ARM: dts: fix the chip select gpios definition in the SPI nodes

This patch replaces the "cs-gpio" from "controller-data" node
as was specified in the old binding and uses the standard
"cs-gpios" property expected by the SPI core as is defined now
in the spi-s3c64xx driver DT binding.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

arch/arm/boot/dts/exynos4210-smdkv310.dts

@@ -168,6 +168,7 @@ eeprom@52 {
 	};
 
 	spi_2: spi@13940000 {
+		cs-gpios = <&gpc1 2 0>;
 		status = "okay";
 
 		w25x80@0 {
@@ -178,7 +179,6 @@ w25x80@0 {
 			spi-max-frequency = <1000000>;
 
 			controller-data {
-				cs-gpio = <&gpc1 2 0>;
 				samsung,spi-feedback-delay = <0>;
 			};
 

arch/arm/boot/dts/exynos4412-trats2.dts

@@ -589,6 +589,7 @@ cm36651@18 {
 	spi_1: spi@13930000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_bus>;
+		cs-gpios = <&gpb 5 0>;
 		status = "okay";
 
 		s5c73m3_spi: s5c73m3 {
@@ -596,7 +597,6 @@ s5c73m3_spi: s5c73m3 {
 			spi-max-frequency = <50000000>;
 			reg = <0>;
 			controller-data {
-				cs-gpio = <&gpb 5 0>;
 				samsung,spi-feedback-delay = <2>;
 			};
 		};

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -316,6 +316,7 @@ slot@0 {
 	};
 
 	spi_1: spi@12d30000 {
+		cs-gpios = <&gpa2 5 0>;
 		status = "okay";
 
 		w25q80bw@0 {
@@ -326,7 +327,6 @@ w25q80bw@0 {
 			spi-max-frequency = <1000000>;
 
 			controller-data {
-				cs-gpio = <&gpa2 5 0>;
 				samsung,spi-feedback-delay = <0>;
 			};