Commit e0e34ef7 authored by James Simmons's avatar James Simmons Committed by Richard Purdie

backlight: Improve backlight selection for fbdev drivers

Improve backlight selection for fbdev drivers
Signed-off-by: default avatarJames Simmons <jsimmons@infradead.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarRichard Purdie <rpurdie@rpsys.net>
parent 37ce69a5
......@@ -4,20 +4,9 @@
menu "Graphics support"
config FIRMWARE_EDID
bool "Enable firmware EDID"
default y
---help---
This enables access to the EDID transferred from the firmware.
On the i386, this is from the Video BIOS. Enable this if DDC/I2C
transfers do not work for your driver and if you are using
nvidiafb, i810fb or savagefb.
In general, choosing Y for this option is safe. If you
experience extremely long delays while booting before you get
something on your display, try setting this to N. Matrox cards in
combination with certain motherboards and monitors are known to
suffer from this problem.
if SYSFS
source "drivers/video/backlight/Kconfig"
endif
config FB
tristate "Support for frame buffer devices"
......@@ -53,9 +42,27 @@ config FB
(e.g. an accelerated X server) and that are not frame buffer
device-aware may cause unexpected results. If unsure, say N.
config FIRMWARE_EDID
bool "Enable firmware EDID"
depends on FB
default n
---help---
This enables access to the EDID transferred from the firmware.
On the i386, this is from the Video BIOS. Enable this if DDC/I2C
transfers do not work for your driver and if you are using
nvidiafb, i810fb or savagefb.
In general, choosing Y for this option is safe. If you
experience extremely long delays while booting before you get
something on your display, try setting this to N. Matrox cards in
combination with certain motherboards and monitors are known to
suffer from this problem.
config FB_DDC
tristate
depends on FB && I2C && I2C_ALGOBIT
depends on FB
select I2C_ALGOBIT
select I2C
default n
config FB_CFB_FILLRECT
......@@ -134,6 +141,9 @@ config FB_TILEBLITTING
This is particularly important to one driver, matroxfb. If
unsure, say N.
comment "Frambuffer hardware drivers"
depends on FB
config FB_CIRRUS
tristate "Cirrus Logic support"
depends on FB && (ZORRO || PCI)
......@@ -671,6 +681,7 @@ config FB_NVIDIA
depends on FB && PCI
select I2C_ALGOBIT if FB_NVIDIA_I2C
select I2C if FB_NVIDIA_I2C
select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
......@@ -699,8 +710,7 @@ config FB_NVIDIA_I2C
config FB_NVIDIA_BACKLIGHT
bool "Support for backlight control"
depends on FB_NVIDIA && PMAC_BACKLIGHT
select FB_BACKLIGHT
depends on FB_NVIDIA
default y
help
Say Y here if you want to control the backlight of your display.
......@@ -708,9 +718,8 @@ config FB_NVIDIA_BACKLIGHT
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
select I2C_ALGOBIT if FB_RIVA_I2C
select I2C if FB_RIVA_I2C
select FB_DDC if FB_RIVA_I2C
select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
......@@ -747,8 +756,7 @@ config FB_RIVA_DEBUG
config FB_RIVA_BACKLIGHT
bool "Support for backlight control"
depends on FB_RIVA && PMAC_BACKLIGHT
select FB_BACKLIGHT
depends on FB_RIVA
default y
help
Say Y here if you want to control the backlight of your display.
......@@ -798,8 +806,6 @@ config FB_I810_GTF
config FB_I810_I2C
bool "Enable DDC Support"
depends on FB_I810 && FB_I810_GTF
select I2C
select I2C_ALGOBIT
select FB_DDC
help
......@@ -989,9 +995,8 @@ config FB_MATROX_MULTIHEAD
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
select I2C_ALGOBIT if FB_RADEON_I2C
select I2C if FB_RADEON_I2C
select FB_DDC if FB_RADEON_I2C
select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
......@@ -1021,8 +1026,7 @@ config FB_RADEON_I2C
config FB_RADEON_BACKLIGHT
bool "Support for backlight control"
depends on FB_RADEON && PMAC_BACKLIGHT
select FB_BACKLIGHT
depends on FB_RADEON
default y
help
Say Y here if you want to control the backlight of your display.
......@@ -1042,6 +1046,7 @@ config FB_ATY128
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
select FB_MACMODES if PPC_PMAC
help
This driver supports graphics boards with the ATI Rage128 chips.
......@@ -1053,8 +1058,7 @@ config FB_ATY128
config FB_ATY128_BACKLIGHT
bool "Support for backlight control"
depends on FB_ATY128 && PMAC_BACKLIGHT
select FB_BACKLIGHT
depends on FB_ATY128
default y
help
Say Y here if you want to control the backlight of your display.
......@@ -1065,6 +1069,7 @@ config FB_ATY
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_BACKLIGHT if FB_ATY_BACKLIGHT
select FB_MACMODES if PPC
help
This driver supports graphics boards with the ATI Mach64 chips.
......@@ -1103,8 +1108,7 @@ config FB_ATY_GX
config FB_ATY_BACKLIGHT
bool "Support for backlight control"
depends on FB_ATY && PMAC_BACKLIGHT
select FB_BACKLIGHT
depends on FB_ATY
default y
help
Say Y here if you want to control the backlight of your display.
......@@ -1123,8 +1127,6 @@ config FB_S3
config FB_SAVAGE
tristate "S3 Savage support"
depends on FB && PCI && EXPERIMENTAL
select I2C_ALGOBIT if FB_SAVAGE_I2C
select I2C if FB_SAVAGE_I2C
select FB_DDC if FB_SAVAGE_I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
......@@ -1639,6 +1641,7 @@ config FB_VIRTUAL
the vfb_enable=1 option.
If unsure, say N.
if VT
source "drivers/video/console/Kconfig"
endif
......@@ -1647,9 +1650,5 @@ if FB || SGI_NEWPORT_CONSOLE
source "drivers/video/logo/Kconfig"
endif
if SYSFS
source "drivers/video/backlight/Kconfig"
endif
endmenu
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment