Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input subsystem fixes from Dmitry Torokhov:

 - a couple of regression fixes in synaptics and axp20x-pek drivers

 - try to ease transition from PS/2 to RMI for Synaptics touchpad users
   by ensuring we do not try to activate RMI mode when RMI SMBus support
   is not enabled, and nag users a bit to enable it

 - plus a couple of other changes that seemed worthwhile for this
   release

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too
  Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail
  Input: tm2-touchkey - use LEN_ON as boolean value instead of LED_FULL
  Input: synaptics - tell users to report when they should be using rmi-smbus
  Input: synaptics - warn the users when there is a better mode
  Input: synaptics - keep PS/2 around when RMI4_SMB is not enabled
  Input: synaptics - clear device info before filling in
  Input: silead - disable interrupt during suspend

drivers/input/keyboard/tm2-touchkey.c

@@ -213,7 +213,7 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 	/* led device */
 	touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME;
 	touchkey->led_dev.brightness = LED_FULL;
-	touchkey->led_dev.max_brightness = LED_FULL;
+	touchkey->led_dev.max_brightness = LED_ON;
 	touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set;
 
 	error = devm_led_classdev_register(&client->dev, &touchkey->led_dev);

drivers/input/misc/axp20x-pek.c

@@ -256,6 +256,42 @@ static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek,
 	return 0;
 }
 
+#ifdef CONFIG_ACPI
+static bool axp20x_pek_should_register_input(struct axp20x_pek *axp20x_pek,
+					     struct platform_device *pdev)
+{
+	unsigned long long hrv = 0;
+	acpi_status status;
+
+	if (IS_ENABLED(CONFIG_INPUT_SOC_BUTTON_ARRAY) &&
+	    axp20x_pek->axp20x->variant == AXP288_ID) {
+		status = acpi_evaluate_integer(ACPI_HANDLE(pdev->dev.parent),
+					       "_HRV", NULL, &hrv);
+		if (ACPI_FAILURE(status))
+			dev_err(&pdev->dev, "Failed to get PMIC hardware revision\n");
+
+		/*
+		 * On Cherry Trail platforms (hrv == 3), do not register the
+		 * input device if there is an "INTCFD9" or "ACPI0011" gpio
+		 * button ACPI device, as that handles the power button too,
+		 * and otherwise we end up reporting all presses twice.
+		 */
+		if (hrv == 3 && (acpi_dev_present("INTCFD9", NULL, -1) ||
+				 acpi_dev_present("ACPI0011", NULL, -1)))
+			return false;
+
+	}
+
+	return true;
+}
+#else
+static bool axp20x_pek_should_register_input(struct axp20x_pek *axp20x_pek,
+					     struct platform_device *pdev)
+{
+	return true;
+}
+#endif
+
 static int axp20x_pek_probe(struct platform_device *pdev)
 {
 	struct axp20x_pek *axp20x_pek;
@@ -268,13 +304,7 @@ static int axp20x_pek_probe(struct platform_device *pdev)
 
 	axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent);
 
-	/*
-	 * Do not register the input device if there is an "INTCFD9"
-	 * gpio button ACPI device, that handles the power button too,
-	 * and otherwise we end up reporting all presses twice.
-	 */
-	if (!acpi_dev_found("INTCFD9") ||
-	    !IS_ENABLED(CONFIG_INPUT_SOC_BUTTON_ARRAY)) {
+	if (axp20x_pek_should_register_input(axp20x_pek, pdev)) {
 		error = axp20x_pek_probe_input_device(axp20x_pek, pdev);
 		if (error)
 			return error;

drivers/input/mouse/synaptics.c

@@ -176,6 +176,12 @@ static const char * const smbus_pnp_ids[] = {
 	NULL
 };
 
+static const char * const forcepad_pnp_ids[] = {
+	"SYN300D",
+	"SYN3014",
+	NULL
+};
+
 /*
  * Send a command to the synpatics touchpad by special commands
  */
@@ -397,6 +403,8 @@ static int synaptics_query_hardware(struct psmouse *psmouse,
 {
 	int error;
 
+	memset(info, 0, sizeof(*info));
+
 	error = synaptics_identify(psmouse, info);
 	if (error)
 		return error;
@@ -480,13 +488,6 @@ static const struct min_max_quirk min_max_pnpid_table[] = {
 	{ }
 };
 
-/* This list has been kindly provided by Synaptics. */
-static const char * const forcepad_pnp_ids[] = {
-	"SYN300D",
-	"SYN3014",
-	NULL
-};
-
 /*****************************************************************************
  *	Synaptics communications functions
  ****************************************************************************/
@@ -1687,7 +1688,8 @@ enum {
 	SYNAPTICS_INTERTOUCH_ON,
 };
 
-static int synaptics_intertouch = SYNAPTICS_INTERTOUCH_NOT_SET;
+static int synaptics_intertouch = IS_ENABLED(CONFIG_RMI4_SMB) ?
+		SYNAPTICS_INTERTOUCH_NOT_SET : SYNAPTICS_INTERTOUCH_OFF;
 module_param_named(synaptics_intertouch, synaptics_intertouch, int, 0644);
 MODULE_PARM_DESC(synaptics_intertouch, "Use a secondary bus for the Synaptics device.");
 
@@ -1737,8 +1739,16 @@ static int synaptics_setup_intertouch(struct psmouse *psmouse,
 
 	if (synaptics_intertouch == SYNAPTICS_INTERTOUCH_NOT_SET) {
 		if (!psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) &&
-		    !psmouse_matches_pnp_id(psmouse, smbus_pnp_ids))
+		    !psmouse_matches_pnp_id(psmouse, smbus_pnp_ids)) {
+
+			if (!psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids))
+				psmouse_info(psmouse,
+					     "Your touchpad (%s) says it can support a different bus. "
+					     "If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.\n",
+					     psmouse->ps2dev.serio->firmware_id);
+
 			return -ENXIO;
+		}
 	}
 
 	psmouse_info(psmouse, "Trying to set up SMBus access\n");
@@ -1810,6 +1820,15 @@ int synaptics_init(struct psmouse *psmouse)
 	}
 
 	if (SYN_CAP_INTERTOUCH(info.ext_cap_0c)) {
+		if ((!IS_ENABLED(CONFIG_RMI4_SMB) ||
+		     !IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS)) &&
+		    /* Forcepads need F21, which is not ready */
+		    !psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids)) {
+			psmouse_warn(psmouse,
+				     "The touchpad can support a better bus than the too old PS/2 protocol. "
+				     "Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.\n");
+		}
+
 		error = synaptics_setup_intertouch(psmouse, &info, true);
 		if (!error)
 			return PSMOUSE_SYNAPTICS_SMBUS;

drivers/input/touchscreen/silead.c

@@ -526,6 +526,7 @@ static int __maybe_unused silead_ts_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 
+	disable_irq(client->irq);
 	silead_ts_set_power(client, SILEAD_POWER_OFF);
 	return 0;
 }
@@ -551,6 +552,8 @@ static int __maybe_unused silead_ts_resume(struct device *dev)
 		return -ENODEV;
 	}
 
+	enable_irq(client->irq);
+
 	return 0;
 }