iio: accel: add ADXL380 driver

The ADXL380/ADXL382 is a low noise density, low power, 3-axis
accelerometer with selectable measurement ranges. The ADXL380 supports
the +/-4 g, +/-8 g, and +/-16 g ranges, and the ADXL382 supports
+/-15 g, +/-30 g and +/-60 g ranges.
The ADXL380/ADXL382 offers industry leading noise, enabling precision
applications with minimal calibration. The low noise, and low power
ADXL380/ADXL382 enables accurate measurement in an environment with
high vibration, heart sounds and audio.

In addition to its low power consumption, the ADXL380/ADXL382 has many
features to enable true system level performance. These include a
built-in micropower temperature sensor, single / double / triple tap
detection and a state machine to prevent a false triggering. In
addition, the ADXL380/ADXL382 has provisions for external control of
the sampling time and/or an external clock.
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20240708104114.29894-2-antoniu.miclaus@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS

@@ -625,6 +625,10 @@ M:	Antoniu Miclaus <antoniu.miclaus@analog.com>
 S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml
+F:	drivers/iio/accel/adxl380.c
+F:	drivers/iio/accel/adxl380.h
+F:	drivers/iio/accel/adxl380_i2c.c
+F:	drivers/iio/accel/adxl380_spi.c
 
 AF8133J THREE-AXIS MAGNETOMETER DRIVER
 M:	Ondřej Jirman <megi@xff.cz>

drivers/iio/accel/Kconfig

@@ -177,6 +177,33 @@ config ADXL372_I2C
 	  To compile this driver as a module, choose M here: the
 	  module will be called adxl372_i2c.
 
+config ADXL380
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+config ADXL380_SPI
+	tristate "Analog Devices ADXL380 3-Axis Accelerometer SPI Driver"
+	depends on SPI
+	select ADXL380
+	select REGMAP_SPI
+	help
+	  Say yes here to add support for the Analog Devices ADXL380 triaxial
+	  acceleration sensor.
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl380_spi.
+
+config ADXL380_I2C
+	tristate "Analog Devices ADXL380 3-Axis Accelerometer I2C Driver"
+	depends on I2C
+	select ADXL380
+	select REGMAP_I2C
+	help
+	  Say yes here to add support for the Analog Devices ADXL380 triaxial
+	  acceleration sensor.
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl380_i2c.
+
 config BMA180
 	tristate "Bosch BMA023/BMA1x0/BMA250 3-Axis Accelerometer Driver"
 	depends on I2C && INPUT_BMA150=n

drivers/iio/accel/Makefile

@@ -21,6 +21,9 @@ obj-$(CONFIG_ADXL367_SPI) += adxl367_spi.o
 obj-$(CONFIG_ADXL372) += adxl372.o
 obj-$(CONFIG_ADXL372_I2C) += adxl372_i2c.o
 obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o
+obj-$(CONFIG_ADXL380) += adxl380.o
+obj-$(CONFIG_ADXL380_I2C) += adxl380_i2c.o
+obj-$(CONFIG_ADXL380_SPI) += adxl380_spi.o
 obj-$(CONFIG_BMA180) += bma180.o
 obj-$(CONFIG_BMA220) += bma220_spi.o
 obj-$(CONFIG_BMA400) += bma400_core.o

drivers/iio/accel/adxl380.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * ADXL380 3-Axis Digital Accelerometer
+ *
+ * Copyright 2024 Analog Devices Inc.
+ */
+
+#ifndef _ADXL380_H_
+#define _ADXL380_H_
+
+struct adxl380_chip_info {
+	const char *name;
+	const int scale_tbl[3][2];
+	const int samp_freq_tbl[3];
+	const int temp_offset;
+	const u16 chip_id;
+};
+
+extern const struct adxl380_chip_info adxl380_chip_info;
+extern const struct adxl380_chip_info adxl382_chip_info;
+
+int adxl380_probe(struct device *dev, struct regmap *regmap,
+		  const struct adxl380_chip_info *chip_info);
+bool adxl380_readable_noinc_reg(struct device *dev, unsigned int reg);
+
+#endif /* _ADXL380_H_ */

drivers/iio/accel/adxl380_i2c.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADXL380 3-Axis Digital Accelerometer I2C driver
+ *
+ * Copyright 2024 Analog Devices Inc.
+ */
+
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "adxl380.h"
+
+static const struct regmap_config adxl380_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.readable_noinc_reg = adxl380_readable_noinc_reg,
+};
+
+static int adxl380_i2c_probe(struct i2c_client *client)
+{
+	struct regmap *regmap;
+	const struct adxl380_chip_info *chip_data;
+
+	chip_data = i2c_get_match_data(client);
+
+	regmap = devm_regmap_init_i2c(client, &adxl380_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return adxl380_probe(&client->dev, regmap, chip_data);
+}
+
+static const struct i2c_device_id adxl380_i2c_id[] = {
+	{ "adxl380", (kernel_ulong_t)&adxl380_chip_info },
+	{ "adxl382", (kernel_ulong_t)&adxl382_chip_info },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adxl380_i2c_id);
+
+static const struct of_device_id adxl380_of_match[] = {
+	{ .compatible = "adi,adxl380", .data = &adxl380_chip_info },
+	{ .compatible = "adi,adxl382", .data = &adxl382_chip_info },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adxl380_of_match);
+
+static struct i2c_driver adxl380_i2c_driver = {
+	.driver = {
+		.name = "adxl380_i2c",
+		.of_match_table = adxl380_of_match,
+	},
+	.probe = adxl380_i2c_probe,
+	.id_table = adxl380_i2c_id,
+};
+
+module_i2c_driver(adxl380_i2c_driver);
+
+MODULE_AUTHOR("Ramona Gradinariu <ramona.gradinariu@analog.com>");
+MODULE_AUTHOR("Antoniu Miclaus <antoniu.miclaus@analog.com>");
+MODULE_DESCRIPTION("Analog Devices ADXL380 3-axis accelerometer I2C driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_ADXL380);

drivers/iio/accel/adxl380_spi.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADXL380 3-Axis Digital Accelerometer SPI driver
+ *
+ * Copyright 2024 Analog Devices Inc.
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "adxl380.h"
+
+static const struct regmap_config adxl380_spi_regmap_config = {
+	.reg_bits = 7,
+	.pad_bits = 1,
+	.val_bits = 8,
+	.read_flag_mask = BIT(0),
+	.readable_noinc_reg = adxl380_readable_noinc_reg,
+};
+
+static int adxl380_spi_probe(struct spi_device *spi)
+{
+	const struct adxl380_chip_info *chip_data;
+	struct regmap *regmap;
+
+	chip_data = spi_get_device_match_data(spi);
+
+	regmap = devm_regmap_init_spi(spi, &adxl380_spi_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return adxl380_probe(&spi->dev, regmap, chip_data);
+}
+
+static const struct spi_device_id adxl380_spi_id[] = {
+	{ "adxl380", (kernel_ulong_t)&adxl380_chip_info },
+	{ "adxl382", (kernel_ulong_t)&adxl382_chip_info },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, adxl380_spi_id);
+
+static const struct of_device_id adxl380_of_match[] = {
+	{ .compatible = "adi,adxl380", .data = &adxl380_chip_info },
+	{ .compatible = "adi,adxl382", .data = &adxl382_chip_info },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adxl380_of_match);
+
+static struct spi_driver adxl380_spi_driver = {
+	.driver = {
+		.name = "adxl380_spi",
+		.of_match_table = adxl380_of_match,
+	},
+	.probe = adxl380_spi_probe,
+	.id_table = adxl380_spi_id,
+};
+
+module_spi_driver(adxl380_spi_driver);
+
+MODULE_AUTHOR("Ramona Gradinariu <ramona.gradinariu@analog.com>");
+MODULE_AUTHOR("Antoniu Miclaus <antoniu.miclaus@analog.com>");
+MODULE_DESCRIPTION("Analog Devices ADXL380 3-axis accelerometer SPI driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_ADXL380);