arm: Move chained_irq_(enter|exit) to a generic file

These functions have been introduced by commit 10a8c383 (irq: introduce
entry and exit functions for chained handlers) in asm/mach/irq.h. This
patch moves them to linux/irqchip/chained_irq.h so that generic irqchip
drivers do not rely on architecture specific header files.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>

arch/arm/include/asm/mach/irq.h

@@ -30,35 +30,4 @@ do {							\
 	raw_spin_unlock(&desc->lock);			\
 } while(0)
 
-#ifndef __ASSEMBLY__
-/*
- * Entry/exit functions for chained handlers where the primary IRQ chip
- * may implement either fasteoi or level-trigger flow control.
- */
-static inline void chained_irq_enter(struct irq_chip *chip,
-				     struct irq_desc *desc)
-{
-	/* FastEOI controllers require no action on entry. */
-	if (chip->irq_eoi)
-		return;
-
-	if (chip->irq_mask_ack) {
-		chip->irq_mask_ack(&desc->irq_data);
-	} else {
-		chip->irq_mask(&desc->irq_data);
-		if (chip->irq_ack)
-			chip->irq_ack(&desc->irq_data);
-	}
-}
-
-static inline void chained_irq_exit(struct irq_chip *chip,
-				    struct irq_desc *desc)
-{
-	if (chip->irq_eoi)
-		chip->irq_eoi(&desc->irq_data);
-	else
-		chip->irq_unmask(&desc->irq_data);
-}
-#endif
-
 #endif

arch/arm/mach-at91/gpio.c

@@ -22,10 +22,9 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/of_address.h>
 
-#include <asm/mach/irq.h>
-
 #include <mach/hardware.h>
 #include <mach/at91_pio.h>
 

arch/arm/mach-exynos/common.c

@@ -26,6 +26,7 @@
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
 #include <linux/irqchip/arm-gic.h>
+#include <linux/irqchip/chained_irq.h>
 
 #include <asm/proc-fns.h>
 #include <asm/exception.h>

arch/arm/mach-s3c24xx/irq.c

@@ -25,6 +25,7 @@
 #include <linux/ioport.h>
 #include <linux/device.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 
 #include <asm/mach/irq.h>
 

arch/arm/plat-samsung/irq-vic-timer.c

@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/io.h>
 
 #include <mach/map.h>
@@ -23,8 +24,6 @@
 #include <plat/irq-vic-timer.h>
 #include <plat/regs-timer.h>
 
-#include <asm/mach/irq.h>
-
 static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
 {
 	struct irq_chip *chip = irq_get_chip(irq);

arch/arm/plat-samsung/s5p-irq-gpioint.c

@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
@@ -22,8 +23,6 @@
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 
-#include <asm/mach/irq.h>
-
 #define GPIO_BASE(chip)		((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u))
 
 #define CON_OFFSET		0x700

drivers/gpio/gpio-msm-v2.c

@@ -23,13 +23,12 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 
-#include <asm/mach/irq.h>
-
 #include <mach/msm_gpiomux.h>
 #include <mach/msm_iomap.h>
 

drivers/gpio/gpio-mxc.c

@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -32,7 +33,6 @@
 #include <linux/of_device.h>
 #include <linux/module.h>
 #include <asm-generic/bug.h>
-#include <asm/mach/irq.h>
 
 enum mxc_gpio_hwtype {
 	IMX1_GPIO,	/* runs on i.mx1 */

drivers/gpio/gpio-omap.c

@@ -25,11 +25,10 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 
-#include <asm/mach/irq.h>
-
 #define OFF_MODE	1
 
 static LIST_HEAD(omap_gpio_list);

drivers/gpio/gpio-pl061.c

@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/bitops.h>
 #include <linux/workqueue.h>
 #include <linux/gpio.h>
@@ -23,7 +24,6 @@
 #include <linux/amba/pl061.h>
 #include <linux/slab.h>
 #include <linux/pm.h>
-#include <asm/mach/irq.h>
 
 #define GPIODIR 0x400
 #define GPIOIS  0x404

drivers/gpio/gpio-pxa.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -26,8 +27,6 @@
 #include <linux/syscore_ops.h>
 #include <linux/slab.h>
 
-#include <asm/mach/irq.h>
-
 #include <mach/irqs.h>
 
 /*

drivers/gpio/gpio-tegra.c

@@ -27,11 +27,10 @@
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm.h>
 
-#include <asm/mach/irq.h>
-
 #define GPIO_BANK(x)		((x) >> 5)
 #define GPIO_PORT(x)		(((x) >> 3) & 0x3)
 #define GPIO_BIT(x)		((x) & 0x7)

drivers/irqchip/exynos-combiner.c

@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <asm/mach/irq.h>

drivers/irqchip/irq-gic.c

@@ -38,6 +38,7 @@
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
 #include <linux/slab.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/irqchip/arm-gic.h>
 
 #include <asm/irq.h>

drivers/pinctrl/pinctrl-at91.c

@@ -18,6 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/pinctrl/machine.h>
@@ -27,8 +28,6 @@
 /* Since we request GPIOs from ourself */
 #include <linux/pinctrl/consumer.h>
 
-#include <asm/mach/irq.h>
-
 #include <mach/hardware.h>
 #include <mach/at91_pio.h>
 

drivers/pinctrl/pinctrl-exynos.c

@@ -23,13 +23,12 @@
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
 #include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/of_irq.h>
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 
-#include <asm/mach/irq.h>
-
 #include "pinctrl-samsung.h"
 #include "pinctrl-exynos.h"
 

drivers/pinctrl/pinctrl-nomadik.c

@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/slab.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
@@ -33,7 +34,6 @@
 /* Since we request GPIOs from ourself */
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
-#include <asm/mach/irq.h>
 #include "pinctrl-nomadik.h"
 #include "core.h"
 

drivers/pinctrl/pinctrl-sirf.c

@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
 #include <linux/pinctrl/consumer.h>
@@ -25,7 +26,6 @@
 #include <linux/bitops.h>
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
-#include <asm/mach/irq.h>
 
 #define DRIVER_NAME "pinmux-sirf"
 

drivers/pinctrl/spear/pinctrl-plgpio.c

@@ -15,12 +15,12 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/module.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/spinlock.h>
-#include <asm/mach/irq.h>
 
 #define MAX_GPIO_PER_REG		32
 #define PIN_OFFSET(pin)			(pin % MAX_GPIO_PER_REG)

drivers/staging/imx-drm/ipu-v3/ipu-common.c

@@ -25,8 +25,8 @@
 #include <linux/clk.h>
 #include <linux/list.h>
 #include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/of_device.h>
-#include <asm/mach/irq.h>
 
 #include "imx-ipu-v3.h"
 #include "ipu-prv.h"

include/linux/irqchip/chained_irq.h

+/*
+ * Chained IRQ handlers support.
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __IRQCHIP_CHAINED_IRQ_H
+#define __IRQCHIP_CHAINED_IRQ_H
+
+#include <linux/irq.h>
+
+/*
+ * Entry/exit functions for chained handlers where the primary IRQ chip
+ * may implement either fasteoi or level-trigger flow control.
+ */
+static inline void chained_irq_enter(struct irq_chip *chip,
+				     struct irq_desc *desc)
+{
+	/* FastEOI controllers require no action on entry. */
+	if (chip->irq_eoi)
+		return;
+
+	if (chip->irq_mask_ack) {
+		chip->irq_mask_ack(&desc->irq_data);
+	} else {
+		chip->irq_mask(&desc->irq_data);
+		if (chip->irq_ack)
+			chip->irq_ack(&desc->irq_data);
+	}
+}
+
+static inline void chained_irq_exit(struct irq_chip *chip,
+				    struct irq_desc *desc)
+{
+	if (chip->irq_eoi)
+		chip->irq_eoi(&desc->irq_data);
+	else
+		chip->irq_unmask(&desc->irq_data);
+}
+
+#endif /* __IRQCHIP_CHAINED_IRQ_H */