vga_switcheroo: Drop client power state VGA_SWITCHEROO_INIT

hda_intel.c:azx_probe() defers initialization of an audio controller
on the discrete GPU if the GPU is powered off. The power state of the
GPU is determined by calling vga_switcheroo_get_client_state().

vga_switcheroo_get_client_state() returns VGA_SWITCHEROO_INIT if
vga_switcheroo is not enabled, i.e. if no second GPU or no handler
has registered.

This can go wrong in the following scenario:
- Driver for the integrated GPU is not loaded.
- Driver for the discrete GPU registers with vga_switcheroo, uses driver
  power control to power down the GPU, handler cuts power to the GPU.
- Driver for the audio controller gets loaded after the GPU was powered
  down, calls vga_switcheroo_get_client_state() which returns
  VGA_SWITCHEROO_INIT instead of VGA_SWITCHEROO_OFF.
- Consequence: azx_probe() tries to initialize the audio controller even
  though the GPU is powered down.

The power state VGA_SWITCHEROO_INIT was introduced by c8e9cf7b
("vga_switcheroo: Add a helper function to get the client state").
It is not apparent what its benefit might be. The idea seems to
be to initialize the audio controller even if the power state is
VGA_SWITCHEROO_OFF (were vga_switcheroo enabled), but as shown
above this can fail.

Drop VGA_SWITCHEROO_INIT to solve this.
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drivers/gpu/vga/vga_switcheroo.c

@@ -356,8 +356,6 @@ enum vga_switcheroo_state vga_switcheroo_get_client_state(struct pci_dev *pdev)
 	client = find_client_from_pci(&vgasr_priv.clients, pdev);
 	if (!client)
 		ret = VGA_SWITCHEROO_NOT_FOUND;
-	else if (!vgasr_priv.active)
-		ret = VGA_SWITCHEROO_INIT;
 	else
 		ret = client->pwr_state;
 	mutex_unlock(&vgasr_mutex);

include/linux/vga_switcheroo.h

@@ -39,10 +39,6 @@ struct pci_dev;
  * enum vga_switcheroo_state - client power state
  * @VGA_SWITCHEROO_OFF: off
  * @VGA_SWITCHEROO_ON: on
- * @VGA_SWITCHEROO_INIT: client has registered with vga_switcheroo but
- * 	vga_switcheroo is not enabled, i.e. no second client or no handler
- * 	has registered. Only used in vga_switcheroo_get_client_state() which
- * 	in turn is only called from hda_intel.c
  * @VGA_SWITCHEROO_NOT_FOUND: client has not registered with vga_switcheroo.
  * 	Only used in vga_switcheroo_get_client_state() which in turn is only
  * 	called from hda_intel.c
@@ -53,7 +49,6 @@ enum vga_switcheroo_state {
 	VGA_SWITCHEROO_OFF,
 	VGA_SWITCHEROO_ON,
 	/* below are referred only from vga_switcheroo_get_client_state() */
-	VGA_SWITCHEROO_INIT,
 	VGA_SWITCHEROO_NOT_FOUND,
 };