Commit e13ee546 authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz Committed by David S. Miller

sis5513: fix PIO setup for ATAPI devices

Clear prefetch setting before potentially (re-)enabling it in
config_drive_art_rwp() so the transition of the device type on
the port from ATA to ATAPI (i.e. during warm-plug operation)
is handled correctly.

This is a really old bug (it probably goes back to very early
days of the driver) but it was only affecting warm-plug operation
until the recent "ide: try to use PIO Mode 0 during probe if
possible" change (commit 60293364).
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Tested-by: default avatarDavid Fries <david@fries.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 24df31ac
......@@ -2,7 +2,7 @@
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
* Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
* Copyright (C) 2007-2009 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
*
......@@ -281,11 +281,13 @@ static void config_drive_art_rwp(ide_drive_t *drive)
pci_read_config_byte(dev, 0x4b, &reg4bh);
rw_prefetch = reg4bh & ~(0x11 << drive->dn);
if (drive->media == ide_disk)
rw_prefetch = 0x11 << drive->dn;
rw_prefetch |= 0x11 << drive->dn;
if ((reg4bh & (0x11 << drive->dn)) != rw_prefetch)
pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
if (reg4bh != rw_prefetch)
pci_write_config_byte(dev, 0x4b, rw_prefetch);
}
static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment