Merge branch 'net-phy-broadcom-RGMII-delays-fixes'

Florian Fainelli says:

====================
net: phy: broadcom: RGMII delays fixes

This patch series fixes the BCM54210E RGMII delay configuration which
could only have worked in a PHY_INTERFACE_MODE_RGMII configuration.
There is a forward declaration added such that the first patch can be
picked up for -stable and apply fine all the way back to when the bug
was introduced.

The second patch eliminates duplicated code that used a different kind
of logic and did not use existing constants defined.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/broadcom.c

@@ -26,18 +26,13 @@ MODULE_DESCRIPTION("Broadcom PHY driver");
 MODULE_AUTHOR("Maciej W. Rozycki");
 MODULE_LICENSE("GPL");
 
+static int bcm54xx_config_clock_delay(struct phy_device *phydev);
+
 static int bcm54210e_config_init(struct phy_device *phydev)
 {
 	int val;
 
-	val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
-	val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
-	val |= MII_BCM54XX_AUXCTL_MISC_WREN;
-	bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, val);
-
-	val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
-	val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
-	bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
+	bcm54xx_config_clock_delay(phydev);
 
 	if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
 		val = phy_read(phydev, MII_CTRL1000);
@@ -52,26 +47,7 @@ static int bcm54612e_config_init(struct phy_device *phydev)
 {
 	int reg;
 
-	/* Clear TX internal delay unless requested. */
-	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
-	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) {
-		/* Disable TXD to GTXCLK clock delay (default set) */
-		/* Bit 9 is the only field in shadow register 00011 */
-		bcm_phy_write_shadow(phydev, 0x03, 0);
-	}
-
-	/* Clear RX internal delay unless requested. */
-	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
-	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
-		reg = bcm54xx_auxctl_read(phydev,
-					  MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
-		/* Disable RXD to RXC delay (default set) */
-		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
-		/* Clear shadow selector field */
-		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
-		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
-				     MII_BCM54XX_AUXCTL_MISC_WREN | reg);
-	}
+	bcm54xx_config_clock_delay(phydev);
 
 	/* Enable CLK125 MUX on LED4 if ref clock is enabled. */
 	if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {