Merge tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Most of these changes are Qualcomm SoC specific and came in just after
  I sent out the last set of fixes. This includes two regression fixes
  for SoC drivers, a defconfig change to ensure the Lenovo X13s is
  usable and 11 changes to DT files to fix regressions and minor
  platform specific issues.

  Tony and Chunyan step back from their respective maintainership roles
  on the omap and unisoc platforms, and Christophe in turn takes over
  maintaining some of the Freescale SoC drivers that he has been taking
  care of in practice already.

  Lastly, there are two trivial fixes for the davinci and sunxi
  platforms"

* tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: Update FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY
  MAINTAINERS: Add more maintainers for omaps
  ARM: davinci: Convert comma to semicolon
  MAINTAINERS: Move myself from SPRD Maintainer to Reviewer
  Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
  arm64: dts: qcom: qdu1000: Fix LLCC reg property
  arm64: dts: qcom: sm6115: add iommu for sdhc_1
  arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording
  arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping
  soc: qcom: pmic_glink: disable UCSI on sc8280xp
  arm64: defconfig: enable Elan i2c-hid driver
  arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset
  arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on
  arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI
  arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer
  arm64: dts: allwinner: Fix PMIC interrupt number
  arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
  arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
  arm64: dts: qcom: sc8180x: Fix LLCC reg property again

Documentation/devicetree/bindings/cache/qcom,llcc.yaml

@@ -66,7 +66,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,qdu1000-llcc
               - qcom,sc7180-llcc
               - qcom,sm6350-llcc
     then:
@@ -104,6 +103,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,qdu1000-llcc
               - qcom,sc8180x-llcc
               - qcom,sc8280xp-llcc
               - qcom,x1e80100-llcc

MAINTAINERS

@@ -2892,7 +2892,7 @@ F:	drivers/edac/altera_edac.[ch]
 ARM/SPREADTRUM SoC SUPPORT
 M:	Orson Zhai <orsonzhai@gmail.com>
 M:	Baolin Wang <baolin.wang7@gmail.com>
-M:	Chunyan Zhang <zhang.lyra@gmail.com>
+R:	Chunyan Zhang <zhang.lyra@gmail.com>
 S:	Maintained
 F:	arch/arm64/boot/dts/sprd
 N:	sprd
@@ -8832,6 +8832,7 @@ F:	drivers/spi/spi-fsl-qspi.c
 
 FREESCALE QUICC ENGINE LIBRARY
 M:	Qiang Zhao <qiang.zhao@nxp.com>
+M:	Christophe Leroy <christophe.leroy@csgroup.eu>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	drivers/soc/fsl/qe/
@@ -8881,9 +8882,10 @@ S:	Maintained
 F:	drivers/tty/serial/ucc_uart.c
 
 FREESCALE SOC DRIVERS
+M:	Christophe Leroy <christophe.leroy@csgroup.eu>
 L:	linuxppc-dev@lists.ozlabs.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Orphan
+S:	Maintained
 F:	Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
 F:	Documentation/devicetree/bindings/soc/fsl/
 F:	drivers/soc/fsl/
@@ -16445,7 +16447,7 @@ F:	arch/arm/boot/dts/ti/omap/am335x-nano.dts
 OMAP1 SUPPORT
 M:	Aaro Koskinen <aaro.koskinen@iki.fi>
 M:	Janusz Krzysztofik <jmkrzyszt@gmail.com>
-M:	Tony Lindgren <tony@atomide.com>
+R:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 Q:	http://patchwork.kernel.org/project/linux-omap/list/
@@ -16457,10 +16459,13 @@ F:	include/linux/platform_data/ams-delta-fiq.h
 F:	include/linux/platform_data/i2c-omap.h
 
 OMAP2+ SUPPORT
+M:	Aaro Koskinen <aaro.koskinen@iki.fi>
+M:	Andreas Kemnade <andreas@kemnade.info>
+M:	Kevin Hilman <khilman@baylibre.com>
+M:	Roger Quadros <rogerq@kernel.org>
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
-W:	http://www.muru.com/linux/omap/
 W:	http://linux.omap.com/
 Q:	http://patchwork.kernel.org/project/linux-omap/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git

arch/arm/mach-davinci/pm.c

@@ -61,7 +61,7 @@ static void davinci_pm_suspend(void)
 
 	/* Configure sleep count in deep sleep register */
 	val = __raw_readl(pm_config.deepsleep_reg);
-	val &= ~DEEPSLEEP_SLEEPCOUNT_MASK,
+	val &= ~DEEPSLEEP_SLEEPCOUNT_MASK;
 	val |= pm_config.sleepcount;
 	__raw_writel(val, pm_config.deepsleep_reg);
 

arch/arm64/boot/dts/allwinner/sun50i-h64-remix-mini-pc.dts

@@ -191,7 +191,7 @@ axp803: pmic@3a3 {
 		compatible = "x-powers,axp803";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		x-powers,drive-vbus-en;
 
 		vin1-supply = <&reg_vcc5v>;

arch/arm64/boot/dts/qcom/qdu1000.dtsi

@@ -1459,9 +1459,23 @@ gem_noc: interconnect@19100000 {
 
 		system-cache-controller@19200000 {
 			compatible = "qcom,qdu1000-llcc";
-			reg = <0 0x19200000 0 0xd80000>,
+			reg = <0 0x19200000 0 0x80000>,
+			      <0 0x19300000 0 0x80000>,
+			      <0 0x19600000 0 0x80000>,
+			      <0 0x19700000 0 0x80000>,
+			      <0 0x19a00000 0 0x80000>,
+			      <0 0x19b00000 0 0x80000>,
+			      <0 0x19e00000 0 0x80000>,
+			      <0 0x19f00000 0 0x80000>,
 			      <0 0x1a200000 0 0x80000>;
 			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc4_base",
+				    "llcc5_base",
+				    "llcc6_base",
+				    "llcc7_base",
 				    "llcc_broadcast_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};

arch/arm64/boot/dts/qcom/sa8775p.dtsi

@@ -3605,7 +3605,7 @@ arch_timer: timer {
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pcie0: pcie@1c00000 {

arch/arm64/boot/dts/qcom/sc8180x.dtsi

@@ -2647,11 +2647,14 @@ usb_sec_dpphy: dp-phy@88ef200 {
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc8180x-llcc";
-			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
-			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
-			      <0 0x09600000 0 0x50000>;
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+			      <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>,
+			      <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
 			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
-				    "llcc3_base", "llcc_broadcast_base";
+				    "llcc3_base", "llcc4_base", "llcc5_base",
+				    "llcc6_base", "llcc7_base",  "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 

arch/arm64/boot/dts/qcom/sc8280xp-crd.dts

@@ -977,8 +977,7 @@ int-n-pins {
 		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
-			output-high;
-			drive-strength = <16>;
+			bias-disable;
 		};
 	};
 

arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts

@@ -655,15 +655,16 @@ &i2c4 {
 
 	status = "okay";
 
-	/* FIXME: verify */
 	touchscreen@10 {
-		compatible = "hid-over-i2c";
+		compatible = "elan,ekth5015m", "elan,ekth6915";
 		reg = <0x10>;
 
-		hid-descr-addr = <0x1>;
 		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_s10b>;
+		reset-gpios = <&tlmm 99 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		no-reset-on-power-off;
+
+		vcc33-supply = <&vreg_misc_3p3>;
+		vccio-supply = <&vreg_misc_3p3>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&ts0_default>;
@@ -1496,8 +1497,8 @@ int-n-pins {
 		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
-			output-high;
-			drive-strength = <16>;
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 

arch/arm64/boot/dts/qcom/sc8280xp.dtsi

@@ -4623,6 +4623,8 @@ tsens0: thermal-sensor@c263000 {
 		restart@c264000 {
 			compatible = "qcom,pshold";
 			reg = <0 0x0c264000 0 0x4>;
+			/* TZ seems to block access */
+			status = "reserved";
 		};
 
 		tsens1: thermal-sensor@c265000 {

arch/arm64/boot/dts/qcom/sm6115.dtsi

@@ -1090,6 +1090,7 @@ sdhc_1: mmc@4744000 {
 
 			power-domains = <&rpmpd SM6115_VDDCX>;
 			operating-points-v2 = <&sdhc1_opp_table>;
+			iommus = <&apps_smmu 0x00c0 0x0>;
 			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
 					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
 					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG

arch/arm64/boot/dts/qcom/x1e80100-crd.dts

@@ -49,6 +49,15 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	sound {
 		compatible = "qcom,x1e80100-sndcard";
 		model = "X1E80100-CRD";
@@ -93,7 +102,7 @@ cpu {
 			};
 
 			codec {
-				sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
 			};
 
 			platform {
@@ -744,7 +753,7 @@ &swr2 {
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		qcom,tx-port-mapping = <1 1 2 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
 	};
 };
 

arch/arm64/boot/dts/qcom/x1e80100-qcp.dts

@@ -23,6 +23,15 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 

arch/arm64/boot/dts/qcom/x1e80100.dtsi

@@ -2737,15 +2737,17 @@ pcie6a: pci@1bf8000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-x1e80100";
 			reg = <0 0x01bf8000 0 0x3000>,
-			      <0 0x70000000 0 0xf1d>,
-			      <0 0x70000f20 0 0xa8>,
+			      <0 0x70000000 0 0xf20>,
+			      <0 0x70000f40 0 0xa8>,
 			      <0 0x70001000 0 0x1000>,
-			      <0 0x70100000 0 0x100000>;
+			      <0 0x70100000 0 0x100000>,
+			      <0 0x01bfb000 0 0x1000>;
 			reg-names = "parf",
 				    "dbi",
 				    "elbi",
 				    "atu",
-				    "config";
+				    "config",
+				    "mhi";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>,

arch/arm64/configs/defconfig

@@ -1036,6 +1036,7 @@ CONFIG_SND_AUDIO_GRAPH_CARD2=m
 CONFIG_HID_MULTITOUCH=m
 CONFIG_I2C_HID_ACPI=m
 CONFIG_I2C_HID_OF=m
+CONFIG_I2C_HID_OF_ELAN=m
 CONFIG_USB=y
 CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y

drivers/soc/qcom/pmic_glink.c

@@ -348,11 +348,15 @@ static void pmic_glink_remove(struct platform_device *pdev)
 	mutex_unlock(&__pmic_glink_lock);
 }
 
+static const unsigned long pmic_glink_sc8280xp_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
+							     BIT(PMIC_GLINK_CLIENT_ALTMODE);
+
 static const unsigned long pmic_glink_sm8450_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
 							   BIT(PMIC_GLINK_CLIENT_ALTMODE) |
 							   BIT(PMIC_GLINK_CLIENT_UCSI);
 
 static const struct of_device_id pmic_glink_of_match[] = {
+	{ .compatible = "qcom,sc8280xp-pmic-glink", .data = &pmic_glink_sc8280xp_client_mask },
 	{ .compatible = "qcom,pmic-glink", .data = &pmic_glink_sm8450_client_mask },
 	{}
 };