drm/i915: extract compute_dpll from ironlake_crtc_mode_set

Too many lines just to compute the value of a single variable, so
move this to its own function.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_display.c

@@ -4783,53 +4783,39 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
 	I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
 }
 
-static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
-				  struct drm_display_mode *mode,
-				  struct drm_display_mode *adjusted_mode,
-				  int x, int y,
-				  struct drm_framebuffer *fb)
+static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
+				      struct drm_display_mode *adjusted_mode,
+				      intel_clock_t *clock, u32 fp)
 {
+	struct drm_crtc *crtc = &intel_crtc->base;
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
-	int plane = intel_crtc->plane;
-	int num_connectors = 0;
-	intel_clock_t clock, reduced_clock;
-	u32 dpll, fp = 0, fp2 = 0;
-	bool ok, has_reduced_clock = false, is_sdvo = false;
-	bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
-	struct intel_encoder *encoder;
-	u32 temp;
-	int ret, factor;
-	bool dither;
-	bool is_cpu_edp = false, is_pch_edp = false;
+	struct intel_encoder *intel_encoder;
+	uint32_t dpll;
+	int factor, pixel_multiplier, num_connectors = 0;
+	bool is_lvds = false, is_sdvo = false, is_tv = false;
+	bool is_dp = false, is_cpu_edp = false;
 
-	for_each_encoder_on_crtc(dev, crtc, encoder) {
-		switch (encoder->type) {
+	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+		switch (intel_encoder->type) {
 		case INTEL_OUTPUT_LVDS:
 			is_lvds = true;
 			break;
 		case INTEL_OUTPUT_SDVO:
 		case INTEL_OUTPUT_HDMI:
 			is_sdvo = true;
-			if (encoder->needs_tv_clock)
+			if (intel_encoder->needs_tv_clock)
 				is_tv = true;
 			break;
 		case INTEL_OUTPUT_TVOUT:
 			is_tv = true;
 			break;
-		case INTEL_OUTPUT_ANALOG:
-			is_crt = true;
-			break;
 		case INTEL_OUTPUT_DISPLAYPORT:
 			is_dp = true;
 			break;
 		case INTEL_OUTPUT_EDP:
 			is_dp = true;
-			if (intel_encoder_is_pch_edp(&encoder->base))
-				is_pch_edp = true;
-			else
+			if (!intel_encoder_is_pch_edp(&intel_encoder->base))
 				is_cpu_edp = true;
 			break;
 		}
@@ -4837,26 +4823,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		num_connectors++;
 	}
 
-	ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
-				     &has_reduced_clock, &reduced_clock);
-	if (!ok) {
-		DRM_ERROR("Couldn't find PLL settings for mode!\n");
-		return -EINVAL;
-	}
-
-	/* Ensure that the cursor is valid for the new mode before changing... */
-	intel_crtc_update_cursor(crtc, true);
-
-	/* determine panel color depth */
-	dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp, mode);
-	if (is_lvds && dev_priv->lvds_dither)
-		dither = true;
-
-	fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
-	if (has_reduced_clock)
-		fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
-			reduced_clock.m2;
-
 	/* Enable autotuning of the PLL clock (if permissible) */
 	factor = 21;
 	if (is_lvds) {
@@ -4867,7 +4833,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	} else if (is_sdvo && is_tv)
 		factor = 20;
 
-	if (clock.m < factor * clock.n)
+	if (clock->m < factor * clock->n)
 		fp |= FP_CB_TUNE;
 
 	dpll = 0;
@@ -4877,7 +4843,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	else
 		dpll |= DPLLB_MODE_DAC_SERIAL;
 	if (is_sdvo) {
-		int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+		pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
 		if (pixel_multiplier > 1) {
 			dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 		}
@@ -4887,11 +4853,11 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		dpll |= DPLL_DVO_HIGH_SPEED;
 
 	/* compute bitmask from p1 value */
-	dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+	dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
 	/* also FPA1 */
-	dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+	dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
 
-	switch (clock.p2) {
+	switch (clock->p2) {
 	case 5:
 		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
 		break;
@@ -4917,6 +4883,85 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	else
 		dpll |= PLL_REF_INPUT_DREFCLK;
 
+	return dpll;
+}
+
+static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode,
+				  int x, int y,
+				  struct drm_framebuffer *fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	int num_connectors = 0;
+	intel_clock_t clock, reduced_clock;
+	u32 dpll, fp = 0, fp2 = 0;
+	bool ok, has_reduced_clock = false, is_sdvo = false;
+	bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+	struct intel_encoder *encoder;
+	u32 temp;
+	int ret;
+	bool dither;
+	bool is_cpu_edp = false, is_pch_edp = false;
+
+	for_each_encoder_on_crtc(dev, crtc, encoder) {
+		switch (encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_SDVO:
+		case INTEL_OUTPUT_HDMI:
+			is_sdvo = true;
+			if (encoder->needs_tv_clock)
+				is_tv = true;
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			is_tv = true;
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			is_crt = true;
+			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			is_dp = true;
+			break;
+		case INTEL_OUTPUT_EDP:
+			is_dp = true;
+			if (intel_encoder_is_pch_edp(&encoder->base))
+				is_pch_edp = true;
+			else
+				is_cpu_edp = true;
+			break;
+		}
+
+		num_connectors++;
+	}
+
+	ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
+				     &has_reduced_clock, &reduced_clock);
+	if (!ok) {
+		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	/* Ensure that the cursor is valid for the new mode before changing... */
+	intel_crtc_update_cursor(crtc, true);
+
+	/* determine panel color depth */
+	dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp, mode);
+	if (is_lvds && dev_priv->lvds_dither)
+		dither = true;
+
+	fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+	if (has_reduced_clock)
+		fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
+			reduced_clock.m2;
+
+	dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp);
+
 	DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
 	drm_mode_debug_printmodeline(mode);