[PATCH] PNX8550 UART driver

Add UART support for PNX8330/8550/8950 Philips MIPS-based SoCs.
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/serial/Kconfig

@@ -686,6 +686,22 @@ config SERIAL_SH_SCI_CONSOLE
 	depends on SERIAL_SH_SCI=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_PNX8XXX
+	bool "Enable PNX8XXX SoCs' UART Support"
+	depends on MIPS && SOC_PNX8550
+	select SERIAL_CORE
+	help
+	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
+	  and you want to use serial ports, say Y.  Otherwise, say N.
+
+config SERIAL_PNX8XXX_CONSOLE
+	bool "Enable PNX8XX0 serial console"
+	depends on SERIAL_PNX8XXX
+	select SERIAL_CORE_CONSOLE
+	help
+	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
+	  and you want to use serial console, say Y. Otherwise, say N.
+
 config SERIAL_CORE
 	tristate
 

drivers/serial/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
 obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
 obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
 obj-$(CONFIG_SERIAL_PXA) += pxa.o
+obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
 obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
 obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
 obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o