@ void iwl_pcie_tx_start(struct iwl_trans *trans, u32 scd_base_addr)
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
}
void iwl_trans_pcie_tx_reset(struct iwl_trans *trans)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
int txq_id;
for (txq_id = 0; txq_id < trans->cfg->base_params->num_of_queues;
txq_id++) {
struct iwl_txq *txq = &trans_pcie->txq[txq_id];
iwl_write_direct32(trans, FH_MEM_CBBC_QUEUE(txq_id),
txq->q.dma_addr >> 8);
iwl_pcie_txq_unmap(trans, txq_id);
txq->q.read_ptr = 0;
txq->q.write_ptr = 0;
}
/* Tell NIC where to find the "keep warm" buffer */
iwl_write_direct32(trans, FH_KW_MEM_ADDR_REG,
trans_pcie->kw.dma >> 4);
iwl_pcie_tx_start(trans, trans_pcie->scd_base_addr);
}
/*
* iwl_pcie_tx_stop - Stop all Tx DMA channels
*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment