net: Remove depends on HAS_DMA in case of platform dependency

Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.

Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.

This simplifies the dependencies, and allows to improve compile-testing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/amd/Kconfig

@@ -173,7 +173,7 @@ config SUNLANCE
 
 config AMD_XGBE
 	tristate "AMD 10GbE Ethernet driver"
-	depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM && HAS_DMA
+	depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM
 	depends on X86 || ARM64 || COMPILE_TEST
 	select BITREVERSE
 	select CRC32

drivers/net/ethernet/apm/xgene-v2/Kconfig

 config NET_XGENE_V2
 	tristate "APM X-Gene SoC Ethernet-v2 Driver"
-	depends on HAS_DMA
 	depends on ARCH_XGENE || COMPILE_TEST
 	help
 	  This is the Ethernet driver for the on-chip ethernet interface

drivers/net/ethernet/apm/xgene/Kconfig

 config NET_XGENE
 	tristate "APM X-Gene SoC Ethernet Driver"
-	depends on HAS_DMA
 	depends on ARCH_XGENE || COMPILE_TEST
 	select PHYLIB
 	select MDIO_XGENE

drivers/net/ethernet/arc/Kconfig

@@ -24,7 +24,8 @@ config ARC_EMAC_CORE
 config ARC_EMAC
 	tristate "ARC EMAC support"
 	select ARC_EMAC_CORE
-	depends on OF_IRQ && OF_NET && HAS_DMA && (ARC || COMPILE_TEST)
+	depends on OF_IRQ && OF_NET
+	depends on ARC || COMPILE_TEST
 	---help---
 	  On some legacy ARC (Synopsys) FPGA boards such as ARCAngel4/ML50x
 	  non-standard on-chip ethernet device ARC EMAC 10/100 is used.
@@ -33,7 +34,8 @@ config ARC_EMAC
 config EMAC_ROCKCHIP
 	tristate "Rockchip EMAC support"
 	select ARC_EMAC_CORE
-	depends on OF_IRQ && OF_NET && REGULATOR && HAS_DMA && (ARCH_ROCKCHIP || COMPILE_TEST)
+	depends on OF_IRQ && OF_NET && REGULATOR
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
 	---help---
 	  Support for Rockchip RK3036/RK3066/RK3188 EMAC ethernet controllers.
 	  This selects Rockchip SoC glue layer support for the

drivers/net/ethernet/broadcom/Kconfig

@@ -157,7 +157,6 @@ config BGMAC
 config BGMAC_BCMA
 	tristate "Broadcom iProc GBit BCMA support"
 	depends on BCMA && BCMA_HOST_SOC
-	depends on HAS_DMA
 	depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
 	select BGMAC
 	select PHYLIB
@@ -170,7 +169,6 @@ config BGMAC_BCMA
 
 config BGMAC_PLATFORM
 	tristate "Broadcom iProc GBit platform support"
-	depends on HAS_DMA
 	depends on ARCH_BCM_IPROC || COMPILE_TEST
 	depends on OF
 	select BGMAC

drivers/net/ethernet/calxeda/Kconfig

 config NET_CALXEDA_XGMAC
 	tristate "Calxeda 1G/10G XGMAC Ethernet driver"
-	depends on HAS_IOMEM && HAS_DMA
+	depends on HAS_IOMEM
 	depends on ARCH_HIGHBANK || COMPILE_TEST
 	select CRC32
 	help

drivers/net/ethernet/hisilicon/Kconfig

@@ -5,7 +5,7 @@
 config NET_VENDOR_HISILICON
 	bool "Hisilicon devices"
 	default y
-	depends on (OF || ACPI) && HAS_DMA
+	depends on OF || ACPI
 	depends on ARM || ARM64 || COMPILE_TEST
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.

drivers/net/ethernet/marvell/Kconfig

@@ -18,8 +18,8 @@ if NET_VENDOR_MARVELL
 
 config MV643XX_ETH
 	tristate "Marvell Discovery (643XX) and Orion ethernet support"
-	depends on (MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST) && INET
-	depends on HAS_DMA
+	depends on MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST
+	depends on INET
 	select PHYLIB
 	select MVMDIO
 	---help---
@@ -58,7 +58,6 @@ config MVNETA_BM_ENABLE
 config MVNETA
 	tristate "Marvell Armada 370/38x/XP/37xx network interface support"
 	depends on ARCH_MVEBU || COMPILE_TEST
-	depends on HAS_DMA
 	select MVMDIO
 	select PHYLINK
 	---help---
@@ -84,7 +83,6 @@ config MVNETA_BM
 config MVPP2
 	tristate "Marvell Armada 375/7K/8K network interface support"
 	depends on ARCH_MVEBU || COMPILE_TEST
-	depends on HAS_DMA
 	select MVMDIO
 	select PHYLINK
 	---help---
@@ -93,7 +91,7 @@ config MVPP2
 
 config PXA168_ETH
 	tristate "Marvell pxa168 ethernet support"
-	depends on HAS_IOMEM && HAS_DMA
+	depends on HAS_IOMEM
 	depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST
 	select PHYLIB
 	---help---

drivers/net/ethernet/mellanox/mlxsw/Kconfig

@@ -30,7 +30,7 @@ config MLXSW_CORE_THERMAL
 
 config MLXSW_PCI
 	tristate "PCI bus implementation for Mellanox Technologies Switch ASICs"
-	depends on PCI && HAS_DMA && HAS_IOMEM && MLXSW_CORE
+	depends on PCI && HAS_IOMEM && MLXSW_CORE
 	default m
 	---help---
 	  This is PCI bus implementation for Mellanox Technologies Switch ASICs.

drivers/net/ethernet/renesas/Kconfig

@@ -17,7 +17,6 @@ if NET_VENDOR_RENESAS
 
 config SH_ETH
 	tristate "Renesas SuperH Ethernet support"
-	depends on HAS_DMA
 	depends on ARCH_RENESAS || SUPERH || COMPILE_TEST
 	select CRC32
 	select MII
@@ -31,7 +30,6 @@ config SH_ETH
 
 config RAVB
 	tristate "Renesas Ethernet AVB support"
-	depends on HAS_DMA
 	depends on ARCH_RENESAS || COMPILE_TEST
 	select CRC32
 	select MII

drivers/net/wireless/broadcom/brcm80211/Kconfig

@@ -60,7 +60,6 @@ config BRCMFMAC_PCIE
 	bool "PCIE bus interface support for FullMAC driver"
 	depends on BRCMFMAC
 	depends on PCI
-	depends on HAS_DMA
 	select BRCMFMAC_PROTO_MSGBUF
 	select FW_LOADER
 	---help---

drivers/net/wireless/quantenna/qtnfmac/Kconfig

@@ -7,7 +7,7 @@ config QTNFMAC
 config QTNFMAC_PEARL_PCIE
 	tristate "Quantenna QSR10g PCIe support"
 	default n
-	depends on HAS_DMA && PCI && CFG80211
+	depends on PCI && CFG80211
 	select QTNFMAC
 	select FW_LOADER
 	select CRC32