Skip to content

L
linux
Commit dfff569a authored by Ryder Lee's avatar Ryder Lee Committed by Matthias Brugger
Browse files
Options

arm: dts: mt7623: cleanup binding file 

Dummy patch to sort nodes alphabetically and add some blank lines
for consistency.
Signed-off-by: default avatarRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
parent 0eed8d09
Hide whitespace changes
Inline Side-by-side
Showing with 120 additions and 106 deletions
arch/arm/boot/dts/mt7623.dtsi
View file @ dfff569a
......@@ -91,6 +91,7 @@ cpu0: cpu@0 {
cooling-max-level = <7>;
clock-frequency = <1300000000>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
......@@ -98,6 +99,7 @@ cpu1: cpu@1 {
operating-points-v2 = <&cpu_opp_table>;
clock-frequency = <1300000000>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
......@@ -105,6 +107,7 @@ cpu2: cpu@2 {
operating-points-v2 = <&cpu_opp_table>;
clock-frequency = <1300000000>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
......@@ -172,10 +175,12 @@ map0 {
trip = <&cpu_passive>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_active>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map2 {
trip = <&cpu_hot>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
......@@ -481,6 +486,31 @@ thermal: thermal@1100b000 {
nvmem-cell-names = "calibration-data";
};
nandc: nfi@1100d000 {
compatible = "mediatek,mt7623-nfc",
"mediatek,mt2701-nfc";
reg = <0 0x1100d000 0 0x1000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
clocks = <&pericfg CLK_PERI_NFI>,
<&pericfg CLK_PERI_NFI_PAD>;
clock-names = "nfi_clk", "pad_clk";
status = "disabled";
ecc-engine = <&bch>;
#address-cells = <1>;
#size-cells = <0>;
};
bch: ecc@1100e000 {
compatible = "mediatek,mt7623-ecc",
"mediatek,mt2701-ecc";
reg = <0 0x1100e000 0 0x1000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_NFI_ECC>;
clock-names = "nfiecc_clk";
status = "disabled";
};
spi1: spi@11016000 {
compatible = "mediatek,mt7623-spi",
"mediatek,mt2701-spi";
......@@ -509,31 +539,6 @@ spi2: spi@11017000 {
status = "disabled";
};
nandc: nfi@1100d000 {
compatible = "mediatek,mt7623-nfc",
"mediatek,mt2701-nfc";
reg = <0 0x1100d000 0 0x1000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
clocks = <&pericfg CLK_PERI_NFI>,
<&pericfg CLK_PERI_NFI_PAD>;
clock-names = "nfi_clk", "pad_clk";
status = "disabled";
ecc-engine = <&bch>;
#address-cells = <1>;
#size-cells = <0>;
};
bch: ecc@1100e000 {
compatible = "mediatek,mt7623-ecc",
"mediatek,mt2701-ecc";
reg = <0 0x1100e000 0 0x1000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_NFI_ECC>;
clock-names = "nfiecc_clk";
status = "disabled";
};
afe: audio-controller@11220000 {
compatible = "mediatek,mt7623-audio",
"mediatek,mt2701-audio";
......@@ -655,6 +660,15 @@ mmc1: mmc@11240000 {
status = "disabled";
};
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
"syscon";
reg = <0 0x1a000000 0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
usb1: usb@1a1c0000 {
compatible = "mediatek,mt7623-xhci",
"mediatek,mt8173-xhci";
......@@ -733,15 +747,6 @@ u3port1: usb-phy@1a244900 {
};
};
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
"syscon";
reg = <0 0x1a000000 0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
ethsys: syscon@1b000000 {
compatible = "mediatek,mt7623-ethsys",
"mediatek,mt2701-ethsys",
......
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
View file @ dfff569a
......@@ -62,9 +62,9 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&led_pins_a>;
red {
label = "bpi-r2:pio:red";
gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
blue {
label = "bpi-r2:pio:blue";
gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
......@@ -74,9 +74,9 @@ green {
default-state = "off";
};
blue {
label = "bpi-r2:pio:blue";
gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
red {
label = "bpi-r2:pio:red";
gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
......@@ -98,10 +98,12 @@ &crypto {
&eth {
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "trgmii";
fixed-link {
speed = <1000>;
full-duplex;
......@@ -112,12 +114,12 @@ fixed-link {
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
switch@0 {
compatible = "mediatek,mt7530";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
pinctrl-names = "default";
reset-gpios = <&pio 33 0>;
core-supply = <&mt6323_vpa_reg>;
......@@ -127,6 +129,7 @@ ports {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
port@0 {
reg = <0>;
label = "wan";
......@@ -157,6 +160,7 @@ port@6 {
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "trgmii";
fixed-link {
speed = <1000>;
full-duplex;
......@@ -372,16 +376,6 @@ pins_clk {
};
};
spi0_pins_a: spi@0 {
pins_spi {
pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
<MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
<MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
bias-disable;
};
};
pwm_pins_a: pwm@0 {
pins_pwm {
pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
......@@ -392,6 +386,16 @@ pins_pwm {
};
};
spi0_pins_a: spi@0 {
pins_spi {
pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
<MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
<MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
bias-disable;
};
};
uart0_pins_a: uart@0 {
pins_dat {
pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
......@@ -425,11 +429,13 @@ led@0 {
label = "bpi-r2:isink:green";
default-state = "off";
};
led@1 {
reg = <1>;
label = "bpi-r2:isink:red";
default-state = "off";
};
led@2 {
reg = <2>;
label = "bpi-r2:isink:blue";
......@@ -451,14 +457,6 @@ &uart0 {
status = "disabled";
};
&u3phy1 {
status = "okay";
};
&u3phy2 {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_a>;
......@@ -478,3 +476,12 @@ &usb2 {
vusb33-supply = <&mt6323_vusb_reg>;
status = "okay";
};
&u3phy1 {
status = "okay";
};
&u3phy2 {
status = "okay";
};
arch/arm/boot/dts/mt7623n-rfb-nand.dts
View file @ dfff569a
......@@ -20,47 +20,22 @@ / {
compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
};
&pio {
nand_pins_default: nanddefault {
pins_dat {
pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
<MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
<MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
<MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
<MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
<MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
<MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
<MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
<MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
input-enable;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up;
};
pins_we {
pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
};
pins_ale {
pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
};
&bch {
status = "okay";
};
&nandc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nand_pins_default>;
nand@0 {
reg = <0>;
spare_per_sector = <64>;
nand-ecc-mode = "hw";
nand-ecc-strength = <12>;
nand-ecc-step-size = <1024>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
......@@ -104,6 +79,33 @@ partition@5140000 {
};
};
&bch {
status = "okay";
&pio {
nand_pins_default: nanddefault {
pins_ale {
pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins_dat {
pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
<MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
<MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
<MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
<MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
<MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
<MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
<MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
<MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
input-enable;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up;
};
pins_we {
pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
};
};
};
arch/arm/boot/dts/mt7623n-rfb.dtsi
View file @ dfff569a
......@@ -18,6 +18,12 @@
#include "mt6323.dtsi"
/ {
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
};
chosen {
stdout-path = "serial2:115200n8";
};
......@@ -44,12 +50,6 @@ memory@80000000 {
reg = <0 0x80000000 0 0x40000000>;
};
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
};
usb_p1_vbus: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
......@@ -60,6 +60,16 @@ usb_p1_vbus: regulator@0 {
};
};
&mmc0 {
vmmc-supply = <&mt6323_vemc3v3_reg>;
vqmmc-supply = <&mt6323_vio18_reg>;
};
&mmc1 {
vmmc-supply = <&mt6323_vmch_reg>;
vqmmc-supply = <&mt6323_vmc_reg>;
};
&uart0 {
status = "okay";
};
......@@ -72,16 +82,6 @@ &uart2 {
status = "okay";
};
&mmc0 {
vmmc-supply = <&mt6323_vemc3v3_reg>;
vqmmc-supply = <&mt6323_vio18_reg>;
};
&mmc1 {
vmmc-supply = <&mt6323_vmch_reg>;
vqmmc-supply = <&mt6323_vmc_reg>;
};
&usb1 {
vbus-supply = <&usb_p1_vbus>;
status = "okay";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7