Commit de716e32 authored by Viresh Kumar's avatar Viresh Kumar Committed by Len Brown

thermal/spear_thermal: replace readl/writel with lighter _relaxed variants

readl/writel versions for ARM contain memory barrier instruction for
synchronizing DMA buffers.  These are not required at least on this
module.  So use lighter _relaxed variants.
Signed-off-by: default avatarViresh Kumar <viresh.kumar@st.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLen Brown <len.brown@intel.com>
parent 6a92c366
...@@ -46,7 +46,7 @@ static inline int thermal_get_temp(struct thermal_zone_device *thermal, ...@@ -46,7 +46,7 @@ static inline int thermal_get_temp(struct thermal_zone_device *thermal,
* Data are ready to be read after 628 usec from POWERDOWN signal * Data are ready to be read after 628 usec from POWERDOWN signal
* (PDN) = 1 * (PDN) = 1
*/ */
*temp = (readl(stdev->thermal_base) & 0x7F) * MD_FACTOR; *temp = (readl_relaxed(stdev->thermal_base) & 0x7F) * MD_FACTOR;
return 0; return 0;
} }
...@@ -63,8 +63,8 @@ static int spear_thermal_suspend(struct device *dev) ...@@ -63,8 +63,8 @@ static int spear_thermal_suspend(struct device *dev)
unsigned int actual_mask = 0; unsigned int actual_mask = 0;
/* Disable SPEAr Thermal Sensor */ /* Disable SPEAr Thermal Sensor */
actual_mask = readl(stdev->thermal_base); actual_mask = readl_relaxed(stdev->thermal_base);
writel(actual_mask & ~stdev->flags, stdev->thermal_base); writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base);
clk_disable(stdev->clk); clk_disable(stdev->clk);
dev_info(dev, "Suspended.\n"); dev_info(dev, "Suspended.\n");
...@@ -87,8 +87,8 @@ static int spear_thermal_resume(struct device *dev) ...@@ -87,8 +87,8 @@ static int spear_thermal_resume(struct device *dev)
} }
/* Enable SPEAr Thermal Sensor */ /* Enable SPEAr Thermal Sensor */
actual_mask = readl(stdev->thermal_base); actual_mask = readl_relaxed(stdev->thermal_base);
writel(actual_mask | stdev->flags, stdev->thermal_base); writel_relaxed(actual_mask | stdev->flags, stdev->thermal_base);
dev_info(dev, "Resumed.\n"); dev_info(dev, "Resumed.\n");
...@@ -145,7 +145,7 @@ static int spear_thermal_probe(struct platform_device *pdev) ...@@ -145,7 +145,7 @@ static int spear_thermal_probe(struct platform_device *pdev)
} }
stdev->flags = pdata->thermal_flags; stdev->flags = pdata->thermal_flags;
writel(stdev->flags, stdev->thermal_base); writel_relaxed(stdev->flags, stdev->thermal_base);
spear_thermal = thermal_zone_device_register("spear_thermal", 0, spear_thermal = thermal_zone_device_register("spear_thermal", 0,
stdev, &ops, 0, 0, 0, 0); stdev, &ops, 0, 0, 0, 0);
...@@ -180,8 +180,8 @@ static int spear_thermal_exit(struct platform_device *pdev) ...@@ -180,8 +180,8 @@ static int spear_thermal_exit(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL); platform_set_drvdata(pdev, NULL);
/* Disable SPEAr Thermal Sensor */ /* Disable SPEAr Thermal Sensor */
actual_mask = readl(stdev->thermal_base); actual_mask = readl_relaxed(stdev->thermal_base);
writel(actual_mask & ~stdev->flags, stdev->thermal_base); writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base);
clk_disable(stdev->clk); clk_disable(stdev->clk);
clk_put(stdev->clk); clk_put(stdev->clk);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment