Commit e0a59310 authored by Sonic Zhang's avatar Sonic Zhang Committed by Bob Liu

bf60x: sec: Enable sec interrupt source priority configuration.

Customize the SEC interrupt priority array in machine ints-priority.c.
Signed-off-by: default avatarSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: default avatarBob Liu <lliubbo@gmail.com>
parent 11b27cb5
......@@ -51,6 +51,14 @@ config PINT5_ASSIGN
endmenu
config SEC_IRQ_PRIORITY_LEVELS
int "SEC interrupt priority levels"
default 7
range 0 7
help
Devide the total number of interrupt priority levels into sub-levels.
There is 2 ^ (SEC_IRQ_PRIORITY_LEVELS + 1) different levels.
endmenu
endif
......@@ -2,5 +2,5 @@
# arch/blackfin/mach-bf609/Makefile
#
obj-y := dma.o clock.o
obj-y := dma.o clock.o ints-priority.o
obj-$(CONFIG_PM) += pm.o dpm.o
......@@ -293,9 +293,13 @@
#define NR_MACH_IRQS (IRQ_PG15 + 1)
#define SEC_SCTL_PRIO_OFFSET 8
#ifndef __ASSEMBLY__
#include <linux/types.h>
extern u8 sec_int_priority[];
/*
* bfin pint registers layout
*/
......
/*
* Copyright 2007-2008 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*
* Set up the interrupt priorities
*/
#include <linux/module.h>
#include <linux/irq.h>
#include <asm/blackfin.h>
u8 sec_int_priority[] = {
255, /* IRQ_SEC_ERR */
255, /* IRQ_CGU_EVT */
254, /* IRQ_WATCH0 */
254, /* IRQ_WATCH1 */
253, /* IRQ_L2CTL0_ECC_ERR */
253, /* IRQ_L2CTL0_ECC_WARN */
253, /* IRQ_C0_DBL_FAULT */
253, /* IRQ_C1_DBL_FAULT */
252, /* IRQ_C0_HW_ERR */
252, /* IRQ_C1_HW_ERR */
255, /* IRQ_C0_NMI_L1_PARITY_ERR */
255, /* IRQ_C1_NMI_L1_PARITY_ERR */
50, /* IRQ_TIMER0 */
50, /* IRQ_TIMER1 */
50, /* IRQ_TIMER2 */
50, /* IRQ_TIMER3 */
50, /* IRQ_TIMER4 */
50, /* IRQ_TIMER5 */
50, /* IRQ_TIMER6 */
50, /* IRQ_TIMER7 */
50, /* IRQ_TIMER_STAT */
0, /* IRQ_PINT0 */
0, /* IRQ_PINT1 */
0, /* IRQ_PINT2 */
0, /* IRQ_PINT3 */
0, /* IRQ_PINT4 */
0, /* IRQ_PINT5 */
0, /* IRQ_CNT */
50, /* RQ_PWM0_TRIP */
50, /* IRQ_PWM0_SYNC */
50, /* IRQ_PWM1_TRIP */
50, /* IRQ_PWM1_SYNC */
0, /* IRQ_TWI0 */
0, /* IRQ_TWI1 */
10, /* IRQ_SOFT0 */
10, /* IRQ_SOFT1 */
10, /* IRQ_SOFT2 */
10, /* IRQ_SOFT3 */
0, /* IRQ_ACM_EVT_MISS */
0, /* IRQ_ACM_EVT_COMPLETE */
0, /* IRQ_CAN0_RX */
0, /* IRQ_CAN0_TX */
0, /* IRQ_CAN0_STAT */
100, /* IRQ_SPORT0_TX */
100, /* IRQ_SPORT0_TX_STAT */
100, /* IRQ_SPORT0_RX */
100, /* IRQ_SPORT0_RX_STAT */
100, /* IRQ_SPORT1_TX */
100, /* IRQ_SPORT1_TX_STAT */
100, /* IRQ_SPORT1_RX */
100, /* IRQ_SPORT1_RX_STAT */
100, /* IRQ_SPORT2_TX */
100, /* IRQ_SPORT2_TX_STAT */
100, /* IRQ_SPORT2_RX */
100, /* IRQ_SPORT2_RX_STAT */
0, /* IRQ_SPI0_TX */
0, /* IRQ_SPI0_RX */
0, /* IRQ_SPI0_STAT */
0, /* IRQ_SPI1_TX */
0, /* IRQ_SPI1_RX */
0, /* IRQ_SPI1_STAT */
0, /* IRQ_RSI */
0, /* IRQ_RSI_INT0 */
0, /* IRQ_RSI_INT1 */
0, /* DMA11 Data (SDU) */
0, /* DMA12 Data (Reserved) */
0, /* Reserved */
0, /* Reserved */
30, /* IRQ_EMAC0_STAT */
0, /* EMAC0 Power (Reserved) */
30, /* IRQ_EMAC1_STAT */
0, /* EMAC1 Power (Reserved) */
0, /* IRQ_LP0 */
0, /* IRQ_LP0_STAT */
0, /* IRQ_LP1 */
0, /* IRQ_LP1_STAT */
0, /* IRQ_LP2 */
0, /* IRQ_LP2_STAT */
0, /* IRQ_LP3 */
0, /* IRQ_LP3_STAT */
0, /* IRQ_UART0_TX */
0, /* IRQ_UART0_RX */
0, /* IRQ_UART0_STAT */
0, /* IRQ_UART1_TX */
0, /* IRQ_UART1_RX */
0, /* IRQ_UART1_STAT */
0, /* IRQ_MDMA0_SRC_CRC0 */
0, /* IRQ_MDMA0_DEST_CRC0 */
0, /* IRQ_CRC0_DCNTEXP */
0, /* IRQ_CRC0_ERR */
0, /* IRQ_MDMA1_SRC_CRC1 */
0, /* IRQ_MDMA1_DEST_CRC1 */
0, /* IRQ_CRC1_DCNTEXP */
0, /* IRQ_CRC1_ERR */
0, /* IRQ_MDMA2_SRC */
0, /* IRQ_MDMA2_DEST */
0, /* IRQ_MDMA3_SRC */
0, /* IRQ_MDMA3_DEST */
120, /* IRQ_EPPI0_CH0 */
120, /* IRQ_EPPI0_CH1 */
120, /* IRQ_EPPI0_STAT */
120, /* IRQ_EPPI2_CH0 */
120, /* IRQ_EPPI2_CH1 */
120, /* IRQ_EPPI2_STAT */
120, /* IRQ_EPPI1_CH0 */
120, /* IRQ_EPPI1_CH1 */
120, /* IRQ_EPPI1_STAT */
120, /* IRQ_PIXC_CH0 */
120, /* IRQ_PIXC_CH1 */
120, /* IRQ_PIXC_CH2 */
120, /* IRQ_PIXC_STAT */
120, /* IRQ_PVP_CPDOB */
120, /* IRQ_PVP_CPDOC */
120, /* IRQ_PVP_CPSTAT */
120, /* IRQ_PVP_CPCI */
120, /* IRQ_PVP_STAT0 */
120, /* IRQ_PVP_MPDO */
120, /* IRQ_PVP_MPDI */
120, /* IRQ_PVP_MPSTAT */
120, /* IRQ_PVP_MPCI */
120, /* IRQ_PVP_CPDOA */
120, /* IRQ_PVP_STAT1 */
0, /* IRQ_USB_STAT */
0, /* IRQ_USB_DMA */
0, /* IRQ_TRU_INT0 */
0, /* IRQ_TRU_INT1 */
0, /* IRQ_TRU_INT2 */
0, /* IRQ_TRU_INT3 */
0, /* IRQ_DMAC0_ERROR */
0, /* IRQ_CGU0_ERROR */
0, /* Reserved */
0, /* IRQ_DPM */
0, /* Reserved */
0, /* IRQ_SWU0 */
0, /* IRQ_SWU1 */
0, /* IRQ_SWU2 */
0, /* IRQ_SWU3 */
0, /* IRQ_SWU4 */
0, /* IRQ_SWU4 */
0, /* IRQ_SWU6 */
};
......@@ -310,6 +310,23 @@ static void bfin_sec_disable(struct irq_data *d)
hard_local_irq_restore(flags);
}
static void bfin_sec_set_priority(unsigned int sec_int_levels, u8 *sec_int_priority)
{
unsigned long flags = hard_local_irq_save();
uint32_t reg_sctl;
int i;
bfin_write_SEC_SCI(0, SEC_CPLVL, sec_int_levels);
for (i = 0; i < SYS_IRQS - BFIN_IRQ(0); i++) {
reg_sctl = bfin_read_SEC_SCTL(i) & ~SEC_SCTL_PRIO;
reg_sctl |= sec_int_priority[i] << SEC_SCTL_PRIO_OFFSET;
bfin_write_SEC_SCTL(i, reg_sctl);
}
hard_local_irq_restore(flags);
}
static void bfin_sec_raise_irq(unsigned int sid)
{
unsigned long flags = hard_local_irq_save();
......@@ -1534,6 +1551,10 @@ int __init init_arch_irq(void)
printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
bfin_sec_set_priority(CONFIG_SEC_IRQ_PRIORITY_LEVELS, sec_int_priority);
bfin_sec_set_priority(CONFIG_SEC_IRQ_PRIORITY_LEVELS, sec_int_priority);
/* Enable interrupts IVG7-15 */
bfin_irq_flags |= IMASK_IVG15 |
IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment