pinctrl: pinctrl-rockchip: Fix a bunch of kerneldoc misdemeanours

Demote headers which are clearly not kerneldoc, provide titles for
struct definition blocks, fix API slip (bitrot) misspellings and
provide some missing entries.

Fixes the following W=1 kernel build warning(s):

 drivers/pinctrl/pinctrl-rockchip.c:82: warning: cannot understand function prototype: 'struct rockchip_iomux '
 drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_drv_type'
 drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_OR_3V0' not described in enum 'rockchip_pin_drv_type'
 drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_drv_type'
 drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_3V0_AUTO' not described in enum 'rockchip_pin_drv_type'
 drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_3V3_ONLY' not described in enum 'rockchip_pin_drv_type'
 drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_MAX' not described in enum 'rockchip_pin_drv_type'
 drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_pull_type'
 drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_pull_type'
 drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_MAX' not described in enum 'rockchip_pin_pull_type'
 drivers/pinctrl/pinctrl-rockchip.c:109: warning: Cannot understand  * @drv_type: drive strength variant using rockchip_perpin_drv_type
 on line 109 - I thought it was a doc line
 drivers/pinctrl/pinctrl-rockchip.c:122: warning: Cannot understand  * @reg_base: register base of the gpio bank
 on line 109 - I thought it was a doc line
 drivers/pinctrl/pinctrl-rockchip.c:325: warning: Function parameter or member 'route_location' not described in 'rockchip_mux_route_data'
 drivers/pinctrl/pinctrl-rockchip.c:328: warning: Cannot understand  */
 on line 109 - I thought it was a doc line
 drivers/pinctrl/pinctrl-rockchip.c:375: warning: Function parameter or member 'data' not described in 'rockchip_pin_group'
 drivers/pinctrl/pinctrl-rockchip.c:387: warning: Function parameter or member 'ngroups' not described in 'rockchip_pmx_func'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: linux-rockchip@lists.infradead.org
Link: https://lore.kernel.org/r/20200713144930.1034632-20-lee.jones@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/pinctrl-rockchip.c

@@ -63,7 +63,7 @@ enum rockchip_pinctrl_type {
 	RK3399,
 };
 
-/**
+/*
  * Encode variants of iomux registers into a type variable
  */
 #define IOMUX_GPIO_ONLY		BIT(0)
@@ -74,6 +74,7 @@ enum rockchip_pinctrl_type {
 #define IOMUX_WIDTH_2BIT	BIT(5)
 
 /**
+ * struct rockchip_iomux
  * @type: iomux variant using IOMUX_* constants
  * @offset: if initialized to -1 it will be autocalculated, by specifying
  *	    an initial offset value the relevant source offset can be reset
@@ -84,7 +85,7 @@ struct rockchip_iomux {
 	int				offset;
 };
 
-/**
+/*
  * enum type index corresponding to rockchip_perpin_drv_list arrays index.
  */
 enum rockchip_pin_drv_type {
@@ -96,7 +97,7 @@ enum rockchip_pin_drv_type {
 	DRV_TYPE_MAX
 };
 
-/**
+/*
  * enum type index corresponding to rockchip_pull_list arrays index.
  */
 enum rockchip_pin_pull_type {
@@ -106,6 +107,7 @@ enum rockchip_pin_pull_type {
 };
 
 /**
+ * struct rockchip_drv
  * @drv_type: drive strength variant using rockchip_perpin_drv_type
  * @offset: if initialized to -1 it will be autocalculated, by specifying
  *	    an initial offset value the relevant source offset can be reset
@@ -119,8 +121,9 @@ struct rockchip_drv {
 };
 
 /**
+ * struct rockchip_pin_bank
  * @reg_base: register base of the gpio bank
- * @reg_pull: optional separate register for additional pull settings
+ * @regmap_pull: optional separate register for additional pull settings
  * @clk: clock of the gpio bank
  * @irq: interrupt of the gpio bank
  * @saved_masks: Saved content of GPIO_INTEN at suspend time.
@@ -138,6 +141,8 @@ struct rockchip_drv {
  * @gpio_chip: gpiolib chip
  * @grange: gpio range
  * @slock: spinlock for the gpio bank
+ * @toggle_edge_mode: bit mask to toggle (falling/rising) edge mode
+ * @recalced_mask: bit mask to indicate a need to recalulate the mask
  * @route_mask: bits describing the routing pins of per bank
  */
 struct rockchip_pin_bank {
@@ -312,6 +317,7 @@ enum rockchip_mux_route_location {
  * @bank_num: bank number.
  * @pin: index at register or used to calc index.
  * @func: the min pin.
+ * @route_location: the mux route location (same, pmu, grf).
  * @route_offset: the max pin.
  * @route_val: the register offset.
  */
@@ -324,8 +330,6 @@ struct rockchip_mux_route_data {
 	u32 route_val;
 };
 
-/**
- */
 struct rockchip_pin_ctrl {
 	struct rockchip_pin_bank	*pin_banks;
 	u32				nr_banks;
@@ -363,9 +367,7 @@ struct rockchip_pin_config {
  * @name: name of the pin group, used to lookup the group.
  * @pins: the pins included in this group.
  * @npins: number of pins included in this group.
- * @func: the mux function number to be programmed when selected.
- * @configs: the config values to be set for each pin
- * @nconfigs: number of configs for each pin
+ * @data: local pin configuration
  */
 struct rockchip_pin_group {
 	const char			*name;
@@ -378,7 +380,7 @@ struct rockchip_pin_group {
  * struct rockchip_pmx_func: represent a pin function.
  * @name: name of the pin function, used to lookup the function.
  * @groups: one or more names of pin groups that provide this function.
- * @num_groups: number of groups included in @groups.
+ * @ngroups: number of groups included in @groups.
  */
 struct rockchip_pmx_func {
 	const char		*name;