i386: prepare shared kernel/Makefile

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/i386/kernel/Makefile

-#
-# Makefile for the linux kernel.
-#
-
-extra-y := head_32.o init_task_32.o vmlinux.lds
-
-obj-y	:= process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \
-		ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \
-		pci-dma_32.o i386_ksyms_32.o i387_32.o bootflag.o e820_32.o\
-		quirks.o i8237.o topology.o alternative.o i8253_32.o tsc_32.o
-
-obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-y				+= cpu/
-obj-y				+= acpi/
-obj-$(CONFIG_X86_BIOS_REBOOT)	+= reboot_32.o
-obj-$(CONFIG_MCA)		+= mca_32.o
-obj-$(CONFIG_X86_MSR)		+= msr.o
-obj-$(CONFIG_X86_CPUID)		+= cpuid.o
-obj-$(CONFIG_MICROCODE)		+= microcode.o
-obj-$(CONFIG_APM)		+= apm_32.o
-obj-$(CONFIG_X86_SMP)		+= smp_32.o smpboot_32.o tsc_sync.o
-obj-$(CONFIG_SMP)		+= smpcommon_32.o
-obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_32.o
-obj-$(CONFIG_X86_MPPARSE)	+= mpparse_32.o
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic_32.o nmi_32.o
-obj-$(CONFIG_X86_IO_APIC)	+= io_apic_32.o
-obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec_32.o relocate_kernel_32.o crash_32.o
-obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_32.o
-obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
-obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit_32.o
-obj-$(CONFIG_KPROBES)		+= kprobes_32.o
-obj-$(CONFIG_MODULES)		+= module_32.o
-obj-y				+= sysenter_32.o vsyscall_32.o
-obj-$(CONFIG_ACPI_SRAT) 	+= srat_32.o
-obj-$(CONFIG_EFI) 		+= efi_32.o efi_stub_32.o
-obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
-obj-$(CONFIG_VM86)		+= vm86_32.o
-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-obj-$(CONFIG_HPET_TIMER) 	+= hpet_32.o
-obj-$(CONFIG_K8_NB)		+= k8.o
-obj-$(CONFIG_MGEODE_LX)		+= geode_32.o
-
-obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
-obj-$(CONFIG_PARAVIRT)		+= paravirt_32.o
-obj-y				+= pcspeaker.o
-
-obj-$(CONFIG_SCx200)		+= scx200_32.o
-
-# vsyscall_32.o contains the vsyscall DSO images as __initdata.
-# We must build both images before we can assemble it.
-# Note: kbuild does not track this dependency due to usage of .incbin
-$(obj)/vsyscall_32.o: $(obj)/vsyscall-int80_32.so $(obj)/vsyscall-sysenter_32.so
-targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so)
-targets += vsyscall-note_32.o vsyscall_32.lds
-
-# The DSO images are built using a special linker script.
-quiet_cmd_syscall = SYSCALL $@
-      cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
-		          -Wl,-T,$(filter-out FORCE,$^) -o $@
-
-export CPPFLAGS_vsyscall_32.lds += -P -C -U$(ARCH)
-
-vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
-		 $(call ld-option, -Wl$(comma)--hash-style=sysv)
-SYSCFLAGS_vsyscall-sysenter_32.so	= $(vsyscall-flags)
-SYSCFLAGS_vsyscall-int80_32.so	= $(vsyscall-flags)
-
-$(obj)/vsyscall-int80_32.so $(obj)/vsyscall-sysenter_32.so: \
-$(obj)/vsyscall-%.so: $(src)/vsyscall_32.lds \
-		      $(obj)/vsyscall-%.o $(obj)/vsyscall-note_32.o FORCE
-	$(call if_changed,syscall)
-
-# We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO.  With ld -R we can then refer to
-# these symbols in the kernel code rather than hand-coded addresses.
-extra-y += vsyscall-syms.o
-$(obj)/built-in.o: $(obj)/vsyscall-syms.o
-$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o
-
-SYSCFLAGS_vsyscall-syms.o = -r
-$(obj)/vsyscall-syms.o: $(src)/vsyscall_32.lds \
-			$(obj)/vsyscall-sysenter_32.o $(obj)/vsyscall-note_32.o FORCE
-	$(call if_changed,syscall)
-
-k8-y                      += ../../x86_64/kernel/k8.o
-stacktrace-y		  += ../../x86_64/kernel/stacktrace.o
-
+ifeq ($(CONFIG_X86_32),y)
+include ${srctree}/arch/i386/kernel/Makefile_32
+else
+include ${srctree}/arch/x86_64/kernel/Makefile_64
+endif

arch/i386/kernel/Makefile_32

+#
+# Makefile for the linux kernel.
+#
+
+extra-y := head_32.o init_task_32.o vmlinux.lds
+
+obj-y	:= process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \
+		ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \
+		pci-dma_32.o i386_ksyms_32.o i387_32.o bootflag.o e820_32.o\
+		quirks.o i8237.o topology.o alternative.o i8253_32.o tsc_32.o
+
+obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
+obj-y				+= cpu/
+obj-y				+= acpi/
+obj-$(CONFIG_X86_BIOS_REBOOT)	+= reboot_32.o
+obj-$(CONFIG_MCA)		+= mca_32.o
+obj-$(CONFIG_X86_MSR)		+= msr.o
+obj-$(CONFIG_X86_CPUID)		+= cpuid.o
+obj-$(CONFIG_MICROCODE)		+= microcode.o
+obj-$(CONFIG_APM)		+= apm_32.o
+obj-$(CONFIG_X86_SMP)		+= smp_32.o smpboot_32.o tsc_sync.o
+obj-$(CONFIG_SMP)		+= smpcommon_32.o
+obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_32.o
+obj-$(CONFIG_X86_MPPARSE)	+= mpparse_32.o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic_32.o nmi_32.o
+obj-$(CONFIG_X86_IO_APIC)	+= io_apic_32.o
+obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
+obj-$(CONFIG_KEXEC)		+= machine_kexec_32.o relocate_kernel_32.o crash_32.o
+obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_32.o
+obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
+obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit_32.o
+obj-$(CONFIG_KPROBES)		+= kprobes_32.o
+obj-$(CONFIG_MODULES)		+= module_32.o
+obj-y				+= sysenter_32.o vsyscall_32.o
+obj-$(CONFIG_ACPI_SRAT) 	+= srat_32.o
+obj-$(CONFIG_EFI) 		+= efi_32.o efi_stub_32.o
+obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
+obj-$(CONFIG_VM86)		+= vm86_32.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+obj-$(CONFIG_HPET_TIMER) 	+= hpet_32.o
+obj-$(CONFIG_K8_NB)		+= k8.o
+obj-$(CONFIG_MGEODE_LX)		+= geode_32.o
+
+obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
+obj-$(CONFIG_PARAVIRT)		+= paravirt_32.o
+obj-y				+= pcspeaker.o
+
+obj-$(CONFIG_SCx200)		+= scx200_32.o
+
+# vsyscall_32.o contains the vsyscall DSO images as __initdata.
+# We must build both images before we can assemble it.
+# Note: kbuild does not track this dependency due to usage of .incbin
+$(obj)/vsyscall_32.o: $(obj)/vsyscall-int80_32.so $(obj)/vsyscall-sysenter_32.so
+targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so)
+targets += vsyscall-note_32.o vsyscall_32.lds
+
+# The DSO images are built using a special linker script.
+quiet_cmd_syscall = SYSCALL $@
+      cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
+		          -Wl,-T,$(filter-out FORCE,$^) -o $@
+
+export CPPFLAGS_vsyscall_32.lds += -P -C -U$(ARCH)
+
+vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
+		 $(call ld-option, -Wl$(comma)--hash-style=sysv)
+SYSCFLAGS_vsyscall-sysenter_32.so	= $(vsyscall-flags)
+SYSCFLAGS_vsyscall-int80_32.so	= $(vsyscall-flags)
+
+$(obj)/vsyscall-int80_32.so $(obj)/vsyscall-sysenter_32.so: \
+$(obj)/vsyscall-%.so: $(src)/vsyscall_32.lds \
+		      $(obj)/vsyscall-%.o $(obj)/vsyscall-note_32.o FORCE
+	$(call if_changed,syscall)
+
+# We also create a special relocatable object that should mirror the symbol
+# table and layout of the linked DSO.  With ld -R we can then refer to
+# these symbols in the kernel code rather than hand-coded addresses.
+extra-y += vsyscall-syms.o
+$(obj)/built-in.o: $(obj)/vsyscall-syms.o
+$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o
+
+SYSCFLAGS_vsyscall-syms.o = -r
+$(obj)/vsyscall-syms.o: $(src)/vsyscall_32.lds \
+			$(obj)/vsyscall-sysenter_32.o $(obj)/vsyscall-note_32.o FORCE
+	$(call if_changed,syscall)
+
+k8-y                      += ../../x86_64/kernel/k8.o
+stacktrace-y		  += ../../x86_64/kernel/stacktrace.o
+