Commit e1402c66 authored by Jagan Teki's avatar Jagan Teki Committed by Robert Foss

dt-bindings: display: bridge: Add TI DLPC3433 DSI to DMD

TI DLPC3433 is a MIPI DSI based display controller bridge
for processing high resolution DMD based projectors.

It has a flexible configuration of MIPI DSI and DPI signal
input that produces a DMD output in RGB565, RGB666, RGB888
formats.

It supports upto 720p resolution with 60 and 120 Hz refresh
rates.

Add dt-bingings for it.
Signed-off-by: default avatarChristopher Vollo <chris@renewoutreach.org>
Signed-off-by: default avatarJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarRobert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603140349.3563612-1-jagan@amarulasolutions.com
parent c441d289
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/ti,dlpc3433.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI DLPC3433 MIPI DSI to DMD bridge
maintainers:
- Jagan Teki <jagan@amarulasolutions.com>
- Christopher Vollo <chris@renewoutreach.org>
description: |
TI DLPC3433 is a MIPI DSI based display controller bridge
for processing high resolution DMD based projectors.
It has a flexible configuration of MIPI DSI and DPI signal
input that produces a DMD output in RGB565, RGB666, RGB888
formats.
It supports upto 720p resolution with 60 and 120 Hz refresh
rates.
properties:
compatible:
const: ti,dlpc3433
reg:
enum:
- 0x1b
- 0x1d
enable-gpios:
description: PROJ_ON pin, chip powers up PROJ_ON is high.
vcc_intf-supply:
description: A 1.8V/3.3V supply that power the Host I/O.
vcc_flsh-supply:
description: A 1.8V/3.3V supply that power the Flash I/O.
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: Video port for MIPI DSI input.
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
description: array of physical DSI data lane indexes.
minItems: 1
items:
- const: 1
- const: 2
- const: 3
- const: 4
port@1:
$ref: /schemas/graph.yaml#/properties/port
description: Video port for DMD output.
required:
- port@0
- port@1
required:
- compatible
- reg
- enable-gpios
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c1 {
#address-cells = <1>;
#size-cells = <0>;
bridge@1b {
compatible = "ti,dlpc3433";
reg = <0x1b>;
enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
bridge_in_dsi: endpoint {
remote-endpoint = <&dsi_out_bridge>;
data-lanes = <1 2 3 4>;
};
};
port@1 {
reg = <1>;
bridge_out_panel: endpoint {
remote-endpoint = <&panel_out_bridge>;
};
};
};
};
};
......@@ -6431,6 +6431,11 @@ DRM DRIVER FOR TDFX VIDEO CARDS
S: Orphan / Obsolete
F: drivers/gpu/drm/tdfx/
DRM DRIVER FOR TI DLPC3433 MIPI DSI TO DMD BRIDGE
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
DRM DRIVER FOR TI SN65DSI86 BRIDGE CHIP
R: Douglas Anderson <dianders@chromium.org>
F: Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment