Merge remote-tracking branch 'spi/for-6.3' into spi-next

Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Allwinner A10 SPI Controller
 
 allOf:
-  - $ref: "spi-controller.yaml"
+  - $ref: spi-controller.yaml
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>

Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Allwinner A31 SPI Controller
 
 allOf:
-  - $ref: "spi-controller.yaml"
+  - $ref: spi-controller.yaml
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>

Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml

@@ -2,8 +2,8 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/spi/amlogic,meson-gx-spicc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/amlogic,meson-gx-spicc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson SPI Communication Controller
 
@@ -41,7 +41,7 @@ properties:
     maxItems: 2
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
   - if:
       properties:
         compatible:
@@ -100,17 +100,17 @@ unevaluatedProperties: false
 examples:
   - |
     spi@c1108d80 {
-          compatible = "amlogic,meson-gx-spicc";
-          reg = <0xc1108d80 0x80>;
-          interrupts = <112>;
-          clocks = <&clk81>;
-          clock-names = "core";
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          display@0 {
-              compatible = "lg,lg4573";
-              spi-max-frequency = <1000000>;
-              reg = <0>;
-          };
+        compatible = "amlogic,meson-gx-spicc";
+        reg = <0xc1108d80 0x80>;
+        interrupts = <112>;
+        clocks = <&clk81>;
+        clock-names = "core";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "lg,lg4573";
+            spi-max-frequency = <1000000>;
+            reg = <0>;
+        };
     };

Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml

@@ -2,8 +2,8 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/spi/amlogic,meson6-spifc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/amlogic,meson6-spifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson SPI Flash Controller
 
@@ -11,7 +11,7 @@ maintainers:
   - Neil Armstrong <neil.armstrong@linaro.org>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 description: |
   The Meson SPIFC is a controller optimized for communication with SPI
@@ -40,15 +40,15 @@ unevaluatedProperties: false
 examples:
   - |
     spi@c1108c80 {
-          compatible = "amlogic,meson6-spifc";
-          reg = <0xc1108c80 0x80>;
-          clocks = <&clk81>;
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          flash: flash@0 {
-              compatible = "spansion,m25p80", "jedec,spi-nor";
-              reg = <0>;
-              spi-max-frequency = <40000000>;
-          };
+        compatible = "amlogic,meson6-spifc";
+        reg = <0xc1108c80 0x80>;
+        clocks = <&clk81>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash: flash@0 {
+            compatible = "spansion,m25p80", "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+        };
     };

Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml

@@ -15,7 +15,7 @@ description: |
   SPI) of the AST2400, AST2500 and AST2600 SOCs.
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
@@ -60,23 +60,23 @@ examples:
         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 
         flash@0 {
-                reg = < 0 >;
-                compatible = "jedec,spi-nor";
-                spi-max-frequency = <50000000>;
-                spi-rx-bus-width = <2>;
+            reg = < 0 >;
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            spi-rx-bus-width = <2>;
         };
 
         flash@1 {
-                reg = < 1 >;
-                compatible = "jedec,spi-nor";
-                spi-max-frequency = <50000000>;
-                spi-rx-bus-width = <2>;
+            reg = < 1 >;
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            spi-rx-bus-width = <2>;
         };
 
         flash@2 {
-                reg = < 2 >;
-                compatible = "jedec,spi-nor";
-                spi-max-frequency = <50000000>;
-                spi-rx-bus-width = <2>;
+            reg = < 2 >;
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            spi-rx-bus-width = <2>;
         };
     };

Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml

+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/brcm,bcm63xx-hsspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Broadband SoC High Speed SPI controller
+
+maintainers:
+  - William Zhang <william.zhang@broadcom.com>
+  - Kursad Oney <kursad.oney@broadcom.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |
+  Broadcom Broadband SoC supports High Speed SPI master controller since the
+  early MIPS based chips such as BCM6328 and BCM63268.  This initial rev 1.0
+  controller was carried over to recent ARM based chips, such as BCM63138,
+  BCM4908 and BCM6858. The old MIPS based chip should continue to use the
+  brcm,bcm6328-hsspi compatible string. The recent ARM based chip is required to
+  use the brcm,bcmbca-hsspi-v1.0 as part of its compatible string list as
+  defined below to match the specific chip along with ip revision info.
+
+  This rev 1.0 controller has a limitation that can not keep the chip select line
+  active between the SPI transfers within the same SPI message. This can
+  terminate the transaction to some SPI devices prematurely. The issue can be
+  worked around by either the controller's prepend mode or using the dummy chip
+  select workaround. Driver automatically picks the suitable mode based on
+  transfer type so it is transparent to the user.
+
+  The newer SoCs such as BCM6756, BCM4912 and BCM6855 include an updated SPI
+  controller rev 1.1 that add the capability to allow the driver to control chip
+  select explicitly. This solves the issue in the old controller.
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,bcm6328-hsspi
+      - items:
+          - enum:
+              - brcm,bcm47622-hsspi
+              - brcm,bcm4908-hsspi
+              - brcm,bcm63138-hsspi
+              - brcm,bcm63146-hsspi
+              - brcm,bcm63148-hsspi
+              - brcm,bcm63158-hsspi
+              - brcm,bcm63178-hsspi
+              - brcm,bcm6846-hsspi
+              - brcm,bcm6856-hsspi
+              - brcm,bcm6858-hsspi
+              - brcm,bcm6878-hsspi
+          - const: brcm,bcmbca-hsspi-v1.0
+      - items:
+          - enum:
+              - brcm,bcm4912-hsspi
+              - brcm,bcm6756-hsspi
+              - brcm,bcm6813-hsspi
+              - brcm,bcm6855-hsspi
+          - const: brcm,bcmbca-hsspi-v1.1
+
+  reg:
+    items:
+      - description: main registers
+      - description: miscellaneous control registers
+    minItems: 1
+
+  reg-names:
+    items:
+      - const: hsspi
+      - const: spim-ctrl
+    minItems: 1
+
+  clocks:
+    items:
+      - description: SPI master reference clock
+      - description: SPI master pll clock
+
+  clock-names:
+    items:
+      - const: hsspi
+      - const: pll
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm6328-hsspi
+              - brcm,bcmbca-hsspi-v1.0
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          minItems: 2
+          maxItems: 2
+      required:
+        - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    spi@ff801000 {
+        compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+        reg = <0xff801000 0x1000>,
+              <0xff802610 0x4>;
+        reg-names = "hsspi", "spim-ctrl";
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&hsspi>, <&hsspi_pll>;
+        clock-names = "hsspi", "pll";
+        num-cs = <8>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };

Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml

@@ -99,98 +99,98 @@ required:
 examples:
   - | # BRCMSTB SoC: SPI Master (MSPI+BSPI) for SPI-NOR access
     spi@f03e3400 {
-            compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
-            reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>;
-            reg-names = "mspi", "bspi", "cs_reg";
-            interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>;
-            interrupt-parent = <&gic>;
-            interrupt-names = "mspi_done",
-                              "mspi_halted",
-                              "spi_lr_fullness_reached",
-                              "spi_lr_session_aborted",
-                              "spi_lr_impatient",
-                              "spi_lr_session_done",
-                              "spi_lr_overread";
-            clocks = <&hif_spi>;
-            #address-cells = <0x1>;
-            #size-cells = <0x0>;
-
-            flash@0 {
-                    #size-cells = <0x2>;
-                    #address-cells = <0x2>;
-                    compatible = "m25p80";
-                    reg = <0x0>;
-                    spi-max-frequency = <0x2625a00>;
-                    spi-cpol;
-                    spi-cpha;
-            };
+        compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
+        reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>;
+        reg-names = "mspi", "bspi", "cs_reg";
+        interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>;
+        interrupt-parent = <&gic>;
+        interrupt-names = "mspi_done",
+                          "mspi_halted",
+                          "spi_lr_fullness_reached",
+                          "spi_lr_session_aborted",
+                          "spi_lr_impatient",
+                          "spi_lr_session_done",
+                          "spi_lr_overread";
+        clocks = <&hif_spi>;
+        #address-cells = <0x1>;
+        #size-cells = <0x0>;
+
+        flash@0 {
+            #size-cells = <0x2>;
+            #address-cells = <0x2>;
+            compatible = "m25p80";
+            reg = <0x0>;
+            spi-max-frequency = <0x2625a00>;
+            spi-cpol;
+            spi-cpha;
+        };
     };
   - | # BRCMSTB SoC: MSPI master for any SPI device
     spi@f0416000 {
-            clocks = <&upg_fixed>;
-            compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
-            reg = <0xf0416000 0x180>;
-            reg-names = "mspi";
-            interrupts = <0x14>;
-            interrupt-parent = <&irq0_aon_intc>;
-            interrupt-names = "mspi_done";
-            #address-cells = <1>;
-            #size-cells = <0>;
+        clocks = <&upg_fixed>;
+        compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
+        reg = <0xf0416000 0x180>;
+        reg-names = "mspi";
+        interrupts = <0x14>;
+        interrupt-parent = <&irq0_aon_intc>;
+        interrupt-names = "mspi_done";
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
   - | # iProc SoC
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     spi@18027200 {
-            compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
-            reg = <0x18027200 0x184>,
-                  <0x18027000 0x124>,
-                  <0x1811c408 0x004>,
-                  <0x180273a0 0x01c>;
-            reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-            interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "mspi_done",
-                              "mspi_halted",
-                              "spi_lr_fullness_reached",
-                              "spi_lr_session_aborted",
-                              "spi_lr_impatient",
-                              "spi_lr_session_done";
-            clocks = <&iprocmed>;
-            num-cs = <2>;
-            #address-cells = <1>;
-            #size-cells = <0>;
+        compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+        reg = <0x18027200 0x184>,
+              <0x18027000 0x124>,
+              <0x1811c408 0x004>,
+              <0x180273a0 0x01c>;
+        reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "mspi_done",
+                          "mspi_halted",
+                          "spi_lr_fullness_reached",
+                          "spi_lr_session_aborted",
+                          "spi_lr_impatient",
+                          "spi_lr_session_done";
+        clocks = <&iprocmed>;
+        num-cs = <2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
   - | # NS2 SoC
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     spi@66470200 {
-            compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
-            reg = <0x66470200 0x184>,
-                  <0x66470000 0x124>,
-                  <0x67017408 0x004>,
-                  <0x664703a0 0x01c>;
-            reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-            interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "spi_l1_intr";
-            clocks = <&iprocmed>;
-            num-cs = <2>;
+        compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
+        reg = <0x66470200 0x184>,
+              <0x66470000 0x124>,
+              <0x67017408 0x004>,
+              <0x664703a0 0x01c>;
+        reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+        interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "spi_l1_intr";
+        clocks = <&iprocmed>;
+        num-cs = <2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
             #address-cells = <1>;
-            #size-cells = <0>;
-
-            flash@0 {
-                    #address-cells = <1>;
-                    #size-cells = <1>;
-                    compatible = "m25p80";
-                    reg = <0x0>;
-                    spi-max-frequency = <12500000>;
-                    spi-cpol;
-                    spi-cpha;
-            };
+            #size-cells = <1>;
+            compatible = "m25p80";
+            reg = <0x0>;
+            spi-max-frequency = <12500000>;
+            spi-cpol;
+            spi-cpha;
+        };
     };

Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml

@@ -47,7 +47,7 @@ properties:
   cdns,fifo-depth:
     description:
       Size of the data FIFO in words.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [ 128, 256 ]
     default: 128
 
@@ -103,21 +103,21 @@ unevaluatedProperties: false
 examples:
   - |
     qspi: spi@ff705000 {
-      compatible = "cdns,qspi-nor";
-      #address-cells = <1>;
-      #size-cells = <0>;
-      reg = <0xff705000 0x1000>,
-            <0xffa00000 0x1000>;
-      interrupts = <0 151 4>;
-      clocks = <&qspi_clk>;
-      cdns,fifo-depth = <128>;
-      cdns,fifo-width = <4>;
-      cdns,trigger-address = <0x00000000>;
-      resets = <&rst 0x1>, <&rst 0x2>;
-      reset-names = "qspi", "qspi-ocp";
-
-      flash@0 {
-              compatible = "jedec,spi-nor";
-              reg = <0x0>;
-      };
+        compatible = "cdns,qspi-nor";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xff705000 0x1000>,
+              <0xffa00000 0x1000>;
+        interrupts = <0 151 4>;
+        clocks = <&qspi_clk>;
+        cdns,fifo-depth = <128>;
+        cdns,fifo-width = <4>;
+        cdns,trigger-address = <0x00000000>;
+        resets = <&rst 0x1>, <&rst 0x2>;
+        reset-names = "qspi", "qspi-ocp";
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0x0>;
+        };
     };

Documentation/devicetree/bindings/spi/cdns,xspi.yaml

@@ -2,8 +2,8 @@
 # Copyright 2020-21 Cadence
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/spi/cdns,xspi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/cdns,xspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Cadence XSPI Controller
 
@@ -16,7 +16,7 @@ description: |
   read/write access to slaves such as SPI-NOR flash.
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Han Xu <han.xu@nxp.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Shawn Guo <shawnguo@kernel.org>
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Leilk Liu <leilk.liu@mediatek.com>
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml

@@ -18,14 +18,12 @@ description: |
   using the accompanying ECC engine. There should be only one spi
   slave device following generic spi bindings.
 
-allOf:
-  - $ref: /schemas/spi/spi-controller.yaml#
-
 properties:
   compatible:
     enum:
       - mediatek,mt7622-snand
       - mediatek,mt7629-snand
+      - mediatek,mt7986-snand
 
   reg:
     items:
@@ -36,19 +34,20 @@ properties:
       - description: NFI interrupt
 
   clocks:
-    items:
-      - description: clock used for the controller
-      - description: clock used for the SPI bus
+    minItems: 2
+    maxItems: 3
 
   clock-names:
-    items:
-      - const: nfi_clk
-      - const: pad_clk
+    minItems: 2
+    maxItems: 3
 
   nand-ecc-engine:
     description: device-tree node of the accompanying ECC engine.
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  mediatek,rx-latch-latency-ns:
+    description: Data read latch latency, unit is nanoseconds.
+
 required:
   - compatible
   - reg
@@ -57,6 +56,43 @@ required:
   - clock-names
   - nand-ecc-engine
 
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt7622-snand
+            - mediatek,mt7629-snand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock used for the controller
+            - description: clock used for the SPI bus
+        clock-names:
+          items:
+            - const: nfi_clk
+            - const: pad_clk
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt7986-snand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock used for the controller
+            - description: clock used for the SPI bus
+            - description: clock used for the AHB bus
+        clock-names:
+          items:
+            - const: nfi_clk
+            - const: pad_clk
+            - const: nfi_hclk
+
 unevaluatedProperties: false
 
 examples:

Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Leilk Liu <leilk.liu@mediatek.com>
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml

@@ -11,7 +11,7 @@ maintainers:
   - Bert Vermeulen <bert@biot.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Miquel Raynal <miquel.raynal@bootlin.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/mxs-spi.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Marek Vasut <marex@denx.de>
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml

@@ -11,7 +11,7 @@ maintainers:
   - Jonathan Hunter <jonathanh@nvidia.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
@@ -74,25 +74,25 @@ examples:
     #include <dt-bindings/reset/tegra210-car.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     spi@70410000 {
-            compatible = "nvidia,tegra210-qspi";
-            reg = <0x70410000 0x1000>;
-            interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-            #address-cells = <1>;
-            #size-cells = <0>;
-            clocks = <&tegra_car TEGRA210_CLK_QSPI>,
-                     <&tegra_car TEGRA210_CLK_QSPI_PM>;
-            clock-names = "qspi", "qspi_out";
-            resets = <&tegra_car 211>;
-            dmas = <&apbdma 5>, <&apbdma 5>;
-            dma-names = "rx", "tx";
-
-            flash@0 {
-                    compatible = "jedec,spi-nor";
-                    reg = <0>;
-                    spi-max-frequency = <104000000>;
-                    spi-tx-bus-width = <2>;
-                    spi-rx-bus-width = <2>;
-                    nvidia,tx-clk-tap-delay = <0>;
-                    nvidia,rx-clk-tap-delay = <0>;
-            };
+        compatible = "nvidia,tegra210-qspi";
+        reg = <0x70410000 0x1000>;
+        interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&tegra_car TEGRA210_CLK_QSPI>,
+                 <&tegra_car TEGRA210_CLK_QSPI_PM>;
+        clock-names = "qspi", "qspi_out";
+        resets = <&tegra_car 211>;
+        dmas = <&apbdma 5>, <&apbdma 5>;
+        dma-names = "rx", "tx";
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <104000000>;
+            spi-tx-bus-width = <2>;
+            spi-rx-bus-width = <2>;
+            nvidia,tx-clk-tap-delay = <0>;
+            nvidia,rx-clk-tap-delay = <0>;
+        };
     };

Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml

 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Quad Serial Peripheral Interface (QSPI)
 
@@ -53,6 +52,11 @@ properties:
       - const: qspi-config
       - const: qspi-memory
 
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -88,7 +92,6 @@ examples:
                 spi-tx-bus-width = <2>;
                 spi-rx-bus-width = <2>;
             };
-
         };
     };
 ...

Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml

@@ -11,7 +11,7 @@ maintainers:
   - Birger Koblitz <mail@birger-koblitz.de>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/renesas,rspi.yaml

@@ -141,15 +141,15 @@ examples:
     #include <dt-bindings/power/r8a7791-sysc.h>
 
     qspi: spi@e6b10000 {
-            compatible = "renesas,qspi-r8a7791", "renesas,qspi";
-            reg = <0xe6b10000 0x2c>;
-            interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 917>;
-            dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-            resets = <&cpg 917>;
-            num-cs = <1>;
-            #address-cells = <1>;
-            #size-cells = <0>;
+        compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+        reg = <0xe6b10000 0x2c>;
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 917>;
+        dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 917>;
+        num-cs = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };

Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Mark Brown <broonie@kernel.org>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt

-Binding for Broadcom BCM6328 High Speed SPI controller
-
-Required properties:
-- compatible: must contain of "brcm,bcm6328-hsspi".
-- reg: Base address and size of the controllers memory area.
-- interrupts: Interrupt for the SPI block.
-- clocks: phandles of the SPI clock and the PLL clock.
-- clock-names: must be "hsspi", "pll".
-- #address-cells: <1>, as required by generic SPI binding.
-- #size-cells: <0>, also as required by generic SPI binding.
-
-Optional properties:
-- num-cs: some controllers have less than 8 cs signals. Defaults to 8
-  if absent.
-
-Child nodes as per the generic SPI binding.
-
-Example:
-
-	spi@10001000 {
-		compatible = "brcm,bcm6328-hsspi";
-		reg = <0x10001000 0x600>;
-
-		interrupts = <29>;
-
-		clocks = <&clkctl 9>, <&hsspi_pll>;
-		clock-names = "hsspi", "pll";
-
-		num-cs = <2>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};

Documentation/devicetree/bindings/spi/spi-cadence.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/spi-gpio.yaml

@@ -14,7 +14,7 @@ description:
   dedicated GPIO lines.
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:
@@ -41,7 +41,7 @@ properties:
   num-chipselects:
     description: Number of chipselect lines. Should be <0> if a single device
       with no chip select is connected.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   # Deprecated properties
   gpio-sck: false

Documentation/devicetree/bindings/spi/spi-mux.yaml

@@ -30,8 +30,8 @@ description: |
       +------------+
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
-  - $ref: "/schemas/spi/spi-peripheral-props.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 maintainers:
   - Chris Packham <chris.packham@alliedtelesis.co.nz>

Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml

@@ -11,7 +11,7 @@ maintainers:
   - Kuldeep Singh <singh.kuldeep87k@gmail.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml

@@ -49,6 +49,16 @@ properties:
       Delay in nanoseconds to be introduced by the controller after CS is
       asserted.
 
+  spi-cs-hold-delay-ns:
+    description:
+      Delay in nanoseconds to be introduced by the controller before CS is
+      de-asserted.
+
+  spi-cs-inactive-delay-ns:
+    description:
+      Delay in nanoseconds to be introduced by the controller after CS is
+      de-asserted.
+
   spi-rx-bus-width:
     description:
       Bus width to the SPI bus used for read transfers.

Documentation/devicetree/bindings/spi/spi-pl022.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 # We need a select here so we don't match all nodes with 'arm,primecell'
 select:
@@ -45,7 +45,7 @@ properties:
     description: delay in ms following transfer completion before the
       runtime power management system suspends the device. A setting of 0
       indicates no delay and the device will be suspended immediately.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   pl022,rt:
     description: indicates the controller should run the message pump with realtime
@@ -81,7 +81,7 @@ patternProperties:
     properties:
       pl022,interface:
         description: SPI interface type
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         enum:
           - 0      # SPI
           - 1      # Texas Instruments Synchronous Serial Frame Format
@@ -89,7 +89,7 @@ patternProperties:
 
       pl022,com-mode:
         description: Specifies the transfer mode
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         enum:
           - 0      # interrupt mode
           - 1      # polling mode
@@ -98,30 +98,30 @@ patternProperties:
 
       pl022,rx-level-trig:
         description: Rx FIFO watermark level
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 4
 
       pl022,tx-level-trig:
         description: Tx FIFO watermark level
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 4
 
       pl022,ctrl-len:
         description: Microwire interface - Control length
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0x03
         maximum: 0x1f
 
       pl022,wait-state:
         description: Microwire interface - Wait state
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         enum: [0, 1]
 
       pl022,duplex:
         description: Microwire interface - Full/Half duplex
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         enum: [0, 1]
 
 required:

Documentation/devicetree/bindings/spi/spi-rockchip.yaml

@@ -11,7 +11,7 @@ description:
   as flash and display controllers using the SPI communication interface.
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>

Documentation/devicetree/bindings/spi/spi-sifive.yaml

@@ -12,7 +12,7 @@ maintainers:
   - Palmer Dabbelt <palmer@sifive.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:
@@ -51,14 +51,14 @@ properties:
   sifive,fifo-depth:
     description:
       Depth of hardware queues; defaults to 8
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [8]
     default: 8
 
   sifive,max-bits-per-word:
     description:
       Maximum bits per word; defaults to 8
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1, 2, 3, 4, 5, 6, 7, 8]
     default: 8
 

Documentation/devicetree/bindings/spi/spi-st-ssc.txt

-STMicroelectronics SSC (SPI) Controller
----------------------------------------
-
-Required properties:
-- compatible	: "st,comms-ssc4-spi"
-- reg		: Offset and length of the device's register set
-- interrupts	: The interrupt specifier
-- clock-names	: Must contain "ssc"
-- clocks	: Must contain an entry for each name in clock-names
-		    See ../clk/*
-- pinctrl-names	: Uses "default", can use "sleep" if provided
-		    See ../pinctrl/pinctrl-bindings.txt
-
-Optional properties:
-- cs-gpios	: List of GPIO chip selects
-		    See ../spi/spi-bus.txt
-
-Child nodes represent devices on the SPI bus
-  See ../spi/spi-bus.txt
-
-Example:
-	spi@9840000 {
-		compatible	= "st,comms-ssc4-spi";
-		reg		= <0x9840000 0x110>;
-		interrupts	= <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-		clocks		= <&clk_s_c0_flexgen CLK_EXT2F_A9>;
-		clock-names	= "ssc";
-		pinctrl-0	= <&pinctrl_spi0_default>;
-		pinctrl-names	= "default";
-		cs-gpios	= <&pio17 5 0>;
-		#address-cells	= <1>;
-		#size-cells	= <0>;
-
-		st95hf@0{
-			compatible		= "st,st95hf";
-			reg			= <0>;
-			spi-max-frequency	= <1000000>;
-			interrupts		= <2 IRQ_TYPE_EDGE_FALLING>;
-		};
-	};

Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml

@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Sunplus sp7021 SPI controller
 
 allOf:
-  - $ref: "spi-controller.yaml"
+  - $ref: spi-controller.yaml
 
 maintainers:
   - Li-hao Kuo <lhjeff911@gmail.com>
@@ -59,9 +59,9 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi@9C002D80 {
+    spi@9c002d80 {
         compatible = "sunplus,sp7021-spi";
-        reg = <0x9C002D80 0x80>, <0x9C002E00 0x80>;
+        reg = <0x9c002d80 0x80>, <0x9c002e00 0x80>;
         reg-names = "master", "slave";
         interrupt-parent = <&intc>;
         interrupt-names = "dma_w",

Documentation/devicetree/bindings/spi/spi-xilinx.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml

 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Spreadtrum ADI controller
 

Documentation/devicetree/bindings/spi/st,ssc-spi.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,ssc-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics SSC SPI Controller
+
+description: |
+  The STMicroelectronics SSC SPI controller can be found on STi platforms
+  and it used to communicate with external devices using the
+  Serial Peripheral Interface.
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: st,comms-ssc4-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ssc
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stih407-clks.h>
+    spi@9840000 {
+      compatible = "st,comms-ssc4-spi";
+      reg = <0x9840000 0x110>;
+      interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+      clock-names = "ssc";
+      pinctrl-0 = <&pinctrl_spi0_default>;
+      pinctrl-names = "default";
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
+
+...

Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml

@@ -11,7 +11,7 @@ maintainers:
   - Patrice Chotard <patrice.chotard@foss.st.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/spi/st,stm32-spi.yaml

@@ -17,7 +17,7 @@ maintainers:
   - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
   - if:
       properties:
         compatible:
@@ -84,18 +84,17 @@ examples:
     #include <dt-bindings/clock/stm32mp1-clks.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
     spi@4000b000 {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      compatible = "st,stm32h7-spi";
-      reg = <0x4000b000 0x400>;
-      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-      clocks = <&rcc SPI2_K>;
-      resets = <&rcc SPI2_R>;
-      dmas = <&dmamux1 0 39 0x400 0x05>,
-             <&dmamux1 1 40 0x400 0x05>;
-      dma-names = "rx", "tx";
-      cs-gpios = <&gpioa 11 0>;
-
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "st,stm32h7-spi";
+        reg = <0x4000b000 0x400>;
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc SPI2_K>;
+        resets = <&rcc SPI2_R>;
+        dmas = <&dmamux1 0 39 0x400 0x05>,
+               <&dmamux1 1 40 0x400 0x05>;
+        dma-names = "rx", "tx";
+        cs-gpios = <&gpioa 11 0>;
     };
 
 ...

Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml

@@ -11,7 +11,7 @@ description:
   memory devices.
 
 allOf:
-  - $ref: "spi-controller.yaml#"
+  - $ref: spi-controller.yaml#
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>

Documentation/devicetree/bindings/trivial-devices.yaml

@@ -65,6 +65,8 @@ properties:
           - capella,cm3232
             # CM3323: Ambient Light Sensor
           - capella,cm3323
+            # Cisco SPI Petra
+          - cisco,spi-petra
             # High-Precision Digital Thermometer
           - dallas,ds1631
             # Total-Elapsed-Time Recorder with Alarm
@@ -169,6 +171,8 @@ properties:
           - isil,isl29030
             # Intersil ISL68137 Digital Output Configurable PWM Controller
           - isil,isl68137
+            # Linear Technology LTC2488
+          - lineartechnology,ltc2488
             # 5 Bit Programmable, Pulse-Width Modulator
           - maxim,ds1050
             # 10 kOhm digital potentiometer with I2C interface
@@ -227,6 +231,8 @@ properties:
           - memsic,mxc6655
             # Menlo on-board CPLD trivial SPI device
           - menlo,m53cpld
+            # Micron SPI NOR Authenta
+          - micron,spi-authenta
             # Microchip differential I2C ADC, 1 Channel, 18 bit
           - microchip,mcp3421
             # Microchip differential I2C ADC, 2 Channel, 18 bit
@@ -305,10 +311,14 @@ properties:
           - pulsedlight,lidar-lite-v2
             # Renesas ISL29501 time-of-flight sensor
           - renesas,isl29501
+            # Rohm DH2228FV
+          - rohm,dh2228fv
             # S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
           - samsung,24ad0xd1
             # Samsung Exynos SoC SATA PHY I2C device
           - samsung,exynos-sataphy-i2c
+            # Semtech sx1301 baseband processor
+          - semtech,sx1301
             # Sensirion low power multi-pixel gas sensor with I2C interface
           - sensirion,sgpc3
             # Sensirion multi-pixel gas sensor with I2C interface
@@ -323,6 +333,10 @@ properties:
           - sensortek,stk8ba50
             # SGX Sensortech VZ89X Sensors
           - sgx,vz89x
+            # Silicon Labs EM3581 Zigbee SoC with SPI interface
+          - silabs,em3581
+            # Silicon Labs SI3210 Programmable CMOS SLIC/CODEC with SPI interface
+          - silabs,si3210
             # Relative Humidity and Temperature Sensors
           - silabs,si7020
             # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply

Documentation/spi/pxa2xx.rst

@@ -141,15 +141,15 @@ field. Below is a sample configuration using the PXA255 NSSP.
 ::
 
   static struct pxa2xx_spi_chip cs8415a_chip_info = {
-	.tx_threshold = 8, /* SSP hardward FIFO threshold */
-	.rx_threshold = 8, /* SSP hardward FIFO threshold */
+	.tx_threshold = 8, /* SSP hardware FIFO threshold */
+	.rx_threshold = 8, /* SSP hardware FIFO threshold */
 	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
 	.timeout = 235, /* See Intel documentation */
   };
 
   static struct pxa2xx_spi_chip cs8405a_chip_info = {
-	.tx_threshold = 8, /* SSP hardward FIFO threshold */
-	.rx_threshold = 8, /* SSP hardward FIFO threshold */
+	.tx_threshold = 8, /* SSP hardware FIFO threshold */
+	.rx_threshold = 8, /* SSP hardware FIFO threshold */
 	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
 	.timeout = 235, /* See Intel documentation */
   };
@@ -157,7 +157,7 @@ field. Below is a sample configuration using the PXA255 NSSP.
   static struct spi_board_info streetracer_spi_board_info[] __initdata = {
 	{
 		.modalias = "cs8415a", /* Name of spi_driver for this device */
-		.max_speed_hz = 3686400, /* Run SSP as fast a possbile */
+		.max_speed_hz = 3686400, /* Run SSP as fast a possible */
 		.bus_num = 2, /* Framework bus number */
 		.chip_select = 0, /* Framework chip select */
 		.platform_data = NULL; /* No spi_driver specific config */
@@ -166,7 +166,7 @@ field. Below is a sample configuration using the PXA255 NSSP.
 	},
 	{
 		.modalias = "cs8405a", /* Name of spi_driver for this device */
-		.max_speed_hz = 3686400, /* Run SSP as fast a possbile */
+		.max_speed_hz = 3686400, /* Run SSP as fast a possible */
 		.bus_num = 2, /* Framework bus number */
 		.chip_select = 1, /* Framework chip select */
 		.controller_data = &cs8405a_chip_info, /* Master chip config */

Documentation/spi/spi-lm70llp.rst

@@ -57,7 +57,7 @@ devices might share the same SI/SO pin.
 The bitbanger routine in this driver (lm70_txrx) is called back from
 the bound "hwmon/lm70" protocol driver through its sysfs hook, using a
 spi_write_then_read() call.  It performs Mode 0 (SPI/Microwire) bitbanging.
-The lm70 driver then inteprets the resulting digital temperature value
+The lm70 driver then interprets the resulting digital temperature value
 and exports it through sysfs.
 
 A "gotcha": National Semiconductor's LM70 LLP eval board circuit schematic

Documentation/spi/spi-summary.rst

@@ -105,7 +105,7 @@ find isn't necessarily helpful.  The four modes combine two mode bits:
  - CPHA indicates the clock phase used to sample data; CPHA=0 says
    sample on the leading edge, CPHA=1 means the trailing edge.
 
-   Since the signal needs to stablize before it's sampled, CPHA=0
+   Since the signal needs to stabilize before it's sampled, CPHA=0
    implies that its data is written half a clock before the first
    clock edge.  The chipselect may have made it become available.
 

MAINTAINERS

@@ -2925,6 +2925,7 @@ M:	Patrice Chotard <patrice.chotard@foss.st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 W:	http://www.stlinux.com
+F:	Documentation/devicetree/bindings/spi/st,ssc-spi.yaml
 F:	Documentation/devicetree/bindings/i2c/i2c-st.txt
 F:	arch/arm/boot/dts/sti*
 F:	arch/arm/mach-sti/
@@ -4299,6 +4300,17 @@ L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/phy/broadcom/phy-brcm-usb*
 
+BROADCOM Broadband SoC High Speed SPI Controller DRIVER
+M:	William Zhang <william.zhang@broadcom.com>
+M:	Kursad Oney <kursad.oney@broadcom.com>
+M:	Jonas Gorski <jonas.gorski@gmail.com>
+R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
+L:	linux-spi@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml
+F:	drivers/spi/spi-bcm63xx-hsspi.c
+F:	drivers/spi/spi-bcmbca-hsspi.c
+
 BROADCOM ETHERNET PHY DRIVERS
 M:	Florian Fainelli <f.fainelli@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>

drivers/spi/Kconfig

@@ -199,6 +199,15 @@ config SPI_BCM_QSPI
 	  based platforms. This driver works for both SPI master for SPI NOR
 	  flash device as well as MSPI device.
 
+config SPI_BCMBCA_HSSPI
+	tristate "Broadcom BCMBCA HS SPI controller driver"
+	depends on ARCH_BCMBCA || COMPILE_TEST
+	help
+	  This enables support for the High Speed SPI controller present on
+	  newer Broadcom BCMBCA SoCs. These SoCs include an updated SPI controller
+	  that adds the capability to allow the driver to control chip select
+	  explicitly.
+
 config SPI_BITBANG
 	tristate "Utilities for Bitbanging SPI masters"
 	help
@@ -247,7 +256,7 @@ config SPI_CADENCE_XSPI
 	  Enable support for the Cadence XSPI Flash controller.
 
 	  Cadence XSPI is a specialized controller for connecting an SPI
-	  Flash over upto 8bit wide bus. Enable this option if you have a
+	  Flash over up to 8-bit wide bus. Enable this option if you have a
 	  device with a Cadence XSPI controller and want to access the
 	  Flash as an MTD device.
 
@@ -295,7 +304,6 @@ config SPI_DW_BT1
 	tristate "Baikal-T1 SPI driver for DW SPI core"
 	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
 	select MULTIPLEXER
-	select MUX_MMIO
 	help
 	  Baikal-T1 SoC is equipped with three DW APB SSI-based MMIO SPI
 	  controllers. Two of them are pretty much normal: with IRQ, DMA,
@@ -448,19 +456,19 @@ config SPI_INTEL
 	tristate
 
 config SPI_INTEL_PCI
-	tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)"
+	tristate "Intel PCH/PCU SPI flash PCI driver"
 	depends on PCI
 	depends on X86 || COMPILE_TEST
 	depends on SPI_MEM
 	select SPI_INTEL
 	help
 	  This enables PCI support for the Intel PCH/PCU SPI controller in
-	  master mode. This controller is present in modern Intel hardware
-	  and is used to hold BIOS and other persistent settings. Using
-	  this driver it is possible to upgrade BIOS directly from Linux.
-
-	  Say N here unless you know what you are doing. Overwriting the
-	  SPI flash may render the system unbootable.
+	  master mode. This controller is used to hold BIOS and other
+	  persistent settings. Controllers present in modern Intel hardware
+	  only work in hardware sequencing mode, this means that the
+	  controller exposes a subset of operations that makes it safer to
+	  use. Using this driver it is possible to upgrade BIOS directly
+	  from Linux.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called spi-intel-pci.
@@ -472,10 +480,11 @@ config SPI_INTEL_PLATFORM
 	select SPI_INTEL
 	help
 	  This enables platform support for the Intel PCH/PCU SPI
-	  controller in master mode. This controller is present in modern
-	  Intel hardware and is used to hold BIOS and other persistent
-	  settings. Using this driver it is possible to upgrade BIOS
-	  directly from Linux.
+	  controller in master mode that is used to hold BIOS and other
+	  persistent settings. Most of these controllers work in
+	  software sequencing mode, which means that the controller
+	  exposes the low level SPI-NOR opcodes to the software. Using
+	  this driver it is possible to upgrade BIOS directly from Linux.
 
 	  Say N here unless you know what you are doing. Overwriting the
 	  SPI flash may render the system unbootable.
@@ -1166,9 +1175,6 @@ config SPI_SPIDEV
 	help
 	  This supports user mode SPI protocol drivers.
 
-	  Note that this application programming interface is EXPERIMENTAL
-	  and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes.
-
 config SPI_LOOPBACK_TEST
 	tristate "spi loopback test framework support"
 	depends on m

drivers/spi/Makefile

@@ -30,6 +30,7 @@ obj-$(CONFIG_SPI_BCM2835)		+= spi-bcm2835.o
 obj-$(CONFIG_SPI_BCM2835AUX)		+= spi-bcm2835aux.o
 obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o
 obj-$(CONFIG_SPI_BCM63XX_HSSPI)		+= spi-bcm63xx-hsspi.o
+obj-$(CONFIG_SPI_BCMBCA_HSSPI)		+= spi-bcmbca-hsspi.o
 obj-$(CONFIG_SPI_BCM_QSPI)		+= spi-iproc-qspi.o spi-brcmstb-qspi.o spi-bcm-qspi.o
 obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi-butterfly.o

drivers/spi/atmel-quadspi.c

@@ -406,7 +406,7 @@ static int atmel_qspi_set_cfg(struct atmel_qspi *aq,
 
 static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 {
-	struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->master);
+	struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->controller);
 	u32 sr, offset;
 	int err;
 
@@ -476,7 +476,7 @@ static const struct spi_controller_mem_ops atmel_qspi_mem_ops = {
 
 static int atmel_qspi_setup(struct spi_device *spi)
 {
-	struct spi_controller *ctrl = spi->master;
+	struct spi_controller *ctrl = spi->controller;
 	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
 	unsigned long src_rate;
 	u32 scbr;
@@ -512,7 +512,7 @@ static int atmel_qspi_setup(struct spi_device *spi)
 
 static int atmel_qspi_set_cs_timing(struct spi_device *spi)
 {
-	struct spi_controller *ctrl = spi->master;
+	struct spi_controller *ctrl = spi->controller;
 	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
 	unsigned long clk_rate;
 	u32 cs_setup;
@@ -582,7 +582,7 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 	struct resource *res;
 	int irq, err = 0;
 
-	ctrl = devm_spi_alloc_master(&pdev->dev, sizeof(*aq));
+	ctrl = devm_spi_alloc_host(&pdev->dev, sizeof(*aq));
 	if (!ctrl)
 		return -ENOMEM;
 

drivers/spi/spi-altera-core.c

@@ -24,7 +24,7 @@
 #define ALTERA_SPI_TXDATA	4
 #define ALTERA_SPI_STATUS	8
 #define ALTERA_SPI_CONTROL	12
-#define ALTERA_SPI_SLAVE_SEL	20
+#define ALTERA_SPI_TARGET_SEL	20
 
 #define ALTERA_SPI_STATUS_ROE_MSK	0x8
 #define ALTERA_SPI_STATUS_TOE_MSK	0x10
@@ -67,7 +67,7 @@ static int altr_spi_readl(struct altera_spi *hw, unsigned int reg,
 
 static inline struct altera_spi *altera_spi_to_hw(struct spi_device *sdev)
 {
-	return spi_master_get_devdata(sdev->master);
+	return spi_controller_get_devdata(sdev->controller);
 }
 
 static void altera_spi_set_cs(struct spi_device *spi, bool is_high)
@@ -77,9 +77,9 @@ static void altera_spi_set_cs(struct spi_device *spi, bool is_high)
 	if (is_high) {
 		hw->imr &= ~ALTERA_SPI_CONTROL_SSO_MSK;
 		altr_spi_writel(hw, ALTERA_SPI_CONTROL, hw->imr);
-		altr_spi_writel(hw, ALTERA_SPI_SLAVE_SEL, 0);
+		altr_spi_writel(hw, ALTERA_SPI_TARGET_SEL, 0);
 	} else {
-		altr_spi_writel(hw, ALTERA_SPI_SLAVE_SEL,
+		altr_spi_writel(hw, ALTERA_SPI_TARGET_SEL,
 				BIT(spi->chip_select));
 		hw->imr |= ALTERA_SPI_CONTROL_SSO_MSK;
 		altr_spi_writel(hw, ALTERA_SPI_CONTROL, hw->imr);
@@ -139,10 +139,10 @@ static void altera_spi_rx_word(struct altera_spi *hw)
 	hw->count++;
 }
 
-static int altera_spi_txrx(struct spi_master *master,
+static int altera_spi_txrx(struct spi_controller *host,
 	struct spi_device *spi, struct spi_transfer *t)
 {
-	struct altera_spi *hw = spi_master_get_devdata(master);
+	struct altera_spi *hw = spi_controller_get_devdata(host);
 	u32 val;
 
 	hw->tx = t->tx_buf;
@@ -175,15 +175,15 @@ static int altera_spi_txrx(struct spi_master *master,
 
 		altera_spi_rx_word(hw);
 	}
-	spi_finalize_current_transfer(master);
+	spi_finalize_current_transfer(host);
 
 	return 0;
 }
 
 irqreturn_t altera_spi_irq(int irq, void *dev)
 {
-	struct spi_master *master = dev;
-	struct altera_spi *hw = spi_master_get_devdata(master);
+	struct spi_controller *host = dev;
+	struct altera_spi *hw = spi_controller_get_devdata(host);
 
 	altera_spi_rx_word(hw);
 
@@ -194,20 +194,20 @@ irqreturn_t altera_spi_irq(int irq, void *dev)
 		hw->imr &= ~ALTERA_SPI_CONTROL_IRRDY_MSK;
 		altr_spi_writel(hw, ALTERA_SPI_CONTROL, hw->imr);
 
-		spi_finalize_current_transfer(master);
+		spi_finalize_current_transfer(host);
 	}
 
 	return IRQ_HANDLED;
 }
 EXPORT_SYMBOL_GPL(altera_spi_irq);
 
-void altera_spi_init_master(struct spi_master *master)
+void altera_spi_init_host(struct spi_controller *host)
 {
-	struct altera_spi *hw = spi_master_get_devdata(master);
+	struct altera_spi *hw = spi_controller_get_devdata(host);
 	u32 val;
 
-	master->transfer_one = altera_spi_txrx;
-	master->set_cs = altera_spi_set_cs;
+	host->transfer_one = altera_spi_txrx;
+	host->set_cs = altera_spi_set_cs;
 
 	/* program defaults into the registers */
 	hw->imr = 0;		/* disable spi interrupts */
@@ -217,6 +217,6 @@ void altera_spi_init_master(struct spi_master *master)
 	if (val & ALTERA_SPI_STATUS_RRDY_MSK)
 		altr_spi_readl(hw, ALTERA_SPI_RXDATA, &val); /* flush rxdata */
 }
-EXPORT_SYMBOL_GPL(altera_spi_init_master);
+EXPORT_SYMBOL_GPL(altera_spi_init_host);
 
 MODULE_LICENSE("GPL");

drivers/spi/spi-altera-dfl.c

@@ -104,20 +104,20 @@ static const struct regmap_config indirect_regbus_cfg = {
 	.reg_read = indirect_bus_reg_read,
 };
 
-static void config_spi_master(void __iomem *base, struct spi_master *master)
+static void config_spi_host(void __iomem *base, struct spi_controller *host)
 {
 	u64 v;
 
 	v = readq(base + SPI_CORE_PARAMETER);
 
-	master->mode_bits = SPI_CS_HIGH;
+	host->mode_bits = SPI_CS_HIGH;
 	if (FIELD_GET(CLK_POLARITY, v))
-		master->mode_bits |= SPI_CPOL;
+		host->mode_bits |= SPI_CPOL;
 	if (FIELD_GET(CLK_PHASE, v))
-		master->mode_bits |= SPI_CPHA;
+		host->mode_bits |= SPI_CPHA;
 
-	master->num_chipselect = FIELD_GET(NUM_CHIPSELECT, v);
-	master->bits_per_word_mask =
+	host->num_chipselect = FIELD_GET(NUM_CHIPSELECT, v);
+	host->bits_per_word_mask =
 		SPI_BPW_RANGE_MASK(1, FIELD_GET(DATA_WIDTH, v));
 }
 
@@ -125,18 +125,18 @@ static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
 {
 	struct spi_board_info board_info = { 0 };
 	struct device *dev = &dfl_dev->dev;
-	struct spi_master *master;
+	struct spi_controller *host;
 	struct altera_spi *hw;
 	void __iomem *base;
 	int err;
 
-	master = devm_spi_alloc_master(dev, sizeof(struct altera_spi));
-	if (!master)
+	host = devm_spi_alloc_host(dev, sizeof(struct altera_spi));
+	if (!host)
 		return -ENOMEM;
 
-	master->bus_num = -1;
+	host->bus_num = -1;
 
-	hw = spi_master_get_devdata(master);
+	hw = spi_controller_get_devdata(host);
 
 	hw->dev = dev;
 
@@ -145,10 +145,10 @@ static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
-	config_spi_master(base, master);
+	config_spi_host(base, host);
 	dev_dbg(dev, "%s cs %u bpm 0x%x mode 0x%x\n", __func__,
-		master->num_chipselect, master->bits_per_word_mask,
-		master->mode_bits);
+		host->num_chipselect, host->bits_per_word_mask,
+		host->mode_bits);
 
 	hw->regmap = devm_regmap_init(dev, NULL, base, &indirect_regbus_cfg);
 	if (IS_ERR(hw->regmap))
@@ -156,11 +156,11 @@ static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
 
 	hw->irq = -EINVAL;
 
-	altera_spi_init_master(master);
+	altera_spi_init_host(host);
 
-	err = devm_spi_register_master(dev, master);
+	err = devm_spi_register_controller(dev, host);
 	if (err)
-		return dev_err_probe(dev, err, "%s failed to register spi master\n",
+		return dev_err_probe(dev, err, "%s failed to register spi host\n",
 				     __func__);
 
 	if (dfl_dev->revision == FME_FEATURE_REV_MAX10_SPI_N5010)
@@ -172,7 +172,7 @@ static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
 	board_info.bus_num = 0;
 	board_info.chip_select = 0;
 
-	if (!spi_new_device(master, &board_info)) {
+	if (!spi_new_device(host, &board_info)) {
 		dev_err(dev, "%s failed to create SPI device: %s\n",
 			__func__, board_info.modalias);
 	}

drivers/spi/spi-altera-platform.c

@@ -39,16 +39,16 @@ static int altera_spi_probe(struct platform_device *pdev)
 	struct altera_spi_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	enum altera_spi_type type = ALTERA_SPI_TYPE_UNKNOWN;
 	struct altera_spi *hw;
-	struct spi_master *master;
+	struct spi_controller *host;
 	int err = -ENODEV;
 	u16 i;
 
-	master = spi_alloc_master(&pdev->dev, sizeof(struct altera_spi));
-	if (!master)
+	host = spi_alloc_host(&pdev->dev, sizeof(struct altera_spi));
+	if (!host)
 		return err;
 
-	/* setup the master state. */
-	master->bus_num = -1;
+	/* setup the host state. */
+	host->bus_num = -1;
 
 	if (pdata) {
 		if (pdata->num_chipselect > ALTERA_SPI_MAX_CS) {
@@ -59,18 +59,18 @@ static int altera_spi_probe(struct platform_device *pdev)
 			goto exit;
 		}
 
-		master->num_chipselect = pdata->num_chipselect;
-		master->mode_bits = pdata->mode_bits;
-		master->bits_per_word_mask = pdata->bits_per_word_mask;
+		host->num_chipselect = pdata->num_chipselect;
+		host->mode_bits = pdata->mode_bits;
+		host->bits_per_word_mask = pdata->bits_per_word_mask;
 	} else {
-		master->num_chipselect = 16;
-		master->mode_bits = SPI_CS_HIGH;
-		master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16);
+		host->num_chipselect = 16;
+		host->mode_bits = SPI_CS_HIGH;
+		host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16);
 	}
 
-	master->dev.of_node = pdev->dev.of_node;
+	host->dev.of_node = pdev->dev.of_node;
 
-	hw = spi_master_get_devdata(master);
+	hw = spi_controller_get_devdata(host);
 	hw->dev = &pdev->dev;
 
 	if (platid)
@@ -107,24 +107,24 @@ static int altera_spi_probe(struct platform_device *pdev)
 		}
 	}
 
-	altera_spi_init_master(master);
+	altera_spi_init_host(host);
 
 	/* irq is optional */
 	hw->irq = platform_get_irq(pdev, 0);
 	if (hw->irq >= 0) {
 		err = devm_request_irq(&pdev->dev, hw->irq, altera_spi_irq, 0,
-				       pdev->name, master);
+				       pdev->name, host);
 		if (err)
 			goto exit;
 	}
 
-	err = devm_spi_register_master(&pdev->dev, master);
+	err = devm_spi_register_controller(&pdev->dev, host);
 	if (err)
 		goto exit;
 
 	if (pdata) {
 		for (i = 0; i < pdata->num_devices; i++) {
-			if (!spi_new_device(master, pdata->devices + i))
+			if (!spi_new_device(host, pdata->devices + i))
 				dev_warn(&pdev->dev,
 					 "unable to create SPI device: %s\n",
 					 pdata->devices[i].modalias);
@@ -135,7 +135,7 @@ static int altera_spi_probe(struct platform_device *pdev)
 
 	return 0;
 exit:
-	spi_master_put(master);
+	spi_controller_put(host);
 	return err;
 }
 

drivers/spi/spi-ar934x.c

@@ -61,7 +61,7 @@ static inline int ar934x_spi_clk_div(struct ar934x_spi *sp, unsigned int freq)
 
 static int ar934x_spi_setup(struct spi_device *spi)
 {
-	struct ar934x_spi *sp = spi_controller_get_devdata(spi->master);
+	struct ar934x_spi *sp = spi_controller_get_devdata(spi->controller);
 
 	if ((spi->max_speed_hz == 0) ||
 	    (spi->max_speed_hz > (sp->clk_freq / 2))) {
@@ -74,10 +74,10 @@ static int ar934x_spi_setup(struct spi_device *spi)
 	return 0;
 }
 
-static int ar934x_spi_transfer_one_message(struct spi_controller *master,
+static int ar934x_spi_transfer_one_message(struct spi_controller *ctlr,
 					   struct spi_message *m)
 {
-	struct ar934x_spi *sp = spi_controller_get_devdata(master);
+	struct ar934x_spi *sp = spi_controller_get_devdata(ctlr);
 	struct spi_transfer *t = NULL;
 	struct spi_device *spi = m->spi;
 	unsigned long trx_done, trx_cur;
@@ -150,7 +150,7 @@ static int ar934x_spi_transfer_one_message(struct spi_controller *master,
 
 msg_done:
 	m->status = stat;
-	spi_finalize_current_message(master);
+	spi_finalize_current_message(ctlr);
 
 	return 0;
 }
@@ -183,7 +183,7 @@ static int ar934x_spi_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ctlr = devm_spi_alloc_master(&pdev->dev, sizeof(*sp));
+	ctlr = devm_spi_alloc_host(&pdev->dev, sizeof(*sp));
 	if (!ctlr) {
 		dev_info(&pdev->dev, "failed to allocate spi controller\n");
 		ret = -ENOMEM;

drivers/spi/spi-armada-3700.c

@@ -100,7 +100,7 @@
 #define A3700_SPI_CLK_CAPT_EDGE		BIT(7)
 
 struct a3700_spi {
-	struct spi_master *master;
+	struct spi_controller *host;
 	void __iomem *base;
 	struct clk *clk;
 	unsigned int irq;
@@ -174,7 +174,7 @@ static int a3700_spi_pin_mode_set(struct a3700_spi *a3700_spi,
 			val |= A3700_SPI_ADDR_PIN;
 		break;
 	default:
-		dev_err(&a3700_spi->master->dev, "wrong pin mode %u", pin_mode);
+		dev_err(&a3700_spi->host->dev, "wrong pin mode %u", pin_mode);
 		return -EINVAL;
 	}
 
@@ -278,7 +278,7 @@ static int a3700_spi_fifo_flush(struct a3700_spi *a3700_spi)
 
 static void a3700_spi_init(struct a3700_spi *a3700_spi)
 {
-	struct spi_master *master = a3700_spi->master;
+	struct spi_controller *host = a3700_spi->host;
 	u32 val;
 	int i;
 
@@ -295,14 +295,14 @@ static void a3700_spi_init(struct a3700_spi *a3700_spi)
 
 	/* Disable AUTO_CS and deactivate all chip-selects */
 	a3700_spi_auto_cs_unset(a3700_spi);
-	for (i = 0; i < master->num_chipselect; i++)
+	for (i = 0; i < host->num_chipselect; i++)
 		a3700_spi_deactivate_cs(a3700_spi, i);
 
 	/* Enable FIFO mode */
 	a3700_spi_fifo_mode_set(a3700_spi, true);
 
 	/* Set SPI mode */
-	a3700_spi_mode_set(a3700_spi, master->mode_bits);
+	a3700_spi_mode_set(a3700_spi, host->mode_bits);
 
 	/* Reset counters */
 	spireg_write(a3700_spi, A3700_SPI_IF_HDR_CNT_REG, 0);
@@ -315,11 +315,11 @@ static void a3700_spi_init(struct a3700_spi *a3700_spi)
 
 static irqreturn_t a3700_spi_interrupt(int irq, void *dev_id)
 {
-	struct spi_master *master = dev_id;
+	struct spi_controller *host = dev_id;
 	struct a3700_spi *a3700_spi;
 	u32 cause;
 
-	a3700_spi = spi_master_get_devdata(master);
+	a3700_spi = spi_controller_get_devdata(host);
 
 	/* Get interrupt causes */
 	cause = spireg_read(a3700_spi, A3700_SPI_INT_STAT_REG);
@@ -344,7 +344,7 @@ static bool a3700_spi_wait_completion(struct spi_device *spi)
 	unsigned int ctrl_reg;
 	unsigned long timeout_jiffies;
 
-	a3700_spi = spi_master_get_devdata(spi->master);
+	a3700_spi = spi_controller_get_devdata(spi->controller);
 
 	/* SPI interrupt is edge-triggered, which means an interrupt will
 	 * be generated only when detecting a specific status bit changed
@@ -393,7 +393,7 @@ static bool a3700_spi_transfer_wait(struct spi_device *spi,
 {
 	struct a3700_spi *a3700_spi;
 
-	a3700_spi = spi_master_get_devdata(spi->master);
+	a3700_spi = spi_controller_get_devdata(spi->controller);
 	a3700_spi->wait_mask = bit_mask;
 
 	return a3700_spi_wait_completion(spi);
@@ -417,7 +417,7 @@ static void a3700_spi_transfer_setup(struct spi_device *spi,
 {
 	struct a3700_spi *a3700_spi;
 
-	a3700_spi = spi_master_get_devdata(spi->master);
+	a3700_spi = spi_controller_get_devdata(spi->controller);
 
 	a3700_spi_clock_set(a3700_spi, xfer->speed_hz);
 
@@ -434,7 +434,7 @@ static void a3700_spi_transfer_setup(struct spi_device *spi,
 
 static void a3700_spi_set_cs(struct spi_device *spi, bool enable)
 {
-	struct a3700_spi *a3700_spi = spi_master_get_devdata(spi->master);
+	struct a3700_spi *a3700_spi = spi_controller_get_devdata(spi->controller);
 
 	if (!enable)
 		a3700_spi_activate_cs(a3700_spi, spi->chip_select);
@@ -565,10 +565,10 @@ static void a3700_spi_transfer_abort_fifo(struct a3700_spi *a3700_spi)
 	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
 }
 
-static int a3700_spi_prepare_message(struct spi_master *master,
+static int a3700_spi_prepare_message(struct spi_controller *host,
 				     struct spi_message *message)
 {
-	struct a3700_spi *a3700_spi = spi_master_get_devdata(master);
+	struct a3700_spi *a3700_spi = spi_controller_get_devdata(host);
 	struct spi_device *spi = message->spi;
 	int ret;
 
@@ -588,11 +588,11 @@ static int a3700_spi_prepare_message(struct spi_master *master,
 	return 0;
 }
 
-static int a3700_spi_transfer_one_fifo(struct spi_master *master,
+static int a3700_spi_transfer_one_fifo(struct spi_controller *host,
 				  struct spi_device *spi,
 				  struct spi_transfer *xfer)
 {
-	struct a3700_spi *a3700_spi = spi_master_get_devdata(master);
+	struct a3700_spi *a3700_spi = spi_controller_get_devdata(host);
 	int ret = 0, timeout = A3700_SPI_TIMEOUT;
 	unsigned int nbits = 0, byte_len;
 	u32 val;
@@ -732,16 +732,16 @@ static int a3700_spi_transfer_one_fifo(struct spi_master *master,
 error:
 	a3700_spi_transfer_abort_fifo(a3700_spi);
 out:
-	spi_finalize_current_transfer(master);
+	spi_finalize_current_transfer(host);
 
 	return ret;
 }
 
-static int a3700_spi_transfer_one_full_duplex(struct spi_master *master,
+static int a3700_spi_transfer_one_full_duplex(struct spi_controller *host,
 				  struct spi_device *spi,
 				  struct spi_transfer *xfer)
 {
-	struct a3700_spi *a3700_spi = spi_master_get_devdata(master);
+	struct a3700_spi *a3700_spi = spi_controller_get_devdata(host);
 	u32 val;
 
 	/* Disable FIFO mode */
@@ -777,27 +777,27 @@ static int a3700_spi_transfer_one_full_duplex(struct spi_master *master,
 
 	}
 
-	spi_finalize_current_transfer(master);
+	spi_finalize_current_transfer(host);
 
 	return 0;
 }
 
-static int a3700_spi_transfer_one(struct spi_master *master,
+static int a3700_spi_transfer_one(struct spi_controller *host,
 				  struct spi_device *spi,
 				  struct spi_transfer *xfer)
 {
 	a3700_spi_transfer_setup(spi, xfer);
 
 	if (xfer->tx_buf && xfer->rx_buf)
-		return a3700_spi_transfer_one_full_duplex(master, spi, xfer);
+		return a3700_spi_transfer_one_full_duplex(host, spi, xfer);
 
-	return a3700_spi_transfer_one_fifo(master, spi, xfer);
+	return a3700_spi_transfer_one_fifo(host, spi, xfer);
 }
 
-static int a3700_spi_unprepare_message(struct spi_master *master,
+static int a3700_spi_unprepare_message(struct spi_controller *host,
 				       struct spi_message *message)
 {
-	struct a3700_spi *a3700_spi = spi_master_get_devdata(master);
+	struct a3700_spi *a3700_spi = spi_controller_get_devdata(host);
 
 	clk_disable(a3700_spi->clk);
 
@@ -815,14 +815,14 @@ static int a3700_spi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *of_node = dev->of_node;
-	struct spi_master *master;
+	struct spi_controller *host;
 	struct a3700_spi *spi;
 	u32 num_cs = 0;
 	int irq, ret = 0;
 
-	master = spi_alloc_master(dev, sizeof(*spi));
-	if (!master) {
-		dev_err(dev, "master allocation failed\n");
+	host = spi_alloc_host(dev, sizeof(*spi));
+	if (!host) {
+		dev_err(dev, "host allocation failed\n");
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -833,23 +833,23 @@ static int a3700_spi_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	master->bus_num = pdev->id;
-	master->dev.of_node = of_node;
-	master->mode_bits = SPI_MODE_3;
-	master->num_chipselect = num_cs;
-	master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(32);
-	master->prepare_message =  a3700_spi_prepare_message;
-	master->transfer_one = a3700_spi_transfer_one;
-	master->unprepare_message = a3700_spi_unprepare_message;
-	master->set_cs = a3700_spi_set_cs;
-	master->mode_bits |= (SPI_RX_DUAL | SPI_TX_DUAL |
+	host->bus_num = pdev->id;
+	host->dev.of_node = of_node;
+	host->mode_bits = SPI_MODE_3;
+	host->num_chipselect = num_cs;
+	host->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(32);
+	host->prepare_message =  a3700_spi_prepare_message;
+	host->transfer_one = a3700_spi_transfer_one;
+	host->unprepare_message = a3700_spi_unprepare_message;
+	host->set_cs = a3700_spi_set_cs;
+	host->mode_bits |= (SPI_RX_DUAL | SPI_TX_DUAL |
 			      SPI_RX_QUAD | SPI_TX_QUAD);
 
-	platform_set_drvdata(pdev, master);
+	platform_set_drvdata(pdev, host);
 
-	spi = spi_master_get_devdata(master);
+	spi = spi_controller_get_devdata(host);
 
-	spi->master = master;
+	spi->host = host;
 
 	spi->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(spi->base)) {
@@ -878,23 +878,23 @@ static int a3700_spi_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	master->max_speed_hz = min_t(unsigned long, A3700_SPI_MAX_SPEED_HZ,
+	host->max_speed_hz = min_t(unsigned long, A3700_SPI_MAX_SPEED_HZ,
 					clk_get_rate(spi->clk));
-	master->min_speed_hz = DIV_ROUND_UP(clk_get_rate(spi->clk),
+	host->min_speed_hz = DIV_ROUND_UP(clk_get_rate(spi->clk),
 						A3700_SPI_MAX_PRESCALE);
 
 	a3700_spi_init(spi);
 
 	ret = devm_request_irq(dev, spi->irq, a3700_spi_interrupt, 0,
-			       dev_name(dev), master);
+			       dev_name(dev), host);
 	if (ret) {
 		dev_err(dev, "could not request IRQ: %d\n", ret);
 		goto error_clk;
 	}
 
-	ret = devm_spi_register_master(dev, master);
+	ret = devm_spi_register_controller(dev, host);
 	if (ret) {
-		dev_err(dev, "Failed to register master\n");
+		dev_err(dev, "Failed to register host\n");
 		goto error_clk;
 	}
 
@@ -903,15 +903,15 @@ static int a3700_spi_probe(struct platform_device *pdev)
 error_clk:
 	clk_unprepare(spi->clk);
 error:
-	spi_master_put(master);
+	spi_controller_put(host);
 out:
 	return ret;
 }
 
 static int a3700_spi_remove(struct platform_device *pdev)
 {
-	struct spi_master *master = platform_get_drvdata(pdev);
-	struct a3700_spi *spi = spi_master_get_devdata(master);
+	struct spi_controller *host = platform_get_drvdata(pdev);
+	struct a3700_spi *spi = spi_controller_get_devdata(host);
 
 	clk_unprepare(spi->clk);
 

drivers/spi/spi-at91-usart.c

@@ -38,7 +38,7 @@
 #define US_CR_TXEN		BIT(6)
 #define US_CR_TXDIS		BIT(7)
 
-#define US_MR_SPI_MASTER	0x0E
+#define US_MR_SPI_HOST		0x0E
 #define US_MR_CHRL		GENMASK(7, 6)
 #define US_MR_CPHA		BIT(8)
 #define US_MR_CPOL		BIT(16)
@@ -61,7 +61,7 @@
 #define US_OVRE_RXRDY_IRQS	(US_IR_OVRE | US_IR_RXRDY)
 
 #define US_INIT \
-	(US_MR_SPI_MASTER | US_MR_CHRL | US_MR_CLKO | US_MR_WRDBT)
+	(US_MR_SPI_HOST | US_MR_CHRL | US_MR_CLKO | US_MR_WRDBT)
 #define US_DMA_MIN_BYTES       16
 #define US_DMA_TIMEOUT         (msecs_to_jiffies(1000))
 
@@ -104,7 +104,7 @@ struct at91_usart_spi {
 static void dma_callback(void *data)
 {
 	struct spi_controller   *ctlr = data;
-	struct at91_usart_spi   *aus = spi_master_get_devdata(ctlr);
+	struct at91_usart_spi   *aus = spi_controller_get_devdata(ctlr);
 
 	at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
 	aus->current_rx_remaining_bytes = 0;
@@ -115,7 +115,7 @@ static bool at91_usart_spi_can_dma(struct spi_controller *ctrl,
 				   struct spi_device *spi,
 				   struct spi_transfer *xfer)
 {
-	struct at91_usart_spi *aus = spi_master_get_devdata(ctrl);
+	struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);
 
 	return aus->use_dma && xfer->len >= US_DMA_MIN_BYTES;
 }
@@ -216,7 +216,7 @@ static void at91_usart_spi_stop_dma(struct spi_controller *ctlr)
 static int at91_usart_spi_dma_transfer(struct spi_controller *ctlr,
 				       struct spi_transfer *xfer)
 {
-	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
 	struct dma_chan	 *rxchan = ctlr->dma_rx;
 	struct dma_chan *txchan = ctlr->dma_tx;
 	struct dma_async_tx_descriptor *rxdesc;
@@ -334,7 +334,7 @@ at91_usart_spi_set_xfer_speed(struct at91_usart_spi *aus,
 static irqreturn_t at91_usart_spi_interrupt(int irq, void *dev_id)
 {
 	struct spi_controller *controller = dev_id;
-	struct at91_usart_spi *aus = spi_master_get_devdata(controller);
+	struct at91_usart_spi *aus = spi_controller_get_devdata(controller);
 
 	spin_lock(&aus->lock);
 	at91_usart_spi_read_status(aus);
@@ -359,7 +359,7 @@ static irqreturn_t at91_usart_spi_interrupt(int irq, void *dev_id)
 
 static int at91_usart_spi_setup(struct spi_device *spi)
 {
-	struct at91_usart_spi *aus = spi_master_get_devdata(spi->controller);
+	struct at91_usart_spi *aus = spi_controller_get_devdata(spi->controller);
 	u32 *ausd = spi->controller_state;
 	unsigned int mr = at91_usart_spi_readl(aus, MR);
 
@@ -399,7 +399,7 @@ static int at91_usart_spi_transfer_one(struct spi_controller *ctlr,
 				       struct spi_device *spi,
 				       struct spi_transfer *xfer)
 {
-	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
 	unsigned long dma_timeout = 0;
 	int ret = 0;
 
@@ -444,7 +444,7 @@ static int at91_usart_spi_transfer_one(struct spi_controller *ctlr,
 static int at91_usart_spi_prepare_message(struct spi_controller *ctlr,
 					  struct spi_message *message)
 {
-	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
 	struct spi_device *spi = message->spi;
 	u32 *ausd = spi->controller_state;
 
@@ -458,7 +458,7 @@ static int at91_usart_spi_prepare_message(struct spi_controller *ctlr,
 static int at91_usart_spi_unprepare_message(struct spi_controller *ctlr,
 					    struct spi_message *message)
 {
-	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
 
 	at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
 	at91_usart_spi_writel(aus, IDR, US_OVRE_RXRDY_IRQS);
@@ -515,7 +515,7 @@ static int at91_usart_spi_probe(struct platform_device *pdev)
 		return PTR_ERR(clk);
 
 	ret = -ENOMEM;
-	controller = spi_alloc_master(&pdev->dev, sizeof(*aus));
+	controller = spi_alloc_host(&pdev->dev, sizeof(*aus));
 	if (!controller)
 		goto at91_usart_spi_probe_fail;
 
@@ -539,7 +539,7 @@ static int at91_usart_spi_probe(struct platform_device *pdev)
 						US_MAX_CLK_DIV);
 	platform_set_drvdata(pdev, controller);
 
-	aus = spi_master_get_devdata(controller);
+	aus = spi_controller_get_devdata(controller);
 
 	aus->dev = &pdev->dev;
 	aus->regs = devm_ioremap_resource(&pdev->dev, regs);
@@ -574,9 +574,9 @@ static int at91_usart_spi_probe(struct platform_device *pdev)
 	spin_lock_init(&aus->lock);
 	init_completion(&aus->xfer_completion);
 
-	ret = devm_spi_register_master(&pdev->dev, controller);
+	ret = devm_spi_register_controller(&pdev->dev, controller);
 	if (ret)
-		goto at91_usart_fail_register_master;
+		goto at91_usart_fail_register_controller;
 
 	dev_info(&pdev->dev,
 		 "AT91 USART SPI Controller version 0x%x at %pa (irq %d)\n",
@@ -585,19 +585,19 @@ static int at91_usart_spi_probe(struct platform_device *pdev)
 
 	return 0;
 
-at91_usart_fail_register_master:
+at91_usart_fail_register_controller:
 	at91_usart_spi_release_dma(controller);
 at91_usart_fail_dma:
 	clk_disable_unprepare(clk);
 at91_usart_spi_probe_fail:
-	spi_master_put(controller);
+	spi_controller_put(controller);
 	return ret;
 }
 
 __maybe_unused static int at91_usart_spi_runtime_suspend(struct device *dev)
 {
 	struct spi_controller *ctlr = dev_get_drvdata(dev);
-	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
 
 	clk_disable_unprepare(aus->clk);
 	pinctrl_pm_select_sleep_state(dev);
@@ -608,7 +608,7 @@ __maybe_unused static int at91_usart_spi_runtime_suspend(struct device *dev)
 __maybe_unused static int at91_usart_spi_runtime_resume(struct device *dev)
 {
 	struct spi_controller *ctrl = dev_get_drvdata(dev);
-	struct at91_usart_spi *aus = spi_master_get_devdata(ctrl);
+	struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);
 
 	pinctrl_pm_select_default_state(dev);
 
@@ -633,7 +633,7 @@ __maybe_unused static int at91_usart_spi_suspend(struct device *dev)
 __maybe_unused static int at91_usart_spi_resume(struct device *dev)
 {
 	struct spi_controller *ctrl = dev_get_drvdata(dev);
-	struct at91_usart_spi *aus = spi_master_get_devdata(ctrl);
+	struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);
 	int ret;
 
 	if (!pm_runtime_suspended(dev)) {
@@ -650,7 +650,7 @@ __maybe_unused static int at91_usart_spi_resume(struct device *dev)
 static int at91_usart_spi_remove(struct platform_device *pdev)
 {
 	struct spi_controller *ctlr = platform_get_drvdata(pdev);
-	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
 
 	at91_usart_spi_release_dma(ctlr);
 	clk_disable_unprepare(aus->clk);

drivers/spi/spi-ath79.c

@@ -58,7 +58,7 @@ static inline void ath79_spi_wr(struct ath79_spi *sp, unsigned int reg, u32 val)
 
 static inline struct ath79_spi *ath79_spidev_to_sp(struct spi_device *spi)
 {
-	return spi_master_get_devdata(spi->master);
+	return spi_controller_get_devdata(spi->controller);
 }
 
 static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned int nsecs)
@@ -120,7 +120,7 @@ static u32 ath79_spi_txrx_mode0(struct spi_device *spi, unsigned int nsecs,
 		else
 			out = ioc & ~AR71XX_SPI_IOC_DO;
 
-		/* setup MSB (to slave) on trailing edge */
+		/* setup MSB (to target) on trailing edge */
 		ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
 		ath79_spi_delay(sp, nsecs);
 		ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
@@ -168,28 +168,28 @@ static const struct spi_controller_mem_ops ath79_mem_ops = {
 
 static int ath79_spi_probe(struct platform_device *pdev)
 {
-	struct spi_master *master;
+	struct spi_controller *host;
 	struct ath79_spi *sp;
 	unsigned long rate;
 	int ret;
 
-	master = spi_alloc_master(&pdev->dev, sizeof(*sp));
-	if (master == NULL) {
-		dev_err(&pdev->dev, "failed to allocate spi master\n");
+	host = spi_alloc_host(&pdev->dev, sizeof(*sp));
+	if (host == NULL) {
+		dev_err(&pdev->dev, "failed to allocate spi host\n");
 		return -ENOMEM;
 	}
 
-	sp = spi_master_get_devdata(master);
-	master->dev.of_node = pdev->dev.of_node;
+	sp = spi_controller_get_devdata(host);
+	host->dev.of_node = pdev->dev.of_node;
 	platform_set_drvdata(pdev, sp);
 
-	master->use_gpio_descriptors = true;
-	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
-	master->flags = SPI_MASTER_GPIO_SS;
-	master->num_chipselect = 3;
-	master->mem_ops = &ath79_mem_ops;
+	host->use_gpio_descriptors = true;
+	host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
+	host->flags = SPI_MASTER_GPIO_SS;
+	host->num_chipselect = 3;
+	host->mem_ops = &ath79_mem_ops;
 
-	sp->bitbang.master = master;
+	sp->bitbang.master = host;
 	sp->bitbang.chipselect = ath79_spi_chipselect;
 	sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0;
 	sp->bitbang.flags = SPI_CS_HIGH;
@@ -197,18 +197,18 @@ static int ath79_spi_probe(struct platform_device *pdev)
 	sp->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(sp->base)) {
 		ret = PTR_ERR(sp->base);
-		goto err_put_master;
+		goto err_put_host;
 	}
 
 	sp->clk = devm_clk_get(&pdev->dev, "ahb");
 	if (IS_ERR(sp->clk)) {
 		ret = PTR_ERR(sp->clk);
-		goto err_put_master;
+		goto err_put_host;
 	}
 
 	ret = clk_prepare_enable(sp->clk);
 	if (ret)
-		goto err_put_master;
+		goto err_put_host;
 
 	rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
 	if (!rate) {
@@ -231,8 +231,8 @@ static int ath79_spi_probe(struct platform_device *pdev)
 	ath79_spi_disable(sp);
 err_clk_disable:
 	clk_disable_unprepare(sp->clk);
-err_put_master:
-	spi_master_put(sp->bitbang.master);
+err_put_host:
+	spi_controller_put(host);
 
 	return ret;
 }
@@ -244,7 +244,7 @@ static int ath79_spi_remove(struct platform_device *pdev)
 	spi_bitbang_stop(&sp->bitbang);
 	ath79_spi_disable(sp);
 	clk_disable_unprepare(sp->clk);
-	spi_master_put(sp->bitbang.master);
+	spi_controller_put(sp->bitbang.master);
 
 	return 0;
 }

drivers/spi/spi-cadence-quadspi.c

@@ -84,6 +84,7 @@ struct cqspi_st {
 	u32			trigger_address;
 	u32			wr_delay;
 	bool			use_direct_mode;
+	bool			use_direct_mode_wr;
 	struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT];
 	bool			use_dma_read;
 	u32			pd_dev_id;
@@ -531,6 +532,17 @@ static int cqspi_command_read(struct cqspi_flash_pdata *f_pdata,
 	/* 0 means 1 byte. */
 	reg |= (((n_rx - 1) & CQSPI_REG_CMDCTRL_RD_BYTES_MASK)
 		<< CQSPI_REG_CMDCTRL_RD_BYTES_LSB);
+
+	/* setup ADDR BIT field */
+	if (op->addr.nbytes) {
+		reg |= (0x1 << CQSPI_REG_CMDCTRL_ADDR_EN_LSB);
+		reg |= ((op->addr.nbytes - 1) &
+			CQSPI_REG_CMDCTRL_ADD_BYTES_MASK)
+			<< CQSPI_REG_CMDCTRL_ADD_BYTES_LSB;
+
+		writel(op->addr.val, reg_base + CQSPI_REG_CMDADDRESS);
+	}
+
 	status = cqspi_exec_flash_cmd(cqspi, reg);
 	if (status)
 		return status;
@@ -549,6 +561,9 @@ static int cqspi_command_read(struct cqspi_flash_pdata *f_pdata,
 		memcpy(rxbuf, &reg, read_len);
 	}
 
+	/* Reset CMD_CTRL Reg once command read completes */
+	writel(0, reg_base + CQSPI_REG_CMDCTRL);
+
 	return 0;
 }
 
@@ -613,7 +628,12 @@ static int cqspi_command_write(struct cqspi_flash_pdata *f_pdata,
 		}
 	}
 
-	return cqspi_exec_flash_cmd(cqspi, reg);
+	ret = cqspi_exec_flash_cmd(cqspi, reg);
+
+	/* Reset CMD_CTRL Reg once command write completes */
+	writel(0, reg_base + CQSPI_REG_CMDCTRL);
+
+	return ret;
 }
 
 static int cqspi_read_setup(struct cqspi_flash_pdata *f_pdata,
@@ -937,6 +957,12 @@ static int cqspi_write_setup(struct cqspi_flash_pdata *f_pdata,
 		reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
 		reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL;
 		writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+		/*
+		 * DAC mode require auto polling as flash needs to be polled
+		 * for write completion in case of bubble in SPI transaction
+		 * due to slow CPU/DMA master.
+		 */
+		cqspi->use_direct_mode_wr = false;
 	}
 
 	reg = readl(reg_base + CQSPI_REG_SIZE);
@@ -1222,7 +1248,7 @@ static ssize_t cqspi_write(struct cqspi_flash_pdata *f_pdata,
 	 * data.
 	 */
 	if (!op->cmd.dtr && cqspi->use_direct_mode &&
-	    ((to + len) <= cqspi->ahb_size)) {
+	    cqspi->use_direct_mode_wr && ((to + len) <= cqspi->ahb_size)) {
 		memcpy_toio(cqspi->ahb_base + to, buf, len);
 		return cqspi_wait_idle(cqspi);
 	}
@@ -1333,7 +1359,13 @@ static int cqspi_mem_process(struct spi_mem *mem, const struct spi_mem_op *op)
 	cqspi_configure(f_pdata, mem->spi->max_speed_hz);
 
 	if (op->data.dir == SPI_MEM_DATA_IN && op->data.buf.in) {
-		if (!op->addr.nbytes)
+	/*
+	 * Performing reads in DAC mode forces to read minimum 4 bytes
+	 * which is unsupported on some flash devices during register
+	 * reads, prefer STIG mode for such small reads.
+	 */
+		if (!op->addr.nbytes ||
+		    op->data.nbytes <= CQSPI_STIG_DATA_LEN_MAX)
 			return cqspi_command_read(f_pdata, op);
 
 		return cqspi_read(f_pdata, op);
@@ -1692,8 +1724,10 @@ static int cqspi_probe(struct platform_device *pdev)
 						cqspi->master_ref_clk_hz);
 		if (ddata->hwcaps_mask & CQSPI_SUPPORTS_OCTAL)
 			master->mode_bits |= SPI_RX_OCTAL | SPI_TX_OCTAL;
-		if (!(ddata->quirks & CQSPI_DISABLE_DAC_MODE))
+		if (!(ddata->quirks & CQSPI_DISABLE_DAC_MODE)) {
 			cqspi->use_direct_mode = true;
+			cqspi->use_direct_mode_wr = true;
+		}
 		if (ddata->quirks & CQSPI_SUPPORT_EXTERNAL_DMA)
 			cqspi->use_dma_read = true;
 		if (ddata->quirks & CQSPI_NO_SUPPORT_WR_COMPLETION)

drivers/spi/spi-intel-pci.c

@@ -60,12 +60,12 @@ static int intel_spi_pci_probe(struct pci_dev *pdev,
 }
 
 static const struct pci_device_id intel_spi_pci_ids[] = {
-	{ PCI_VDEVICE(INTEL, 0x02a4), (unsigned long)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0x06a4), (unsigned long)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0x02a4), (unsigned long)&cnl_info },
+	{ PCI_VDEVICE(INTEL, 0x06a4), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0x18e0), (unsigned long)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0x1bca), (unsigned long)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0x34a4), (unsigned long)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0x34a4), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0x38a4), (unsigned long)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0x43a4), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0x4b24), (unsigned long)&bxt_info },
@@ -75,11 +75,14 @@ static const struct pci_device_id intel_spi_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x7a24), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0x7aa4), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0x7e23), (unsigned long)&cnl_info },
-	{ PCI_VDEVICE(INTEL, 0xa0a4), (unsigned long)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0x9d24), (unsigned long)&cnl_info },
+	{ PCI_VDEVICE(INTEL, 0x9da4), (unsigned long)&cnl_info },
+	{ PCI_VDEVICE(INTEL, 0xa0a4), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0xa2a4), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0xa324), (unsigned long)&cnl_info },
-	{ PCI_VDEVICE(INTEL, 0xa3a4), (unsigned long)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0xa3a4), (unsigned long)&cnl_info },
 	{ },
 };
 MODULE_DEVICE_TABLE(pci, intel_spi_pci_ids);

drivers/spi/spi-intel.c

@@ -104,7 +104,7 @@
 #define BXT_PR				0x84
 #define BXT_SSFSTS_CTL			0xa0
 #define BXT_FREG_NUM			12
-#define BXT_PR_NUM			6
+#define BXT_PR_NUM			5
 
 #define CNL_PR				0x84
 #define CNL_FREG_NUM			6

drivers/spi/spi-loopback-test.c

@@ -71,6 +71,11 @@ module_param(check_ranges, int, 0644);
 MODULE_PARM_DESC(check_ranges,
 		 "checks rx_buffer pattern are valid");
 
+static unsigned int delay_ms = 100;
+module_param(delay_ms, uint, 0644);
+MODULE_PARM_DESC(delay_ms,
+		 "delay between tests, in milliseconds (default: 100)");
+
 /* the actual tests to execute */
 static struct spi_test spi_tests[] = {
 	{
@@ -1098,7 +1103,8 @@ int spi_test_run_tests(struct spi_device *spi,
 		 * detect the individual tests when using a logic analyzer
 		 * we also add scheduling to avoid potential spi_timeouts...
 		 */
-		mdelay(100);
+		if (delay_ms)
+			mdelay(delay_ms);
 		schedule();
 	}
 

drivers/spi/spi-mem.c

@@ -325,7 +325,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 	if (!spi_mem_internal_supports_op(mem, op))
 		return -ENOTSUPP;
 
-	if (ctlr->mem_ops && !mem->spi->cs_gpiod) {
+	if (ctlr->mem_ops && ctlr->mem_ops->exec_op && !mem->spi->cs_gpiod) {
 		ret = spi_mem_access_start(mem);
 		if (ret)
 			return ret;

drivers/spi/spi-mtk-snfi.c

@@ -195,6 +195,8 @@
 #define DATA_READ_MODE_X4 2
 #define DATA_READ_MODE_DUAL 5
 #define DATA_READ_MODE_QUAD 6
+#define DATA_READ_LATCH_LAT GENMASK(9, 8)
+#define DATA_READ_LATCH_LAT_S 8
 #define PG_LOAD_CUSTOM_EN BIT(7)
 #define DATARD_CUSTOM_EN BIT(6)
 #define CS_DESELECT_CYC_S 0
@@ -205,6 +207,9 @@
 
 #define SNF_DLY_CTL3 0x548
 #define SFCK_SAM_DLY_S 0
+#define SFCK_SAM_DLY GENMASK(5, 0)
+#define SFCK_SAM_DLY_TOTAL 9
+#define SFCK_SAM_DLY_RANGE 47
 
 #define SNF_STA_CTL1 0x550
 #define CUS_PG_DONE BIT(28)
@@ -297,6 +302,7 @@ struct mtk_snand {
 	struct device *dev;
 	struct clk *nfi_clk;
 	struct clk *pad_clk;
+	struct clk *nfi_hclk;
 	void __iomem *nfi_base;
 	int irq;
 	struct completion op_done;
@@ -1339,7 +1345,16 @@ static int mtk_snand_enable_clk(struct mtk_snand *ms)
 		dev_err(ms->dev, "unable to enable pad clk\n");
 		goto err1;
 	}
+	ret = clk_prepare_enable(ms->nfi_hclk);
+	if (ret) {
+		dev_err(ms->dev, "unable to enable nfi hclk\n");
+		goto err2;
+	}
+
 	return 0;
+
+err2:
+	clk_disable_unprepare(ms->pad_clk);
 err1:
 	clk_disable_unprepare(ms->nfi_clk);
 	return ret;
@@ -1347,6 +1362,7 @@ static int mtk_snand_enable_clk(struct mtk_snand *ms)
 
 static void mtk_snand_disable_clk(struct mtk_snand *ms)
 {
+	clk_disable_unprepare(ms->nfi_hclk);
 	clk_disable_unprepare(ms->pad_clk);
 	clk_disable_unprepare(ms->nfi_clk);
 }
@@ -1357,6 +1373,8 @@ static int mtk_snand_probe(struct platform_device *pdev)
 	const struct of_device_id *dev_id;
 	struct spi_controller *ctlr;
 	struct mtk_snand *ms;
+	unsigned long spi_freq;
+	u32 val = 0;
 	int ret;
 
 	dev_id = of_match_node(mtk_snand_ids, np);
@@ -1401,6 +1419,13 @@ static int mtk_snand_probe(struct platform_device *pdev)
 		goto release_ecc;
 	}
 
+	ms->nfi_hclk = devm_clk_get_optional(&pdev->dev, "nfi_hclk");
+	if (IS_ERR(ms->nfi_hclk)) {
+		ret = PTR_ERR(ms->nfi_hclk);
+		dev_err(&pdev->dev, "unable to get nfi_hclk, err = %d\n", ret);
+		goto release_ecc;
+	}
+
 	ret = mtk_snand_enable_clk(ms);
 	if (ret)
 		goto release_ecc;
@@ -1428,10 +1453,22 @@ static int mtk_snand_probe(struct platform_device *pdev)
 	// switch to SNFI mode
 	nfi_write32(ms, SNF_CFG, SPI_MODE);
 
+	ret = of_property_read_u32(np, "rx-sample-delay-ns", &val);
+	if (!ret)
+		nfi_rmw32(ms, SNF_DLY_CTL3, SFCK_SAM_DLY,
+			  val * SFCK_SAM_DLY_RANGE / SFCK_SAM_DLY_TOTAL);
+
+	ret = of_property_read_u32(np, "mediatek,rx-latch-latency-ns", &val);
+	if (!ret) {
+		spi_freq = clk_get_rate(ms->pad_clk);
+		val = DIV_ROUND_CLOSEST(val, NSEC_PER_SEC / spi_freq);
+		nfi_rmw32(ms, SNF_MISC_CTL, DATA_READ_LATCH_LAT,
+			  val << DATA_READ_LATCH_LAT_S);
+	}
+
 	// setup an initial page format for ops matching page_cache_op template
 	// before ECC is called.
-	ret = mtk_snand_setup_pagefmt(ms, ms->caps->sector_size,
-				      ms->caps->spare_sizes[0]);
+	ret = mtk_snand_setup_pagefmt(ms, SZ_2K, SZ_64);
 	if (ret) {
 		dev_err(ms->dev, "failed to set initial page format\n");
 		goto disable_clk;

drivers/spi/spi-pl022.c

@@ -2091,7 +2091,6 @@ pl022_platform_data_dt_get(struct device *dev)
 		return NULL;
 
 	pd->bus_id = -1;
-	pd->enable_dma = 1;
 	of_property_read_u32(np, "pl022,autosuspend-delay",
 			     &pd->autosuspend_delay);
 	pd->rt = of_property_read_bool(np, "pl022,rt");

drivers/spi/spi-synquacer.c

@@ -472,10 +472,9 @@ static int synquacer_spi_transfer_one(struct spi_master *master,
 		read_fifo(sspi);
 	}
 
-	if (status < 0) {
-		dev_err(sspi->dev, "failed to transfer. status: 0x%x\n",
-			status);
-		return status;
+	if (status == 0) {
+		dev_err(sspi->dev, "failed to transfer. Timeout.\n");
+		return -ETIMEDOUT;
 	}
 
 	return 0;

drivers/spi/spi-xilinx.c

@@ -83,7 +83,7 @@ struct xilinx_spi {
 	void __iomem	*regs;	/* virt. address of the control registers */
 
 	int		irq;
-
+	bool force_irq;		/* force irq to setup master inhibit */
 	u8 *rx_ptr;		/* pointer in the Tx buffer */
 	const u8 *tx_ptr;	/* pointer in the Rx buffer */
 	u8 bytes_per_word;
@@ -248,7 +248,8 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 	xspi->rx_ptr = t->rx_buf;
 	remaining_words = t->len / xspi->bytes_per_word;
 
-	if (xspi->irq >= 0 &&  remaining_words > xspi->buffer_size) {
+	if (xspi->irq >= 0 &&
+	    (xspi->force_irq || remaining_words > xspi->buffer_size)) {
 		u32 isr;
 		use_irq = true;
 		/* Inhibit irq to avoid spurious irqs on tx_empty*/
@@ -393,6 +394,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret, num_cs = 0, bits_per_word;
 	struct spi_master *master;
+	bool force_irq = false;
 	u32 tmp;
 	u8 i;
 
@@ -400,6 +402,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
 	if (pdata) {
 		num_cs = pdata->num_chipselect;
 		bits_per_word = pdata->bits_per_word;
+		force_irq = pdata->force_irq;
 	} else {
 		of_property_read_u32(pdev->dev.of_node, "xlnx,num-ss-bits",
 					  &num_cs);
@@ -477,6 +480,8 @@ static int xilinx_spi_probe(struct platform_device *pdev)
 				dev_name(&pdev->dev), xspi);
 		if (ret)
 			return ret;
+
+		xspi->force_irq = force_irq;
 	}
 
 	/* SPI controller initializations */

drivers/spi/spidev.c

@@ -115,8 +115,6 @@ spidev_sync(struct spidev_data *spidev, struct spi_message *message)
 	else
 		status = spidev_sync_unlocked(spi, message);
 
-	mutex_unlock(&spidev->spi_lock);
-
 	mutex_unlock(&spidev->spi_lock);
 	return status;
 }
@@ -713,6 +711,8 @@ static const struct spi_device_id spidev_spi_ids[] = {
 	{ .name = "m53cpld" },
 	{ .name = "spi-petra" },
 	{ .name = "spi-authenta" },
+	{ .name = "em3581" },
+	{ .name = "si3210" },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, spidev_spi_ids);
@@ -731,14 +731,16 @@ static int spidev_of_check(struct device *dev)
 }
 
 static const struct of_device_id spidev_dt_ids[] = {
-	{ .compatible = "rohm,dh2228fv", .data = &spidev_of_check },
+	{ .compatible = "cisco,spi-petra", .data = &spidev_of_check },
+	{ .compatible = "dh,dhcom-board", .data = &spidev_of_check },
 	{ .compatible = "lineartechnology,ltc2488", .data = &spidev_of_check },
-	{ .compatible = "semtech,sx1301", .data = &spidev_of_check },
 	{ .compatible = "lwn,bk4", .data = &spidev_of_check },
-	{ .compatible = "dh,dhcom-board", .data = &spidev_of_check },
 	{ .compatible = "menlo,m53cpld", .data = &spidev_of_check },
-	{ .compatible = "cisco,spi-petra", .data = &spidev_of_check },
 	{ .compatible = "micron,spi-authenta", .data = &spidev_of_check },
+	{ .compatible = "rohm,dh2228fv", .data = &spidev_of_check },
+	{ .compatible = "semtech,sx1301", .data = &spidev_of_check },
+	{ .compatible = "silabs,em3581", .data = &spidev_of_check },
+	{ .compatible = "silabs,si3210", .data = &spidev_of_check },
 	{},
 };
 MODULE_DEVICE_TABLE(of, spidev_dt_ids);

include/linux/spi/altera.h

@@ -14,7 +14,7 @@
 
 /**
  * struct altera_spi_platform_data - Platform data of the Altera SPI driver
- * @mode_bits:		Mode bits of SPI master.
+ * @mode_bits:		Mode bits of SPI host.
  * @num_chipselect:	Number of chipselects.
  * @bits_per_word_mask:	bitmask of supported bits_per_word for transfers.
  * @num_devices:	Number of devices that shall be added when the driver
@@ -46,5 +46,5 @@ struct altera_spi {
 };
 
 extern irqreturn_t altera_spi_irq(int irq, void *dev);
-extern void altera_spi_init_master(struct spi_master *master);
+extern void altera_spi_init_host(struct spi_controller *host);
 #endif /* __LINUX_SPI_ALTERA_H */

include/linux/spi/spi.h

@@ -26,6 +26,7 @@ struct spi_controller;
 struct spi_transfer;
 struct spi_controller_mem_ops;
 struct spi_controller_mem_caps;
+struct spi_message;
 
 /*
  * INTERFACES between SPI master-side drivers and SPI slave protocol handlers,
@@ -119,6 +120,8 @@ struct spi_delay {
 
 extern int spi_delay_to_ns(struct spi_delay *_delay, struct spi_transfer *xfer);
 extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer);
+extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg,
+						  struct spi_transfer *xfer);
 
 /**
  * struct spi_device - Controller side proxy for an SPI slave device
@@ -263,7 +266,25 @@ static inline void *spi_get_drvdata(struct spi_device *spi)
 	return dev_get_drvdata(&spi->dev);
 }
 
-struct spi_message;
+static inline u8 spi_get_chipselect(struct spi_device *spi, u8 idx)
+{
+	return spi->chip_select;
+}
+
+static inline void spi_set_chipselect(struct spi_device *spi, u8 idx, u8 chipselect)
+{
+	spi->chip_select = chipselect;
+}
+
+static inline struct gpio_desc *spi_get_csgpiod(struct spi_device *spi, u8 idx)
+{
+	return spi->cs_gpiod;
+}
+
+static inline void spi_set_csgpiod(struct spi_device *spi, u8 idx, struct gpio_desc *csgpiod)
+{
+	spi->cs_gpiod = csgpiod;
+}
 
 /**
  * struct spi_driver - Host side "protocol" driver
@@ -1001,6 +1022,9 @@ struct spi_transfer {
 	void		*rx_buf;
 	unsigned	len;
 
+#define SPI_TRANS_FAIL_NO_START	BIT(0)
+	u16		error;
+
 	dma_addr_t	tx_dma;
 	dma_addr_t	rx_dma;
 	struct sg_table tx_sg;
@@ -1011,6 +1035,7 @@ struct spi_transfer {
 	unsigned	cs_change:1;
 	unsigned	tx_nbits:3;
 	unsigned	rx_nbits:3;
+	unsigned	timestamped:1;
 #define	SPI_NBITS_SINGLE	0x01 /* 1bit transfer */
 #define	SPI_NBITS_DUAL		0x02 /* 2bits transfer */
 #define	SPI_NBITS_QUAD		0x04 /* 4bits transfer */
@@ -1027,12 +1052,7 @@ struct spi_transfer {
 
 	struct ptp_system_timestamp *ptp_sts;
 
-	bool		timestamped;
-
 	struct list_head transfer_list;
-
-#define SPI_TRANS_FAIL_NO_START	BIT(0)
-	u16		error;
 };
 
 /**

include/linux/spi/xilinx_spi.h

@@ -15,6 +15,7 @@ struct xspi_platform_data {
 	u8 bits_per_word;
 	struct spi_board_info *devices;
 	u8 num_devices;
+	bool force_irq;
 };
 
 #endif /* __LINUX_SPI_XILINX_SPI_H */