Commit defa6be1 authored by Tony Lindgren's avatar Tony Lindgren

mfd: Fix compile for twl-core.c by removing cpu_is_omap usage

Commit 7d7e1eba (ARM: OMAP2+: Prepare for irqs.h removal) broke
compile for non-omap as include plat/cpu.h was added. This header
was indirectly included earlier when SPARSE_IRQ was not set, but
does not exist on most platforms.

Fix the problem by removing the cpu_is_omap usage that should
not exist in drivers at all. We can do this by adding proper
clock aliases for the twl-core.c drivers, and drop separate
handling for cases when clock framework is not available as
the behaviour will stay the same.

Note that we need to add a platform device to avoid using the
i2c provided names that may be different on various omaps.
Reported-by: default avatarFengguang Wu <fengguang.wu@intel.com>
Reported-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 68cb700c
......@@ -1856,6 +1856,7 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X),
CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X),
CLK(NULL, "osc_ck", &osc_ck, CK_243X),
CLK("twl", "fck", &osc_ck, CK_243X),
CLK(NULL, "sys_ck", &sys_ck, CK_243X),
CLK(NULL, "alt_ck", &alt_ck, CK_243X),
CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X),
......
......@@ -3226,6 +3226,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_3XXX),
CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX),
CLK("twl", "fck", &osc_sys_ck, CK_3XXX),
CLK(NULL, "sys_ck", &sys_ck, CK_3XXX),
CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX),
CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX),
......
......@@ -46,8 +46,6 @@
#include <linux/i2c.h>
#include <linux/i2c/twl.h>
#include <plat/cpu.h>
#include "twl-core.h"
/*
......@@ -1134,12 +1132,7 @@ static void clocks_init(struct device *dev,
u32 rate;
u8 ctrl = HFCLK_FREQ_26_MHZ;
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
if (cpu_is_omap2430())
osc = clk_get(dev, "osc_ck");
else
osc = clk_get(dev, "osc_sys_ck");
osc = clk_get(dev, "fck");
if (IS_ERR(osc)) {
printk(KERN_WARNING "Skipping twl internal clock init and "
"using bootloader value (unknown osc rate)\n");
......@@ -1149,18 +1142,6 @@ static void clocks_init(struct device *dev,
rate = clk_get_rate(osc);
clk_put(osc);
#else
/* REVISIT for non-OMAP systems, pass the clock rate from
* board init code, using platform_data.
*/
osc = ERR_PTR(-EIO);
printk(KERN_WARNING "Skipping twl internal clock init and "
"using bootloader value (unknown osc rate)\n");
return;
#endif
switch (rate) {
case 19200000:
ctrl = HFCLK_FREQ_19p2_MHZ;
......@@ -1222,10 +1203,23 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct twl4030_platform_data *pdata = client->dev.platform_data;
struct device_node *node = client->dev.of_node;
struct platform_device *pdev;
int irq_base = 0;
int status;
unsigned i, num_slaves;
pdev = platform_device_alloc(DRIVER_NAME, -1);
if (!pdev) {
dev_err(&client->dev, "can't alloc pdev\n");
return -ENOMEM;
}
status = platform_device_add(pdev);
if (status) {
platform_device_put(pdev);
return status;
}
if (node && !pdata) {
/*
* XXX: Temporary pdata until the information is correctly
......@@ -1234,23 +1228,30 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
pdata = devm_kzalloc(&client->dev,
sizeof(struct twl4030_platform_data),
GFP_KERNEL);
if (!pdata)
return -ENOMEM;
if (!pdata) {
status = -ENOMEM;
goto free;
}
}
if (!pdata) {
dev_dbg(&client->dev, "no platform data?\n");
return -EINVAL;
status = -EINVAL;
goto free;
}
platform_set_drvdata(pdev, pdata);
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
dev_dbg(&client->dev, "can't talk I2C?\n");
return -EIO;
status = -EIO;
goto free;
}
if (inuse) {
dev_dbg(&client->dev, "driver is already in use\n");
return -EBUSY;
status = -EBUSY;
goto free;
}
if ((id->driver_data) & TWL6030_CLASS) {
......@@ -1285,7 +1286,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
inuse = true;
/* setup clock framework */
clocks_init(&client->dev, pdata->clock);
clocks_init(&pdev->dev, pdata->clock);
/* read TWL IDCODE Register */
if (twl_id == TWL4030_CLASS_ID) {
......@@ -1335,6 +1336,9 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
fail:
if (status < 0)
twl_remove(client);
free:
if (status < 0)
platform_device_unregister(pdev);
return status;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment