Commit dfa2854c authored by Ioana Ciornei's avatar Ioana Ciornei Committed by Jakub Kicinski

arch: arm64: dts: lx2160a-clearfog-itx: rename the sfp GPIO properties

Rename the 'mod-def0-gpio' property to 'mod-def0-gpios' so that we use
the preferred -gpios suffix. Also, with this change the dtb_check will
not complain when trying to verify the DTS against the sff,sfp.yaml
binding.
Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 7ff7c992
...@@ -34,28 +34,28 @@ key { ...@@ -34,28 +34,28 @@ key {
sfp0: sfp-0 { sfp0: sfp-0 {
compatible = "sff,sfp"; compatible = "sff,sfp";
i2c-bus = <&sfp0_i2c>; i2c-bus = <&sfp0_i2c>;
mod-def0-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>; mod-def0-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <2000>; maximum-power-milliwatt = <2000>;
}; };
sfp1: sfp-1 { sfp1: sfp-1 {
compatible = "sff,sfp"; compatible = "sff,sfp";
i2c-bus = <&sfp1_i2c>; i2c-bus = <&sfp1_i2c>;
mod-def0-gpio = <&gpio2 9 GPIO_ACTIVE_LOW>; mod-def0-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <2000>; maximum-power-milliwatt = <2000>;
}; };
sfp2: sfp-2 { sfp2: sfp-2 {
compatible = "sff,sfp"; compatible = "sff,sfp";
i2c-bus = <&sfp2_i2c>; i2c-bus = <&sfp2_i2c>;
mod-def0-gpio = <&gpio2 10 GPIO_ACTIVE_LOW>; mod-def0-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <2000>; maximum-power-milliwatt = <2000>;
}; };
sfp3: sfp-3 { sfp3: sfp-3 {
compatible = "sff,sfp"; compatible = "sff,sfp";
i2c-bus = <&sfp3_i2c>; i2c-bus = <&sfp3_i2c>;
mod-def0-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; mod-def0-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <2000>; maximum-power-milliwatt = <2000>;
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment