Commit df864c30 authored by Scott Jiang's avatar Scott Jiang Committed by Bob Liu

blackfin: bf548: add capture support

Signed-off-by: default avatarScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: default avatarBob Liu <lliubbo@gmail.com>
parent e6171bbe
......@@ -1183,6 +1183,71 @@ static struct platform_device bf54x_spi_master1 = {
};
#endif /* spi master and devices */
#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_capture.h>
#include <media/blackfin/ppi.h>
static const unsigned short ppi_req[] = {
P_PPI1_D0, P_PPI1_D1, P_PPI1_D2, P_PPI1_D3,
P_PPI1_D4, P_PPI1_D5, P_PPI1_D6, P_PPI1_D7,
P_PPI1_CLK, P_PPI1_FS1, P_PPI1_FS2,
0,
};
static const struct ppi_info ppi_info = {
.type = PPI_TYPE_EPPI,
.dma_ch = CH_EPPI1,
.irq_err = IRQ_EPPI1_ERROR,
.base = (void __iomem *)EPPI1_STATUS,
.pin_req = ppi_req,
};
#if defined(CONFIG_VIDEO_VS6624) \
|| defined(CONFIG_VIDEO_VS6624_MODULE)
static struct v4l2_input vs6624_inputs[] = {
{
.index = 0,
.name = "Camera",
.type = V4L2_INPUT_TYPE_CAMERA,
.std = V4L2_STD_UNKNOWN,
},
};
static struct bcap_route vs6624_routes[] = {
{
.input = 0,
.output = 0,
},
};
static const unsigned vs6624_ce_pin = GPIO_PG6;
static struct bfin_capture_config bfin_capture_data = {
.card_name = "BF548",
.inputs = vs6624_inputs,
.num_inputs = ARRAY_SIZE(vs6624_inputs),
.routes = vs6624_routes,
.i2c_adapter_id = 0,
.board_info = {
.type = "vs6624",
.addr = 0x10,
.platform_data = (void *)&vs6624_ce_pin,
},
.ppi_info = &ppi_info,
.ppi_control = (POLC | PACKEN | DLEN_8 | XFR_TYPE | 0x20),
};
#endif
static struct platform_device bfin_capture_device = {
.name = "bfin_capture",
.dev = {
.platform_data = &bfin_capture_data,
},
};
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
static struct resource bfin_twi0_resource[] = {
[0] = {
......@@ -1506,6 +1571,10 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bf54x_spi_master0,
&bf54x_spi_master1,
#endif
#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
&bfin_capture_device,
#endif
#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
&bf54x_kpad_device,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment